Well after owning the MSP for almost 5 years I finally decided to start a build thread. I bought the car salvaged with a little under 18,000 miles on her. She got broken into around 30,000 miles. Around 115k rod bearings failed. It made a little glitter oil. I had to buy another crank, clevite rod bearings, and clevite main bearings. Around 120k the oil pump took a s*** while at a autoX event and made a lot of glitter oil. Still have to find out if it is rebuildable or have to find a donor block. For now I bought a friends 223k mile motor and gave it stock MSP boost for the first time. She runs like a champ even with the SSAFC. Guessing I have close to 200whp because of my number last year with almost no power mods on the dyno pushing 161tq and 159 hp.
Mods that came with the car:
-Mazda3 shift knob
-AEM CAI
-Aftermarket SMIC (don't know which brand)
-Aluminum hot/cold pipes
-Catless mid-pipe
-Red top optima battery
-Dual gauge steering pods
-Autometer oil pressure guage
-Autometer boost guage
-Enkei Evo5
-Stock Racing Harts
Pics when I bought her:
<a href="http://www.flickr.com/photos/oacrally2003/3563491539/" title="April 2008 14 by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2469/3563491539_239f18bd9b_z.jpg" width="640" height="480" alt="April 2008 14"></a>
<a href="http://www.flickr.com/photos/oacrally2003/3564279432/" title="April 2008 17 by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2476/3564279432_8fe8c66f0b_z.jpg" width="640" height="480" alt="April 2008 17"></a>
<a href="http://www.flickr.com/photos/oacrally2003/3563471467/" title="April 2008 16 by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2425/3563471467_9dfe16a8cd_z.jpg" width="640" height="480" alt="April 2008 16"></a>
The car looked so clean!
Then the paint started chipping off and the clear started peeling. Probably a cheepo MACO paintjob.
Mods I took off or sold:
-Dual steering guage pods
-Aftermarket SMIC
-Catless mid-pipe
-Enkei EVO5
My first mods:
-Spectre blue air filter
-RalliArt racing seats (knock offs)
-Custom seat brackets
-OEM lateral links (replace the bents arms that were on the car when I bought it)
-Spay painted the calipers anodized blue
-Spray painted RH's black
-AWR 21.5mm rear sway bar
-AWR rear adj. endlinks
-AWR oil pan
-3" vibrant exhaust
-Techna braided brake lines
-Drilled and slotted rotors
-Porterfield race pads
-New Tokico blue shocks
-Tokico lower springs
Pics after some of the mods: (Nothing visually changed)
<a href="http://www.flickr.com/photos/oacrally2003/3634280982/" title="Picture 031 by rally2003, on Flickr"><img src="http://farm4.staticflickr.com/3394/3634280982_8907101389_z.jpg" width="640" height="480" alt="Picture 031"></a>
Because I'm an idiot I sold the rear lip because my vibrant exhaust was melting to it EPIC FAIL!
<a href="http://www.flickr.com/photos/oacrally2003/3634275736/" title="Picture 025 by rally2003, on Flickr"><img src="http://farm4.staticflickr.com/3618/3634275736_0c0ef851e1_z.jpg" width="640" height="480" alt="Picture 025"></a>
Fitted my old Eclipse wheels with 205/40/16 Falken R615K for my 2nd years of SCCA autoX in STX
Yes that is on 3 wheels!
