Koni Yellows - What's your settings

I've only seen one post that I recall with people with Koni yellows mentioning there settings. Figure I'd reach out and see if there's now more and find out who set it at what.

Right now I have just the rears and they're set to 1.5 turns from full firm. I'm doing the fronts next. The springs are stock 2009.

So what are your Koni's set to (front and rear)? And what springs are you using?

Oh, and this is for Mazda5 owners (in case someone inadvertently ends up here).

I am using stock spring and tripoint engineering 32 mm RSB. I at 7/8 turn up front and 1/2 turn in the rear.

Tried 1 full turn in the back and it felt twitchy because of the oversize RSB. Went back to 1/2 turn and it feels better. The front spring are definetly feel too soft. I do not want to lower the car so right now I do not have any option.