While I had the MZ5 on the jack stands. I've noticed the heat shields on the fire wall and above exhaust system are coming apart.
It looks like just a thin piece of aluminum foil on fiberglass foam with cardboard backing. The foil either detach from the fiberglass or flaking (in contact with moving part or air drag).
I am thinking of peeling off the foils and re-glue it with heavy duty radiant barrier foil (Class A/1 fire rating) instead of replace the whole thing.
It looks like just a thin piece of aluminum foil on fiberglass foam with cardboard backing. The foil either detach from the fiberglass or flaking (in contact with moving part or air drag).
I am thinking of peeling off the foils and re-glue it with heavy duty radiant barrier foil (Class A/1 fire rating) instead of replace the whole thing.