<a href="http://www.flickr.com/photos/oacrally2003/5697320561/" title="Chrysler Event 1 -2011(2) by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2308/5697320561_23de21b2c6_z.jpg" width="640" height="426" alt="Chrysler Event 1 -2011(2)"></a>
<a href="http://www.flickr.com/photos/oacrally2003/5697895802/" title="Chrysler Event 1- 2011(4) by rally2003, on Flickr"><img src="http://farm6.staticflickr.com/5145/5697895802_459082b41e_z.jpg" width="640" height="425" alt="Chrysler Event 1- 2011(4)"></a>
New magnets
<a href="http://www.flickr.com/photos/oacrally2003/5733503371/" title="SCCA May 15th by rally2003, on Flickr"><img src="http://farm6.staticflickr.com/5145/5733503371_e0cf5f8cbb_z.jpg" width="640" height="480" alt="SCCA May 15th"></a>
Newer mods:
-Mishimoto FMIC
-Mishimoto full radiator
-Mishimoto dual 12" fan shroud
-More aluminum hot/cold pipes
-626 ported and polished intake manifold
-SSAFC
-Custom rear sway bar bushings
-AWR trailing arms
-AWR coilovers
-AWR adj. front end links
-AEM UEGO wideband
-SU front motor mount
-SU rear motor mount
-DGM cf hood
-Hankook Ventus Rcomps (track tires)
-Clevite rod bearings
-Clevite mainbearings
-223k mile FS motor and still kicking
Last photo shoot I did when I got a sponsorship from Mishimoto
<a href="http://www.flickr.com/photos/oacrally2003/6942691662/" title="DSCF6120 by rally2003, on Flickr"><img src="http://farm8.staticflickr.com/7116/6942691662_d011f8f124_z.jpg" width="640" height="480" alt="DSCF6120"></a>
<a href="http://www.flickr.com/photos/oacrally2003/6942689268/" title="DSCF6176 by rally2003, on Flickr"><img src="http://farm8.staticflickr.com/7136/6942689268_5ac5608677_z.jpg" width="640" height="480" alt="DSCF6176"></a>
<a href="http://www.flickr.com/photos/oacrally2003/7088758477/" title="DSCF6164 by rally2003, on Flickr"><img src="http://farm8.staticflickr.com/7048/7088758477_c91c452406_z.jpg" width="640" height="480" alt="DSCF6164"></a>
<a href="http://www.flickr.com/photos/oacrally2003/7088757567/" title="DSCF6154 by rally2003, on Flickr"><img src="http://farm6.staticflickr.com/5332/7088757567_af55bb1300_z.jpg" width="640" height="480" alt="DSCF6154"></a>
Parts I'm waiting on:
-3" Pope DP
-AWR side motor mounts
Future plans:
-Rebuilt forged FS
-Mora BOOST! Probably only around 10-12psi
-GT28 turbo
-LOTS OF CF! Buhaha, Buhahahahaha, Buhahahahahahahaha!
Complete list of mods on now:
-Mazda3 shift knob
-AEM CAI
-Aluminum hot/cold pipes
-Catless mid-pipe
-Red top optima battery
-Dual gauge steering pods
-Autometer oil pressure guage
-Autometer boost guage
-Black Racing Harts with Yokohama tires
-Spectre blue air filter
-RalliArt racing seats (knock offs)
-Custom seat brackets
-Custom radio bezel
-OEM lateral links (replace the bents arms that were on the car when I bought it)
-Anodized blue calipers
-AWR 21.5mm rear sway bar
-AWR rear adj. endlinks
-3" vibrant exhaust
-Techna braided brake lines
-Drilled and slotted rotors
-Porterfield race pads
-Mishimoto FMIC
-Mishimoto full radiator
-Mishimoto dual 12" fan shroud
-More aluminum hot/cold pipes
-626 ported and polished intake manifold
-Split Second Air Fuel Controller
-Custom altered Energy Suspension rear sway bar bushings
-AWR trailing arms
-AWR coilovers
-AWR adj. front end links
-AEM UEGO wideband
-SU front motor mount
-SU rear motor mount
-DGM cf hood
-12" Battery
-BFG RS1 255's front
-BFG RS1 225's rear
-223k mile FS motor and still kicking
Removed:
-A/C and lines to the firewall
-PS and lines to the rack (depowered)
-stereo and speakers
More to come, especially exterior! I'm sure I forgot some stuff, but I'll update it as I go. Thanks for viewing!
