mikeregister
Member
- :
- 2013 Mazda CX-5 GT
I decided to go into the diagnostic mode on my CX-5 too see what kind of codes I could find. I'm sure some of you have already done this. But, here is a compiled list of what I found. As you can see I have no idea what half of this stuff is so, if you know what something does let me know and I will update the OP. Also, if you found a code that I didn't let me know and I will also update. I noticed some codes only worked if certain things were on. My CX-5 is the Grand Touring Edition it does not have Navigation installed so maybe there are more codes that I couldn't access.
I didn't really notice anything useful in here at all to myself at the moment. But, one thing that could be useful later on is the use of code 81 to update your software.
I have also created an album with a picture of every screen I could find incase anyone wants to compare too see if their are any differences in different models or maybe if someone has a newer firmware update.
2013 Mazda CX-5 Diagnostic Codes Picture Album
Anyway to access the Diagnostic Mode (not sure if thats what its really called but, that's what I'm calling it) Press the Power/Volume button and the Seek Up button together. (Press the Power/Volume button slightly earlier)
1 - Test Screen (Tapping tests different colors)
2 - Check SW (Not sure what this is)
3 - Check Speaker (Plays music one speaker at a time to make sure all are working)
4 - Signal Strength (Displays signal strength of radio)
5 - Antenna Cont (Displays whether radio antenna is on or off)
6 - Maker Code (Not sure)
7 - Check Amp (Guess it checks the Amplifier some how?)
9 - Seek Test (Tests seek function on radio)
10 - Software Version (Shows version numbers for SH, R32, USB and SAT) (Not sure what SH and R32 are)
11 - CD Test (Tests CD player)
14 - Rotary Encoder (In this mode if you turn your Volume Up/Down or turn your Tune knob Left/Right it will show you it's working just a diagnostic feature (Thanks: bigi1983)
15 - Vehicle and Navi Signal Check (Can ensure your GPS is getting Signal here)
16 - Connect Info Clear (Not sure)
17 - View Configuration
20 - Modem Setting (Turn Modem On/Off For TomTom Live Services) (Only display on models with Navigation)
37 - HF ACU Connection (Possibly something for the satellite radio) (Thanks: stromdriver)
38 - HF Soft Version (Possibly something for the satellite radio) (Thanks: stromdriver)
81 - Soft Update (Assuming this is where you would go for Firmware updates)
83 - Calibration (Calibrate your touch screen)
84 - BD Address (Not Sure)
85 - Register Edit (Not Sure)
86 - Just shows line on screen (Not sure the point of this)
87 - Displays 3 Squares that say NG (Not clue what this is for)
88 - Check SW Info (Not sure)
89 - BER TEST (BER = Bit Error Rate, is a measure of quality of a digital transmission) (Thanks: Trent_CX5)
92 - Turns on Rear Camera
Once again please let me know if there is anything I can add to this thread to make it better!
I didn't really notice anything useful in here at all to myself at the moment. But, one thing that could be useful later on is the use of code 81 to update your software.
I have also created an album with a picture of every screen I could find incase anyone wants to compare too see if their are any differences in different models or maybe if someone has a newer firmware update.
2013 Mazda CX-5 Diagnostic Codes Picture Album
Anyway to access the Diagnostic Mode (not sure if thats what its really called but, that's what I'm calling it) Press the Power/Volume button and the Seek Up button together. (Press the Power/Volume button slightly earlier)
1 - Test Screen (Tapping tests different colors)
2 - Check SW (Not sure what this is)
3 - Check Speaker (Plays music one speaker at a time to make sure all are working)
4 - Signal Strength (Displays signal strength of radio)
5 - Antenna Cont (Displays whether radio antenna is on or off)
6 - Maker Code (Not sure)
7 - Check Amp (Guess it checks the Amplifier some how?)
9 - Seek Test (Tests seek function on radio)
10 - Software Version (Shows version numbers for SH, R32, USB and SAT) (Not sure what SH and R32 are)
11 - CD Test (Tests CD player)
14 - Rotary Encoder (In this mode if you turn your Volume Up/Down or turn your Tune knob Left/Right it will show you it's working just a diagnostic feature (Thanks: bigi1983)
15 - Vehicle and Navi Signal Check (Can ensure your GPS is getting Signal here)
16 - Connect Info Clear (Not sure)
17 - View Configuration
20 - Modem Setting (Turn Modem On/Off For TomTom Live Services) (Only display on models with Navigation)
37 - HF ACU Connection (Possibly something for the satellite radio) (Thanks: stromdriver)
38 - HF Soft Version (Possibly something for the satellite radio) (Thanks: stromdriver)
81 - Soft Update (Assuming this is where you would go for Firmware updates)
83 - Calibration (Calibrate your touch screen)
84 - BD Address (Not Sure)
85 - Register Edit (Not Sure)
86 - Just shows line on screen (Not sure the point of this)
87 - Displays 3 Squares that say NG (Not clue what this is for)
88 - Check SW Info (Not sure)
89 - BER TEST (BER = Bit Error Rate, is a measure of quality of a digital transmission) (Thanks: Trent_CX5)
92 - Turns on Rear Camera
Once again please let me know if there is anything I can add to this thread to make it better!
Last edited: