Mazda of the Month - ENTER NOW for October!

Status
Not open for further replies.

Antoine

Administrator
Welcome to the Official Mazdas247.com "Mazda of the Month" Contest!

* The MOTM is OPEN to ALL Mazdas! *

Please note the following rules & guidelines.
Your cooperation and participation would be greatly appreciated, thank you.


ENTRY RULES

1. ANY form of cheating will result in immediate disqualification and removal from the contest.
2. You must own the Mazda you are entering into the contest.
3. Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc.
4. If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered.
5. If you become a MOTM winner, you may not enter the same Mazda again until at least 12 Months after the month you had won. However, if you own several Mazdas, you are welcome to enter those as well.
Note #1: Each Member may NOT enter more than one Mazda per MOTM contest.
Note #2: Previous MOTM winners who wish to enter again (after 12 months) must enter with all new photos of their winning Mazda.
6. Once you have entered (posted) your Mazda, you may not withdraw from the contest.
7. The MOTM contest & rules are subject to change in order to maintain a fair & fun environment for the Mazdas247.com community.

Contest Requirements:
* Each contestant must submit three single high-quality high-resolution images of their Mazda. One image must be of the exterior, another the engine bay and finally an interior shot. Compilation style shots (multiple images within a single image or picture size frame) are NOT ALLOWED!!!
* Each contestant must follow the format shown below or your entry will not count!!!
* Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc.

FORMAT:
1. Username
2. Name
3. Model name + (Year)
4. ONLY 3 Images (one exterior + one engine bay + one interior shot) NO ATTACHMENTS PLEASE!
5. "Mod" List *NOTE* It must be posted in default "Verdana" text size 2. No colors and No funky formatting!Please make your list CLEAR & CONCISE!

WAIT! Before you take & post pics...Is your Mazda?
* Washed & Waxed?
* Engine bay clean?
* Interior clean?

Now that your ready to take pics...Is your Mazda?
* In a well lit place?
* In front of a sweet background?
* Engine bay well lit?
* Interior detail visible?

Finally...Is your Mazda MOTM Entry?
* CREATIVE?!?! *

Example (Obviously, this is NOT my ride but for the sake of an interesting example ;) ):

Antoine
Antoine
Mazda 767B (1989)
booya.jpg


the%20bay%20shot.jpg


int%20shot.jpg


Performance Mods:
Top Secret

Engine Appearance Mods:
Top Secret

Exterior Mods:
Top Secret

Interior Mods:
Top Secret

Stereo Mods:
lol...Stereo

Awards Won:
Beyond awards...

Recognition:
Raced at Le Mans...Helped lay the groundwork for the 787B which won Le Mans in 1991.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Now on to the fun part...PRIZES! Check out what you could WIN! (first)

  • A Mazdas247 T-Shirt and a pair of Mazdas247 Decals!

  • Your Mazda showcased on the Mazdas247 Home Page!

  • 5% off any Speedcircuit.net purchase made that month!

GOOD LUCK to all who enter! (thumb)


VOTING RULES

1.
All voters must have a postcount minimum of a 100 posts and have been a Mazdas247.com Member for at least 1 month. The only exception to this rule is for Contestants who are also new members.

2. There is NO tolerance for PERSONAL CAMPAIGNING threads, posts, private messages (PMs), images or links (including signature and or image links). The creation of such ANYWHERE on or off the Internet including Mazdas247.com will result in that car's immediate disqualification. *If you are disqualified, your entry & poll listing WILL remain but your votes will be removed. Everyone will see that you broke the MOTM rules.

3. Creating general "Vote for the MOTM" threads and links are not only allowed, it's encouraged!​
 
.
Please note the following rules!

  • If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered (the same applies for MOTM winners who wish to re-enter).

  • Previous MOTM winners who wish to enter again (after 12 months) must enter with all new photos of their winning Mazda.


DEADLINE to ENTER is October 26th 2011!

PRIZE UPDATE!

From now on, MOTM winners will receive...

A Mazdas247 T-Shirt and a pair of Mazdas247 Decals
 
.
REMEMBER:
No Complaining, No "Soapboxing" and No Trolling
in MOTM threads or your post/s will be removed and you will receive an infraction.

Everyone's understanding and cooperation would be greatly appreciated, thank you and good luck!
 
CityRacer
Christopher
1993 Ford Probe~Mazda 2.0fs+g series trans+suspension+etc

NAL073.jpg


025-1.jpg


garageshoot019.jpg


Engine+trans:
Mazda~2.0 FSDE
Wiseco 8.7:1
K1~connecting rods
clevite~bearings
Arp main studs
cometic extra thick head gasket
oil pump relief valve shimmed 6mm
oil pan tapped for turbo return line
Blocked bored to 84mm
rotating assembly balanced and blueprinted
Arp head studs
CorkSport stainless steel valves
Eibach valve springs
Mazda~solid lifter conversion
heavy port and polished head
adjustable cam gears (both intake+exhaust)
fsze intake cam
fsde exhaust cam
obx turbo manifold
arp stainless steel exhaust studs
Precision Turbo~GT30R: .48ar~t+.60ar~c
Tial 38mm wastegate~15lb spring
stainless steel dump and wastegate tubes + vband connection to exhaust
Aluminum intercooler piping + 28x12x3 front mount intercooler
Synapse Synchronic Blow Off Valve~recirculated
Gizmo Electric Boost Controller~tuned up to 28psi+scramble boost mode
Aluminum turbo inlet + wire mesh intake filter
EGR + IAC removed with metal plates installed now
cold idle solenoid + wire mesh intake (closes at 99 degrees water temp~good for about 400rpms)
billet check valve for cold idle solenoid
Aluminum pulley =water+power steering
Protege power steering pump conversion
140amp High output alternator + custom overdrive pulley
unorthodox racing aluminum under drive pulley plus crank sensor magnets
custom crank sensor bracket
twin catch can system vented into the drivers wheel well
WeaponR~engine torque damper: bolted to lower trans and center cross member
AWR rear, pass side, and front engine mounts
rebuilt and braced passenger engine mount to body area (tore the mount from the body, had to get it rebuilt stronger)
Twin walbro pumps = 190 in tank+255 in line
Aeromotive rising rate fuel pressure regulator
RCE 650cc injectors
shureflo 150 pump into m4 nozzle (water injection)
NGK spark plugs
NGK Spark plug wires
MSD high vibration ignition coil
MSD high vibration ignition box
polished caps ~ coolant/washer/brake/power steering
polished fuse box lid cover
RonDavis aluminum radiator + 18psi cap / 180o thermostat
polished aluminum radiator cover plate
stainless steel radiator lines
Accusump 1qt + manual valve + in line check valve
oil cooler + thermostatic bypass + sandwich plate + remote ZR1 oil filter+ filter magnet (half moon style)
aluminum heat shielding on anything non metal around the turbo/manifold
mild steel exhaust + resonator + oval straight through glass packed muffler + rusty tip (trying to be somewhat incognito)
corksport ~ eurathane exhaust hangers
RR-Racing short shifter + poly linkage bushings
Spec 4+ clutch (non sprung full faced disc)
Spec aluminum flywheel
Quaife Limited Slip Differential
PAR straight cut 3rd gear
PAR billet trans case bearing cups
stainless steel clutch line
Noe trans fluid
WS2 (tungsten disulfied) added every oil change

Suspension+Brakes:
Tein SS coilovers with front camber plates
corksport front control arm bushings
AWR front adjustable sway bar attachments
King6Fab custom front cradle with integrated control arm support brackets
Addco rear sway bar
King6Fab rear sway bar attachments for Megan Racing lateral arms
Megan racing rear adjustable lateral arms
Megan racing front strut bar
GT-Spec aluminum trailing arms
GT-Spec Aluminum v-brace
GT-Spec rear sub frame center brace
Aluminum brake booster vacuum canister + check valve
k-sport 8-piston front brakes with 13" floating rotors + race pads
6" front brake ducts
MazdaSpeed Protege rear brakes + EBC Yellow brake pads
k-sport hydraulic hand brake
stainless steel brake lines all four corners
ARP wheel studs
redesigned & replaced rear brake hard lines
welded 1"x2" unibody bracing
welded 1"x2" rear strut housing brace

Exterior:
Aerogear ~ Evo front bumper (modified+molded in turn signals)
Aerogear ~ millenium rear bumper (molded)
Aerogear ~ shogun side skirts (molded)
aluminum tail light center filler (molded)
custom painted tail lights
CarbonFiber ~ head light covers (1 of 15 made)
CarbonFiber ~ rear hatch (1 of 15 made)
CarbonFiber ~ rear spoiler (1 of a kind)
CarbonFiber ~ front hood ("Chris's Toy"stenciled under side of hood)
CarbonFiber ~ engine cover
CarbonFiber ~ front bumper filler
12v Shark fin antenna
gas hood props
raised hood spacers
stainless hood pins
BMW windshield sprayer pump
windshield spray nozzles relocated to wiper arms
wiper arm pressure spring braces
clear side markers
led bulbs ~ corner, side markers, and tail lights
6" rally driving lights + rock guards + dark tint films
quad H3 projector HID lights+relays+capacitors
front diffuser back to wheel wells + 3 frame mounts (also serves as an impact guard for the front bumper-very strong)
rear diffuser from wheel wells to rear bumper edge + 3 frame mounts &2 bumper mounts
front 3/4" wheel spacers with the adapter studs
Kosei K1TS graphite 14lb 17" wheels
Dunlop ~ StarSpecs & WinterSport 3ds
Led rear license plate back up light (super brite leds)
black front emblem change
limo tinted back + quarter windows
front removable tow hook bolted to drivers frame rail

interior:
black conversion from blue=carpet+panels+dash+head liner+custom rear compartment
Ultra suede over thick foam rear compartment ( all the way to the trunk)
roll bar & strut brace foam padding + black fabric wrap
AutoPower Race rollbar
RCI 5-point passenger harness
TeamTech 8-point (custom) driver~jet pilot harness + integrated lumbar & energy dispensation padding
matte black dash cover (to kill reflection from the dash)
Sparco Road Line pedals (positioned for heal toe)
TenzoR ~ Rally seats
TenzoR ~ Steering wheel
Sparco ~ Steering wheel adapter
PorsheRacing ~ steering quick release
1" aluminum steering wheel spacers (2= 5" total closer to driver for modified drivers positioning)
horn relocated to steering column + aftermarket button
TWM ~ shift nob
Leather shift lever boot
Center console delete
fuel mixture "on the fly" adjustment nob mounted into custom lower center dash panel
kill switches ~ ecu/fan/water injection/master power
led indicator lights ~ accuvolt/water injection/ecu fault/knock system
gauges ~ ammeter/water temp/oil pressure/fuel pressure/wide band o2/fuel level/system voltage/vacuum boost/egts
Sony xplode head unit
Focal front speakers
Infiniti rear speakers
JBL w3v3 sub+box (under 15lbs & easily removable for track days)
RockfordFosgate punch amp
kinetik hc1800 battery
battery to trunk relocation + zero gauge wire & 300amp fuse
full vehicle rewire from bumper to bumper
Jacobs electronics Accuvolt
aluminum+carbonfiber shield for Accuvolt
J&S safeguard + launch control/flat foot shifting/knock&a/f gauge
Cooling mist vericool water injection controller
SDS EM4E fuel and ignition system
Trackmate GPS dataloger system
ChaseCam video system
i-shift programmable led shift lights
fire extinguisher + roll bar quick release mounts
Midland (car to pit) 2 way radio system
2 additional 12v outlets

Accomplishments?
Simply that I still have her. Been in a wheelchair for a year now, and others have had to drive my car for me. She's still mine though, and I keep her in good shape. A dyno vid to show she is real. dyno
And a friend of mine on a track last summer.lapping day
*I'm the only one I know of who has shattered a Pauter rod. lol
 
Last edited:
TFMMC
Juan

1979 Mazda RX-7 GS
LoweredSA4.jpg


_MG_6379.jpg


_MG_6778.jpg


Engine:
-Electronic ignition ('80+)
-NGK plugs and wires
-Header (unknown brand)
-Custom "chopped" air cleaner
-Custom exhaust w/ Magnaflow dual tip muffler

Exterior:
-Restored and painted Almex "keyhole" wheels
-Eibach Pro Kit springs
-KYB shocks
-Side molding shaved

Interior:
-'84 seats and hidden storage bins
-Custom headliner
-Dual 7” flip out touch screen DVD
-Visonik mono amp
-10" Kicker Comp in custom box
-Pioneer TS-G1343R 5"
-Kicker 11KS35 3.5"
-Kicker DS65 6.5"
-Miata(NA) shift knob and cup holder
 
Last edited:
Hung Tran
Funkalicious21
2002 MP5-T

3rdAnnualPleasantonCarMeet2011.jpg

enginebaypleasantonshow.jpg

IMG_2705.jpg


Engine Mods: (2.0L Msp Motor Swap 87k)
-12” Slim Fans (2)
-440cc WRX Fuel Injectors
-505 Intake Manifold
-Aeromotive FPR
-ARP Exhaust Studs
-ATX to MTX Engine Harness Swap
-ATP Wastegate
-ATP Turbo Coolant Stainless Steel Lines w/ 10-An Fittings
-AWR Front Motor Mount inserts
-AWR Passenger Side Motor Mount inserts
-AWR Rear Motor Mount inserts
-Forge BOV
-Garret GT2860RS-Disco Potatoe
-Injen CAI
-MAM Straight Water Neck
-MAM Turbo Manifold
-Mazdaspeed Protg Oil Cooler
-Mishimoto Aluminum Radiator
-NGK Spark Plugs Wires
-Optima Redtop 35 Battery
-Outlawed Engineering Intake Spacers
-Perrin Fuel Rail
-Pope’s 3” Down Pipe
-Stainless Steel Oil Line
-Turbo Life FMIC
-Vibrant Silver Vacuum Block

Fuel Management Mods:
-Mazdaspeed Protg ECU
-Split Second Fuel Time Controller

Transmission/Drive train/Shifter Mods: (ATX to MTX Swap)
-Mazdaspeed Protg LSD transmission Swap
-Mazdaspeed Protg Flywheel
-Mazdaspeed Protg Axles
-Mazdaspeed Protg Manual Shift Linkage Swap
-Mazdaspeed Protg Light Weight Flywheel
-TWM Short Shifter
-TWM Shift Link Bushings

Exhaust Mods:
-3" Pope Down Pipe
-Calleyway J Pipe
-Calleyway S Pipe
-Corksport Hangers
-Thermal R&D 3” Exhaust Cat-Back

Brake Mods:
-ABS Added System, MSP Front And Rear Knuckle and sensor added
-Drilled/Slotted Rotors Front
-Drilled/Slotted Rear Rotors
-Front M6 06-07 big brakes
-Mazdaspeed Protg Rear Brake
-SS Brake Lines



Suspension/Handling Mods:
-AAC Rear Link Kit
-AIX Clunk Fix Kit
-AWR Rear MSP Endlinks
-BC Racing Coilovers (BR Series)
-BC Extended Dampening Cables
-Eibach SPC Camber Bolts
-Ebay Rear Sway Bar for MX-6
-KMR Front Tie Bar
-KMR 4 Point Ladder Brace
-KMR Rear V Brace
-Racing Beat 20mm Rear Sway
-Racing Beat Front 24mm sway

Tires/Rim Mods:
-Blox Extended Lugs
-Blox Extended Studs
-BBS RS 17x9 -13 (Front)
-BBS RS 17x11 +12 (rear)
-Falken 502 205/40/17 (2 Inch Stretch)
-H&R 25mm Spacers Rear
-Hub Centric Rings
-Nankang NS-1 195/40/17
-Rs5 Tenzo 17x7 +42
-Tuner Lungs
-XXR 962 17x9 +35 front
-XXR 962 17x9 +10 Rear

Appearance Mods:
Exterior:
-5% Tint Windows
-AAC Front Bumper Bracket Gap Fix Kit
-Alocade Eyelids
-Custom Retro Fitted Headlights Projectors
-DGM Urethane Front Lip
-ForceFed Single Gauge Steering Column Pod
-Fatlace License Plate Frame
-iSport Carbon Fiber Rear Spoiler Extension Lip
-Latitude Rain-X Wipers
-LED License Plate Light Bulbs
-Mazda6 Rear Wiper Swap
-Shorty Atenna
-Tenon HID Headlight Kit 6K
-Tenon HID Fog Light Kit 3k

Engine:
-Air Diversion Plate
-DGM Engine Cover
-DGM Carbon Fiber Oil Cap Cover
-DGM Carbon Fiber Air Ram Hood
-DGM Valve Cover Brackets
-Engine Semi Wire Tuck
-Engine Dress-up Bolt Kit By HKP05
-ForceFed Wrinkled Black Valve Cover
-Stock Red Strut Bar


Interior:
-Autometer Oil Pressure Guage
-Autometer Boost Guage
-Autometer Wideband
-Carbon Fiber Shift Boot
-Dave-B Cluster Rings
-Dual Pod Gauge Cluster
-HKS Turbo Timer
-Mazdaspeed Protg Shift Knob
-Mazdaspeed Protg Gauge Cluster
-Mazdaspeed Protg Pedals (Clutch, Brakes, and Gas)
-Mazdaspeed Protg Floor Mats
-Mazdaspeed Protg Seats Front/Rear
-Nardi Miata 99-05 Steering Wheel
-Protege5 EL Door Sills
-Protege5 Cargo Net
-Sparco Pedal Covers


Audio/Video:
-Inifnity Basslink Sub/Amp
-Infinity Kappa 6x9 Component Speakers
-Infinity Kappa 6.5 Component Speakers
-Rockford Fosgate P400-4
-Rockford Speaker Cables (sub only)
-Rockford Subwoofer Interconnect RCA

Misc:
-Clarion 2-Way Alarm
-Royal Purple
-MOCC Forum Decal
-Redline MT-90 Manual Transmission Fluid
-Team Pro5 Decal
-Wix Oil Filter

Recognition:
3rd Annual Pleasanton Auto Show Best Mazda 2011
Pleasanton Auto Show 2nd Place Best Team 2009 (MOCC)
3rd Annual Pleasanton Auto Show 1st Place Best Team 2011 (MOCC)
#18 Slammed Member
First Hella-Flushed Protg/Protege5
Team Pro5

Waiting to Install:
-ET Performance Crank Case Vaccum Kit
-K1 Technology Rods
-ACL Thrust Washer
-ACL Main Bearings Set
-ACL Rod Bearings Set

Future Mods:
-ARP Main Studs
-Cosmetic Head Gasket
-Doc B Oil System
-Oil Relocation
-Pope’s Midpipe
-Wiseco Pistons
-Signature Sound Tanks (Coolant, Power Steering, And Oil)
 
Last edited:
Hung don't forget your amazing Best Mazda win at the Pleasanton Auto Show! Also, MOCC got first place team!
 
hey couple quick questions. Is that a different rim in the back of your car pic? I noticed a repeat of the Down Pipe. Do you use both the MSP Bypass valve, and the Forge BOV together? I think there is a rule against using the same pics two months in a row.. May want to grab a different inside pic. Your creation is a very solid competitor. Happy to compete again. :)
 
I believe if I've entered more than two months. So i think im good.

Good catch, it has been edited. Thanks.

Yeah, two different setups.
Front: 17 x 9 +35 XXR 962
Rear: 17 x 9 -13 BBS RS

Thank you. Like wise to you too my friend. Good Luck.
 
Last edited:
Status
Not open for further replies.
Back