Timeline of Changes & Mods for my Mazda3!

Installed Spoiler King's rubber Spoiler Extension....This one is a lot "beefier" than my previous one I had...

23644021435_0fa0c19e28_h.jpg
 
Purchased these 7/8" Nickel Plated finishing trim rings for the holes I drilled into the Front & Rear bumpers a while ago...

Operation Punk Face & Ass! :D

23732749005_99c862e3da_o.jpg


23364786969_09af2ffd2a_h.jpg
 
Re-Themed my Valve Cover to look like a Duracell Battery....

24762797159_506cc93285_h.jpg



Installed Blue Tinted Convex Side Mirrors from TheSpeedline.com, these are also Fog & Glare resistant!


24507308583_a517436f68_b.jpg
 
I love how you did your car Goldie! Thats the same color I like and its so clean and not ricey! I have an 06 Mazda that has the usual rust and its rusting under the vehicle. I am just wondering if it would be worth doing body work or getting one with less rust.
 
Accidentally destroyed my Front Lip....So went in a different direction....Fixed the damaged Winglets and re-installed them directly to the front bumper this time...Then I Designed my own Front Lip piece that goes in the middle part fo the bumper to balance out everything else...I like how it turned out!

CustomLip_zpshx3ptswe.jpg


25755797750_39f314dba5_h.jpg


25755440510_9ca498f282_h.jpg
 
Did more Vinyl work on the front end.....Added Black Satin vinyl above my LED DRL slot area for a more aggressive feel, also add Black Brush Aluminum to the Front Lip piece along w/ Copper Metallic along the edge part too....Pretty much satisfied how the Front-End looks now!

26257309296_93b7516fb8_h.jpg
 
Made some Mini Rear Bumper flares from the same Black Komatex material....Might adjust them or Overlay them w/ some vinyl later....

26647124072_00140328f7_h.jpg


26136672463_95b7e503f5_h.jpg
 
Purchased a set of MazdaSpeed 3 cloth black seats for an awesome deal!

29923884093_3b49489417_b.jpg


Unboxed ready to go!....


29923880673_d1ffcbba81_b.jpg


Installed!....What an amazing driving experience now!..Butt doesn't slide around anymore....haha


29923875853_a2a228905d_b.jpg
 
Cosmetic change in the LED reverse bulbs....Currently had the Samsung CREE LED bulbs...Replaced with VLED Brand LED bulbs...VLED ones are twice as bright!...


30869550161_8b30fb3aba_b.jpg


30921840086_f9803d7240_b.jpg


30656158100_381cc4b4e8_b.jpg
 
2017:

2 New things for Penny at the start of the new year!

Replaced cheaply made hood dampeners that came with the hood kit by Sokie Tech...they gas inside of them failed so found these at Pepboys a lot stronger ones I found!

20170106_1553431_zpsqax4ptc9.jpg



Then replaced my Phillips Brand LED DRLs due to when getting murdered by a traffic cone I hit on a rainy day...Bought a new style LED lights to fit..Made custom brackets for them.

20170107_1117391_zpsr7xdapsk.jpg

20170107_1117301_zpsadpze9jk.jpg


31396469944_9f5804e65f_b.jpg
 
Didn't like how "dim" the LED DRLs were so bought a different pair...Similar to the old ones not as long in length...I like them better!
I still think Phillips Brand DRLs are way superior in design and light color though...


s-l1600_zps18zpj5qx.jpg


20170116_090153-011_zpsbc5lcfxl.jpg


32311055176_86a04c054c_b.jpg
 
Back