MSP, MP3, P5, Protege Parts. Motor Mounts, Body Panels, Stock Part Out, FS-DE Parts

Time for another wave of parts from my 2001 Proteg MP3. Please feel free to PM me with any inquiries.

1) When you PM me, please quote your replies. I do not have time to search my inbox every time I get a replied message, to remember which parts you want, your offers, etc... This will help me out a lot, so it is greatly appreciated.

2) Feel free to make offers. I'm more than willing to work deals, especially if you're buying multiple items. Just please save my time and your's and skip the lowballs...

3) I am busy, so I may not get back to you immediately that day. However, I am not a flake and I will ship items out as quickly as I can get to them.
(drinks)


AVAILABLE PARTS:
Prices do not include shipping!!!

The car had 116k miles to give you an idea of the wear on most of these parts. The motor was replaced at 83k miles and now has around 50k miles of wear. The transmission was replaced at 98k miles and something is shredded. The fork might have broken again and I'm guessing 3rd gear is all f'ed, but I don’t know for sure.

Exterior
03 MSP/MP3 Wing (HZ MP3 Yellow): $70
Trunk Bezel (Yellow Mica): $8
Stock Tail Lights (w/ Blue Batmobile Overlays on Reverse Lights): $35 ea.
MP3 Engine cover (valve cover's cover): $20
Foldable, Power Side Mirrors (black): $20 ea.
Rear bumper w/ Rear Lip (HZ): SOLD

Interior
Front A Pillars: $10
Door Sills: $15
Door Panels & Hardware: SOLD

Electrical Components
Fuse Box: $25
(2) Coil Packs: $10
NGK Ignition Wires: SOLD
(4) NGK spark plugs (extended ZE plugs):
Aftermarket Battery Tie Down (twin hooked): $5

Mechanical Components
Exedy Stage 1 Clutch (~35k miles): SOLD
Flywheel: SOLD
Clutch Slave Cylinder:
Throw Out Bearing (G15 (2002.5+)): $20
Output shaft: $30
Fuel Injectors (w/ new o-ring set): $9
Fuel Injectors : $6
Throttle Body (needs 2 IAC screws):
Radiator: SOLD
Radiator Fans: SOLD
A/C Condenser: $20
Water Pump:
Starter Motor: $30
Alternator: SOLD
Power Steering Pump: $15
PC Valve: $3
Drive Belts (Alt/WP & AC/PS):
Timing Belt (35k miles):

AWR Motor Mounts
AWR Front Mount (70 duro) (~8k miles): SOLD
AWR Rear Mount (70 duro) (~11k miles): SOLD
AWR Passenger Mount (70 duro) (~3k miles): SOLD
AWR Transmission Mount (70 duro) (~3k miles): SOLD

FS-DE Motor (~50k miles)
Valve Cover: $50
Intake & Exhaust Cam: $50
Cam Gears: $25
Cylinder Head:
Cylinder Head Bolts:
Oil pan:
Crankshaft:
Crankshaft Bearings:
Pistons:
Piston Rings:
Valves:
Lifters:
Retainers:
Feel free to make offers on any of the engine parts. I am tearing it down as time allows. If you request a part, I will be motivated to get it for you.

Wheels/Tires
(2) Stock MP3 Wheels (prepped and polished waiting for paint): $30 ea.
MP3 Center Caps: SOLD

Miscellaneous
Windshield Washer Fluid Reservoir (w/ pump): $20
(3) Windshield Washer Nozzles:
Coolant Overflow Reservoir: SOLD
Trunk Cargo Net: SOLD
Mazda Emblem:
Radio Connect Wires (Mazda side):
Radio Bracket:
Narrowband A/F gauge: SOLD
Lugnuts:
Shifter Pivot Hardware:
Exhaust Hangers:
Various Gaskets:
Miscellaneous Hardware:
 
Last edited:
Is anyone else having issues with their buys? I feel like this guy grabbed me. As of this post, he hasn't logged on since the 22nd. I payed for my part May 4th, no part in the mail and no way to get a hold of him.
 
Do you have the oil dip stick?

Yes, just go to a junk yard though. It's not worth my time to ship... You will save money that way, as well.

im interested in the side view mirrors anyway u can send me a better pic please or post one thanks please PM me i dont always check this. thanks

Check PMs

How about the grille emblem? Was that sold too? :/

The grille itself was sold years ago. I had a CF grille.

PM sent on some parts. Thanks

Replied.

I was wondering about. The valve cover. Do you still have it.
Thanks

Yes, check PMs

any shipping on them door panels?

Yes, check your PMs. They arrived at your local greyhound station today.

Is anyone else having issues with their buys? I feel like this guy grabbed me. As of this post, he hasn't logged on since the 22nd. I payed for my part May 4th, no part in the mail and no way to get a hold of him.

Let me check into where your shipment is. I apologize for any delay. I make sure every customer I have is completely satisfied. No worries.
 
Last edited:
Hey, I still don't have anything, regarding a tracking number, the AWR mount I payed for, or a refund in full. You promised me a tracking number 2 weeks ago, but you've only pm'ed me about 3 times telling me how you'll give me that number in a future pm. What can we do?
 
Hey, I still don't have anything, regarding a tracking number, the AWR mount I payed for, or a refund in full. You promised me a tracking number 2 weeks ago, but you've only pm'ed me about 3 times telling me how you'll give me that number in a future pm. What can we do?

Check your PMs. The package was returned to the post office, I sent it back out today. Hopefully, we don't run into anymore problems.
 
Few questions for you: 1. Would you sell just the rear lip off of the bumper 2. What would you consider fair for the cylinder head

Thanks
 
Pm re: valve cover

Replied.

Do you still have the oil pan?

Yes, I do. Still on the block currently, though. But I will sell it.

Would you send me the pistons with rods besides some smaller parts over to Germany with USPS?

Yeah, sure. Just cover shipping costs and I don't care. Shipping will be pretty expensive, though. I don't know exactly how expensive however, since I've never shipped to Europe before.
 
How much? Shipping to 72903?

In good faith, I can't take money for it while it's still on the motor. I am crazy busy right now, and for the rest of the summer, so I'll have to see when I get time to tear down the motor and get the oil pan off. I'll PM you for further info.
 
Yeah, sure. Just cover shipping costs and I don't care. Shipping will be pretty expensive, though. I don't know exactly how expensive however, since I've never shipped to Europe before.
Sorry for my delayed answer. No pistons anymore for me, I assumed that they were higher comp against my FS01. I would need off the block: knock sensor, EGR valve, cam sensor, one of the aftermarket oil caps
 
Sorry for my delayed answer. No pistons anymore for me, I assumed that they were higher comp against my FS01. I would need off the block: knock sensor, EGR valve, cam sensor, one of the aftermarket oil caps

I have the cam sensor and knock sensor. Nothing else mentioned, though.
 
Has anyone received parts from this guy recently? I paid for both intake and exhaust cams and cam gears almost 4 weeks ago with no product in hand.
 
Back