Link to de-powering the rack and pinion.
http://flyinmiata.com/tech/depower.php?x=1
Link for data logging with the torque app using a split second air fuel controller that doesn't have data logging.
http://www.optimaforums.com/forum/6...p-others-discussion-what-you-got-6-print.html
Mods that came with the car:
-Mazda3 shift knob
-AEM CAI
-Aftermarket SMIC (don't know which brand)
-Aluminum hot/cold pipes
-Catless mid-pipe
-Red top optima battery
-Dual gauge steering pods
-Autometer oil pressure guage
-Autometer boost guage
-Enkei Evo5
-Stock Racing Harts
Pics when I bought her:
<a href="http://www.flickr.com/photos/oacrally2003/3563491539/" title="April 2008 14 by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2469/3563491539_239f18bd9b_z.jpg" width="640" height="480" alt="April 2008 14"></a>
<a href="http://www.flickr.com/photos/oacrally2003/3564279432/" title="April 2008 17 by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2476/3564279432_8fe8c66f0b_z.jpg" width="640" height="480" alt="April 2008 17"></a>
<a href="http://www.flickr.com/photos/oacrally2003/3563471467/" title="April 2008 16 by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2425/3563471467_9dfe16a8cd_z.jpg" width="640" height="480" alt="April 2008 16"></a>
The car looked so clean!
Then the paint started chipping off and the clear started peeling. Probably a cheepo MACO paintjob.
Mods I took off or sold:
-Dual steering guage pods
-Aftermarket SMIC
-Catless mid-pipe
-Enkei EVO5
My first mods:
-Spectre blue air filter
-RalliArt racing seats (knock offs)
-Custom seat brackets
-OEM lateral links (replace the bents arms that were on the car when I bought it)
-Spay painted the calipers anodized blue
-Spray painted RH's black
-AWR 21.5mm rear sway bar
-AWR rear adj. endlinks
-AWR oil pan
-3" vibrant exhaust
-Techna braided brake lines
-Drilled and slotted rotors
-Porterfield race pads
-New Tokico blue shocks
-Tokico lower springs
Pics after some of the mods: (Nothing visually changed)
<a href="http://www.flickr.com/photos/oacrally2003/3634280982/" title="Picture 031 by rally2003, on Flickr"><img src="http://farm4.staticflickr.com/3394/3634280982_8907101389_z.jpg" width="640" height="480" alt="Picture 031"></a>
Because I'm an idiot I sold the rear lip because my vibrant exhaust was melting to it EPIC FAIL!
<a href="http://www.flickr.com/photos/oacrally2003/3634275736/" title="Picture 025 by rally2003, on Flickr"><img src="http://farm4.staticflickr.com/3618/3634275736_0c0ef851e1_z.jpg" width="640" height="480" alt="Picture 025"></a>
Fitted my old Eclipse wheels with 205/40/16 Falken R615K for my 2nd years of SCCA autoX in STX
Yes that is on 3 wheels!
<a href="http://www.flickr.com/photos/oacrally2003/5697320561/" title="Chrysler Event 1 -2011(2) by rally2003, on Flickr"><img src="http://farm3.staticflickr.com/2308/5697320561_23de21b2c6_z.jpg" width="640" height="426" alt="Chrysler Event 1 -2011(2)"></a>
<a href="http://www.flickr.com/photos/oacrally2003/5697895802/" title="Chrysler Event 1- 2011(4) by rally2003, on Flickr"><img src="http://farm6.staticflickr.com/5145/5697895802_459082b41e_z.jpg" width="640" height="425" alt="Chrysler Event 1- 2011(4)"></a>
New magnets
<a href="http://www.flickr.com/photos/oacrally2003/5733503371/" title="SCCA May 15th by rally2003, on Flickr"><img src="http://farm6.staticflickr.com/5145/5733503371_e0cf5f8cbb_z.jpg" width="640" height="480" alt="SCCA May 15th"></a>
Newer mods:
-Mishimoto FMIC
-Mishimoto full radiator
-Mishimoto dual 12" fan shroud
-More aluminum hot/cold pipes
-626 ported and polished intake manifold
-SSAFC
-Custom rear sway bar bushings
-AWR trailing arms
-AWR coilovers
-AWR adj. front end links
-AEM UEGO wideband
-SU front motor mount
-SU rear motor mount
-DGM cf hood
-Hankook Ventus Rcomps (track tires)
-Clevite rod bearings
-Clevite mainbearings
-223k mile FS motor and still kicking
Last photo shoot I did when I got a sponsorship from Mishimoto
<a href="http://www.flickr.com/photos/oacrally2003/6942691662/" title="DSCF6120 by rally2003, on Flickr"><img src="http://farm8.staticflickr.com/7116/6942691662_d011f8f124_z.jpg" width="640" height="480" alt="DSCF6120"></a>
<a href="http://www.flickr.com/photos/oacrally2003/6942689268/" title="DSCF6176 by rally2003, on Flickr"><img src="http://farm8.staticflickr.com/7136/6942689268_5ac5608677_z.jpg" width="640" height="480" alt="DSCF6176"></a>
<a href="http://www.flickr.com/photos/oacrally2003/7088758477/" title="DSCF6164 by rally2003, on Flickr"><img src="http://farm8.staticflickr.com/7048/7088758477_c91c452406_z.jpg" width="640" height="480" alt="DSCF6164"></a>
<a href="http://www.flickr.com/photos/oacrally2003/7088757567/" title="DSCF6154 by rally2003, on Flickr"><img src="http://farm6.staticflickr.com/5332/7088757567_af55bb1300_z.jpg" width="640" height="480" alt="DSCF6154"></a>
Parts I'm waiting on:
-3" Pope DP
-AWR side motor mounts
Future plans:
-Rebuilt forged FS
-Mora BOOST! Probably only around 10-12psi
-GT28 turbo
-LOTS OF CF! Buhaha, Buhahahahaha, Buhahahahahahahaha!
Complete list of mods on now:
-Mazda3 shift knob
-AEM CAI
-Aluminum hot/cold pipes
-Catless mid-pipe
-Red top optima battery
-Dual gauge steering pods
-Autometer oil pressure guage
-Autometer boost guage
-Black Racing Harts with Yokohama tires
-Spectre blue air filter
-RalliArt racing seats (knock offs)
-Custom seat brackets
-Custom radio bezel
-OEM lateral links (replace the bents arms that were on the car when I bought it)
-Anodized blue calipers
-AWR 21.5mm rear sway bar
-AWR rear adj. endlinks
-3" vibrant exhaust
-Techna braided brake lines
-Drilled and slotted rotors
-Porterfield race pads
-Mishimoto FMIC
-Mishimoto full radiator
-Mishimoto dual 12" fan shroud
-More aluminum hot/cold pipes
-626 ported and polished intake manifold
-Split Second Air Fuel Controller
-Custom altered Energy Suspension rear sway bar bushings
-AWR trailing arms
-AWR coilovers
-AWR adj. front end links
-AEM UEGO wideband
-SU front motor mount
-SU rear motor mount
-DGM cf hood
-12" Battery
-BFG RS1 255's front
-BFG RS1 225's rear
-223k mile FS motor and still kicking
Removed:
-A/C and lines to the firewall
-PS and lines to the rack (depowered)
-stereo and speakers
More to come, especially exterior! I'm sure I forgot some stuff, but I'll update it as I go. Thanks for viewing!
Link to de-powering the rack and pinion.
http://flyinmiata.com/tech/depower.php?x=1
Link for data logging with the torque app using a split second air fuel controller that doesn't have data logging.
http://www.optimaforums.com/forum/6...p-others-discussion-what-you-got-6-print.html
Last edited: