Post Pictures of Your CX-5 Mods, Upgrades and Accessories!

Flares

10347415_1000248123322885_1481883622990006921_n_zpsmbd29fe8.jpg
[/URL][/IMG]Getting the flares fitted and painted.

Hey! Can you tell me where you got the fenders? Can't seem to find any wide ones I like. Is your cx-5 matte paint or plasti dipped? Looks good!! Thanks
 
7a2bcc053f5b78cb13f97eb04fd7c58c.jpg


Soon soon[emoji5]

101


Sent from my iPhone using Tapatalk
Welcome the BBK club. I'm jealous of that yellow. My powdercoating on my Corksports isn't holding up well. Might have to get it done again at some point.
f5de16e401416eaebd3324676bcf7519.jpg


Sent from my VS995 using Tapatalk
 
Welcome the BBK club. I'm jealous of that yellow. My powdercoating on my Corksports isn't holding up well. Might have to get it done again at some point.
f5de16e401416eaebd3324676bcf7519.jpg


Sent from my VS995 using Tapatalk

BBK Club I like[emoji1360][emoji23] If I could use the corksport in the EU I would have considered them two years ago, but unfortunately not so I had to wait till someone brings out a reliable product with a good price tag.

I like yours!!

So a friend went to Netherlands VMAXX shop every few weeks since January, give them his CX-5 for a few days that they can produce one for CX-5. That procedure finished a week ago with official legitimation from TV for EU, so now it's available. On his one is not even a production number. I have one of the first five, the first yellow!
Soooo Kooool!

101
 
Draw-Tite 76138 Installed

Hey, new Canadian member here with a Canadian spec 2016.5 CX-5 GX with Convenience Package 6AT FWD, manufactured Nov 2016.

Had it for almost four weeks now and installed the Draw-Tite 76138 hitch in the driveway yesterday. Nice and fresh product from 04-26-17 per its label.

Electricals are next, and debating whether to use the Tekonsha 118563 or the Mazda 0000-8E-R04, or maybe a bit from both kits. Might seek out the proper spec pin connectors and use the Tekonsha kit combined with the vehicle's existing wiring from the engine bay to the cargo area. (Not a fan of the Mazda kit's tap connectors, nor Tekonsha's running a wire via the exterior underneath route.)

Hitch%20parts_zpslrdskuiq.jpg


Muffler%20view_zps35o4hjjl.jpg


Hitch%20side_zps1vhfrwnc.jpg


Rear%20view%20hitch_zpscwfhb6jc.jpg
 
Last edited:
Got bored wanted to test wrapping stuff before I set off onto bigger projects. Looks good and its the little things that count.
5dc1629cf14ae2056d41e97ce39db5bb.jpg
8a3ae61119319cd594906c1e49566f09.jpg
 
Anybody know how low can a Genuine Mazda Remote start for a 2016 grand touring is?
They're selling the whole thing with installation in my area for around $500-800 and only one key FOB (which is understandable)
but I mean, that's too much isn't it?
 
500 is ok /fair I think 350 the modul + 2h for a professional to install it -800 naja I don't know if I would let them do it for this price

Cheers 101
 
Put the rails and rack on. I used to run the rails before I got the spoiler but thought it looked to busy with all of it on at once.
FfSpEUc.jpg

OzTPJTO.jpg
 
95955fa8e94f0a5898b24b00f7600ecf.jpg


a2f33fc6834dd7b7fb8a03171d825579.jpg


3bf07d7a3dec2cddda12b6ef89103039.jpg


be718c4b996901ac65353267bcfe5cc7.jpg


0601233cd897d5d71929312dc0ae50f7.jpg


a4d80850e615fee6aefdc4a74d09f22f.jpg


91a6673eeaa4fea87bcd8f791cd10c7e.jpg


New member here. Posted in what did you do to your cx-5 today as well. Matte black tint on the third brake light. Incandescent versus LED turn signal on the rear. Interior is also upgraded with LED ebay kit.
 
Back