N nikbrewer Member May 31, 2012 #1 I have some motegi traklite 1.0 15x7 ET 35 wheels. I am mounting on 205/50/15 nitto neogens. Will the poke? Will they rub with eibach springs?
I have some motegi traklite 1.0 15x7 ET 35 wheels. I am mounting on 205/50/15 nitto neogens. Will the poke? Will they rub with eibach springs?
E Erv Member : 2011 MZ2 Sport May 31, 2012 #2 I run 15x7.5 +37 Konig Lightspeeds with 195/50/15 toyo's which run wide for their size and they don't rub, and my car is alot lower than just lowering springs.
I run 15x7.5 +37 Konig Lightspeeds with 195/50/15 toyo's which run wide for their size and they don't rub, and my car is alot lower than just lowering springs.
M Max Archer Member : '12 Mazda 2 Touring 5MT/'87 325IS 2DR 5MT May 31, 2012 #3 It should be fine, I have 15x7 +30 and they just barely poke in the front, so little you can only see it if you get down on the ground and look at the car exactly from in front or behind. Here's pics: http://www.mazdas247.com/forum/show...ment-15x7-30&p=5954996&viewfull=1#post5954996 949 Racing 6ULs are 15x7 +36 as well, and fit so well that Mazda uses them on their show cars.
It should be fine, I have 15x7 +30 and they just barely poke in the front, so little you can only see it if you get down on the ground and look at the car exactly from in front or behind. Here's pics: http://www.mazdas247.com/forum/show...ment-15x7-30&p=5954996&viewfull=1#post5954996 949 Racing 6ULs are 15x7 +36 as well, and fit so well that Mazda uses them on their show cars.
CorkSport 2010 Mazdaspeed 3 Authorized Vendor : All Mazdas! May 31, 2012 #4 We are running 15x7 +25 wheels with 205/55/15 Kumho EXS on the CorkSport 2 with no rubbing on H&R springs. I doubt you will have any rubbing. -Derrick
We are running 15x7 +25 wheels with 205/55/15 Kumho EXS on the CorkSport 2 with no rubbing on H&R springs. I doubt you will have any rubbing. -Derrick
U UnZipHer15 Member : Mazda 2, Miata, & P5 May 31, 2012 #5 i'm running 16x8 +30 and barely poke in the front and had to space the rear to get it to poke
C CRG Racer24 Member : '11 Mazda2 GX-Convenience Pkg.. Warranty Voiding Mods Jun 4, 2012 #7 Take a look at pics of my car in the pics/vids thread. I'm running a 15x7 +36 lowered a LOT more than Eibachs
Take a look at pics of my car in the pics/vids thread. I'm running a 15x7 +36 lowered a LOT more than Eibachs