Visit TeamMFactory.com for the best Mazda transmission components!
Visit TeamMFactory.com for the best Mazda transmission components!
Page 3 of 6 FirstFirst 12345 ... LastLast
Results 31 to 45 of 85

Thread: Development Thread - Racing Flywheels and Racing Axles

  1. #31
    Registered Member MFactory's Avatar
    Authorized Vendor


    Join Date
    Sep 2008
    Location
    San Dimas, CA
    Posts
    229
    Development on the axles have been pushed back slightly unfortunately due to other projects. We have new machines coming in next month though, so hopefully that should speed up the process a bit!
    Stephen Yeh - MFactory® Competition Products
    http://www.teamMFactory.com
    -- --

  2. #32
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    This is pretty much the timeline that Stephen and I had come to agree on... late Spring/early Summer 2015 for testing of the prototype.
    Now with regards to the "other projects" I think that there are some of us also anxiously awaiting word on the http://www.mazdas247.com/forum/showt...ential-Shifter

    - Mark -
    '02 Sunburst Yellow P5
    With just a little power adder...

  3. #33
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    I'm awaiting an update from Stephen as it has now been 4 months passed. I would expect some positive developments by now as this is where we were projecting such.
    Stay tuned!!!
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  4. #34
    Super Moderator LinuxRacr's Avatar
    Donated: $15
    Super Moderator

    2001 Mazda MP3

    Join Date
    Sep 2001
    Location
    Dallas/Fort Worth, Texas
    Posts
    12,425
    Can't wait to hear back on this one. I've never broken an axle, I fear this will be the next weak link.
    Performance Mods:[Steedspeed v2. Turbo Manifold] [Precision PTE CEA 5130 Turbo] [Pope 3-inch Downpipe] [Molnar Forged Rods] [Wiseco Forged Pistons (9.1:1)] [NSN Motorsports Thermal Intake Manifold Spacer] [Haltech E6X Stand Alone] [Haltech Boost Controller] [2007 WRX 565cc Dark Blue Injectors] [AEM UEGO 30-4100 Wideband O2 Sensor] [Vibrant 3-inch TurboBack Exhaust with Custom 3-inch mid Pipe] [ ACT Z66-XTSS Clutch] [Fidanza Flywheel] [Synapse Synchronic BOV] [AWR Motor Mounts] [PWR High Performance Radiator PWR1306] [Mazdaspeed Oil Cooler ] [Tein SS Coilover Suspension ] Other Mods: [Intel Atom-based Touchscreen Car PC] [Defi D-Series Boost Gauge] [Nordskog Digital Fuel and Oil Pressure Gauges] [Dave B. Brushed Aluminum Gauge Rings]
    The things we own will eventually end up owning us one way or another....



  5. #35
    Registered Member ZealoustheEnder's Avatar
    Donated: $10

    2003 MazdaSpeed Protege

    Join Date
    Oct 2012
    Location
    Oviedo, Florida
    Posts
    761
    Idk did MP5T ever break an axel he's over 400hp

  6. #36
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259

  7. #37
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    So just a bit of an update on the development of the racing axles. Here is what Stephen has relayed to me in the last while:

    2015-06-11 - "The design on the axles have been finished, and we're setting up the programs just now to run it on the machines."

    2015-06-19 - "just finished a meeting there, and we should hopefully have a sample ready for you to test sometime in Aug."

    Stay tuned!!
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  8. #38
    Registered Member ZealoustheEnder's Avatar
    Donated: $10

    2003 MazdaSpeed Protege

    Join Date
    Oct 2012
    Location
    Oviedo, Florida
    Posts
    761
    How much power will you be putting threw them?

  9. #39
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    My most recent chassis dyno was 300whp. and I have broken 2 drivers side OEM axles.

  10. #40
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    Well here we are at the eve of August. What has Steven got for an update???

  11. #41
    Registered Member MFactory's Avatar
    Authorized Vendor


    Join Date
    Sep 2008
    Location
    San Dimas, CA
    Posts
    229
    Latest from the engineer is that the samples are still on schedule for sometime this month.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  12. #42
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    This is my mid-month... "so how are things coming along?"
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  13. #43
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    Well... let's just hope nothing breaks!
    http://www.mazdas247.com/forum/showt...=1#post6410457
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  14. #44
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    Any news Stephen? We're at the "end of the month"......

  15. #45
    Registered Member mspeedP5's Avatar
    Donated: $20

    '02 Protege5

    Join Date
    May 2004
    Location
    Vancouver Island, BC Canada
    Posts
    1,259
    Got this back by email today....

    "Hey Mark,
    Sorry for the late reply. In Tibet just now, so internet access very limited
    Let me check with the engineer
    Thanks,
    Stephen"


    So we continue to wait....
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

Page 3 of 6 FirstFirst 12345 ... LastLast

Similar Threads

  1. racing seat thread.
    By hawaiian_msp in forum Mazda Protege
    Replies: 154
    Last Post: 01-23-2005, 03:47 PM
  2. Mazdaspeed Development's Racing Support Program
    By spacemonkey in forum Mazdaspeed Protege
    Replies: 16
    Last Post: 03-30-2004, 11:24 PM
  3. Replies: 6
    Last Post: 10-28-2003, 09:10 PM
  4. Friday Night Racing Thread......
    By MoJoeTCM in forum Mazdaspeed Protege
    Replies: 25
    Last Post: 10-19-2003, 01:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •