Mazda of the Month | ENTER NOW for May!

Status
Not open for further replies.

Antoine

Administrator

Please note the following rules & guidelines.
Your cooperation and participation would be greatly appreciated, thank you.​

ENTRY RULES:

* You must own the Mazda you are entering into the contest

* Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc

* If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered

* Once you have entered (posted) your Mazda, you may not withdraw from the contest

* The MOTM contest & rules are subject to change in order to maintain a fair & fun environment for the Mazdas247 Community

ENTRY REQUIREMENTS:

1. Username
2. Name
3. Year and Model
4. Minimum 2 pics / Maximum 5 pics of your Mazda *NO ATTACHMENTS PLEASE!
5. List of CURRENT modifications *NO "WAITING TO BE INSTALLED" MODS PLEASE!

--------------------------------------

EXAMPLE:

Antoine
Antoine *
1995 Eunos Cosmo

3034361674_7fc3f75417_z.jpg


3190674418_cc35ac2a4c_z.jpg


3816167695_72f391b493_z.jpg


- Hi-Per Coolant
- Redline Diff Oil
- Autoexe Intake
- Autoexe Springs
- Volk Racing Rims
- Redline Tranny Fluid
- Blitz Boost Controller
- MAZDASPEED Exhaust
- Speedmaster Engine Oil
- Optional Factory Aerokit
- Paint Protection Coating
- Carbing Front Strut Brace
- Autoexe Spark Plug Wires
- Alpine Navigation Headunit
- Yokohama DNA S.drive Tires
- Defi Boost Gauge & OLED Display
- Upgraded Original Headlights (HID)
- Carbing Cooling Plate (not pictured)
- Custom Center Console and Glovebox

--------------------------------------

PRIZES:

Provided by the International Motor Sports Association | IMSA.com

* Hot Pass for Winner and Guest at one of the Winner's choice of TUDOR Championship races

* Behind the Scenes Tour including being on the Starting Grid for the race, Transporter Tours and a visit to Race Control

* Exclusive Pit Lane access during race

Many thanks to the IMSA | TUDOR United SportsCar Championship for this fantastic prize!

In addition to...

+ Free Basic Custom Shift Boot * Boot compatible with NA & NB Miata, Gen 1 and 2 RX-8, Gen1 and 2 MAZDASPEED3 / Mazda3, 3rd Gen Protege and MAZDASPEED6 / Gen1 Mazda6 * OR + 20% of next purchase up to $200 THANKS TO FattiMotorWorks.com

+ Your Mazda showcased on the Mazdas247 Home Page!

+ A Mazdas247 T-Shirt and a pair of Mazdas247 Decals!

-> Sponsor a Future MOTM...PM Antoine for details!

VOTING RULES:

* Votes only count for the MOTM from those Members that have joined Mazdas247 during the previous month or before

* There is NO tolerance for PERSONAL CAMPAIGNING threads, posts, private messages (PMs), images or links (including signature and or image links). The creation of such ANYWHERE on or off the Internet including Mazdas247 will result in immediate disqualification...If you are disqualified, your entry & poll listing WILL remain but your votes will be removed

* Creating GENERAL "Vote for the MOTM" threads and links is allowed and encouraged

GOOD LUCK AND HAVE FUN!
 
This month's theme is...

Rotary Mazdas (any Mazda powered by a Rotary Engine)

PLEASE DO NOT ENTER if your Mazda does not match the above theme, thank you!

DEADLINE to ENTER is May 20th '14!

NOTE: Please keep this thread ON TOPIC.

Thank you and once again, good luck!
 
Chuyler1
Chris Huyler
1975 Mazda REPU


3-P1050120.jpg


2-P1050118.jpg


P1050237.JPG


orndash.jpg




Josh8.jpg



OVERVIEW

Frame off restoration (mostly) completed by previous owner in 2006
One of only a handful of immaculate examples left on the road today

INTERIOR
Custom orange/white upholstery
Chrome handles and knobs
RetroSound AM/FM/USB radio replaces factory AM radio
Tekonsha Electronic Brake Controller (for towing duh!)
Mazda Banjo Wood Steering Wheel

EXTERIOR
Chrome plated center grill
Chrome plated windshield wipers
Chrome tailgate chains, nuts, bolts, and trim pieces
14x6" Steelies with BF Goodrich A/T tires
Ford Courier Front Springs and KYB shocks
OEM Rear Leaf Springs and Monroe air-adjustible shocks
Class III custom hitch

PERFORMANCE
Original (but not matching numbers) 4-port 13B 1.3 Wankel
Original 4 speed manual transmission
Original
4.375 rear diff
Emissions delete
Racing Beat Street Header
Racing Beat 2.5" Pre-Silencer
Racing Beat 2.5" Muffler
MSD Coils
Drilled Slotted Front Rotors
Original Rear Drum Brakes
 
I have seen this one in person, pictures do not do it justice!
 
Herblenny
Phil Sohn
1993 RX-7

10large_zpsebe4b855.jpg

6large_zpse1988797.jpg

1891459_680061628696930_999877599_o_zps751ae526.jpg

Large3_zps86607c9b.jpg

T6large_zpsd18add10.jpg


Engine:

- Adaptronic ECU for FD PNP (http://www.turblown.net/store/index.php?productID=280)
- Garfinkle Delrin Custom mounts
- Pettit Polished AST
- Koyo N-Flow Radiator
- Custom Carbon Fiber Cooling panel
- Fast acting AirTemp sensor
- BNR Stage 3 Twin Turbos
- Ported 13B-REW engine
- Custom Grounding kit
- Polished Efini Y-pipe
- Polished upper intake manifold
- Polished 90mm Rotary Works Throttle body
- Polished Greddy elbow w/injector ports
- Apexi GT Spec FMIC
- Custom polished pipings By: BNRSupercars.com
- Constant tension T-blot clamps for IC pipings and Intakes.
- HKS seq. BOV
- HKS twinpower ignition amp
- RE-Amemiya SS Dual Dolphin Tip Catback
- SS Pettit DP
- Mazdaspeed ignition wires
- FEED oil filler cap
- FEED coolant filler cap
- Added R1 Dual oil coolers
- Braille light battery
- Braille Verticle mounting kit
- Unorthodox Alternator pulley (red)
- Unorthodox Power steering pulley(blue)
- Exedy Hyper Single Clutch Kit
- Simplified seq twin set up
- Polished hardline intake pipes for secondary intake.
- Ported JDM Upper Intake manifold and polished by David Garfinkle.
- Also all the misc. vacuum ports have been welded shut and cleaned up and polished for cleaner look.
- Pettit Racing water pump pulley
- 2 x 4 blade fan set up for better cooling
- HKS RS intake with KN filters
- Tweakit Racing tensioner pulley kit

Suspension:

- M2 launch kit
- FEED coilovers
- Fender Braces
- Racing Beat sway bar brace
- Racing Beat sway bars (front and rear)
- AutoEXE front brace
- Racing Brake Rear Brake kit with HP+ pad
- Hawk HP+ pads rear
- Newly sandblasted A-arms and other suspension parts
- SakeBomb AP Racing Big Brake Kit with Ferrado pads
- Braided SS brake lines
- Racing Beat sway bushings
- New Delrin bushings for all suspension parts
- Transmission brace
- Raceshop Rollbar
- Dragon’s diff brace
- Rays Engineering Volk Racing TE37SL 189.5 Front and 1810.5 Rear.
- Toyo R888s 255/35 front and 295/30 rear

Interior & Stereo:

- Works Bell Short hub
- Works Bell Quick disconnect
- Works Bell hub lock
- Personal Steering wheel
- Converted Black interior – including, door panels, rear panels, head liner, seat belts, and black main carpet
- RZ floormats
- Rare moon roof interior cover
- JDM rear seats with panels, seat belts, and special rear carpet
- Bride Artis III Navi
- FEED Shift knob
- Red leather stitching shift and ebrake boots
- LED interior lights
- RE-Amemiya steering column pod with 52mm Prosport boost gauge
- JKL Engineering Carbon Fiber Gauge cluster, hood AC panel, shifter,etc (Flattened look)
- JVC 7inch AV system
- RE-Amemiya speedo cluster gauge
- FEED Carbon fiber rear trunk add on.
- Base model hatch cover
- OEM fog light switch to turn FEED HID driving lights
- Carbon look oem door step

Exterior:

- Plasti Dip Storm Cloud Grey exterior (www.DipYourCar.com)
- Carbon Vented hood
- APR GT300 with custom aluminum stands by Adam Griffith
- One off Feed Carbon Gas door (Shine Auto)
- Feed Type 2R front bumper
- Feed Carbon fiber canards
- Feed Carbon Fiber side skirts
- Feed wide front fenders
- FEED rear wide flares
- Rotary Extreme hood dampers
- R-magic oil cooler ducts
- FEED front tow hook
- Adam Griffith rear tow hook
- RE-Amemiya Pro Carbon rear diffuser
- Custom LED tail lights
- Custom rear bumper CF signal covers
- Rare glass moon roof
- LED signal lights in FEED signals
- HID FEED Signal lights
- Spirit R fender badges
- Efini front are rear badges
- Carbon look rear bumper lights
- Carbon fiber FEED gas door (one off made)
- APR Carbon Fiber side Mirrors
- Custom front canard add on
- Carbon Cooling panel (custom, made by me)
- LED Front bumper strips
- R-Magic HID head lights
- FEED door handles
- Carbon Fiber back of the door handle covers.
- Back Off 3rd light flasher
- ShineAuto rear tail light lip
- Feed carbon Fiber bumper guard by Shine Auto
 
so ya whenever you decide to sell that repu please let me know haha.

Looks amazing man, love those trucks.
 
Status
Not open for further replies.
Back