Mazdas247.com Mazda of the Month (August)

Antoine

Administrator
.


Congratulations to Herblenny! (first)
VOTE NOW for September!
OPEN TO ALL MAZDAS

280987_2072257558448_1005170936_32419350_7206113_o.jpg


ia_8_web.jpg


Phil
1993 Mazda RX-7 TwinTurbo Touring Edition


Engine:
-Pettit Polished AST
-Koyo N-Flow Radiator
-Custom Carbon Fiber Cooling panel
-Fast acting Airtemp sensor
-Remote Start/pager/alarm/turbo timer
-BNR Stage 3 Twin Turbos
-Ported 13B-REW engine
-Custom Grounding kit
-polished Efini-Y pipe
-Polished upper intake manifold
-Polished 90mm Rotary Works Throttle body
-Polished Greddy elbow w/injector ports
-Apexi GT Spec FMIC
-Custom polished pipings By: BNRSupercars.com
-Constant tension T-blot clamps for IC pipings and Intakes.
-HKS seq. BOV
-HKS twinpower ignition amp
-Tanabe Catback
-SS Pettit DP
-Apexi PowerFC
-Mazdaspeed ignition wires
-FEED oil filler cap
-FEED coolant filler cap
-Added R1 Dual oil coolers
-Braille light battery
-Braille Verticle mounting kit
-FC Datalogit
-Unorthodox Alternator pulley (red)
-Unorthodox Power steering pulley(blue)
-Exedy Hyper Single Clutch Kit
-Simplified seq twin set up
-polished hardline intake pipes for secondary intake.
-Ported JDM Upper Intake manifold and polished by David Garfinkle.
Also all the misc. vacuum ports have been welded shut, cleaned and polished for a cleaner look.
-Pettit Racing water pump pulley
-2 x 4 blade fan set up for better cooling
-HKS RS intake with KN filters
-Tweakit Racing tensioner pulley kit

Suspension:
-M2 launch kit
-FEED coilovers
-Racing Beat sway bar brace
-Racing Beat sway bars (front and rear)
-Custom Garfinkle Motorworks Engine torque brace to clear Tower brace
-FEED front strut tower brace
-RZ larger front and rear brake calipers
-Hawk HP+ pads front and rear
-Newly sandblasted A-arms and other suspension parts
-Custom Garfinkle Motorwork cross drilled RZ rotors
-Braided SS brake lines
-Racing Beat sway bushings
-New Delrin bushings for all suspension parts
-Transmission brace
-Nagisa Shock Tower Brace
-Dragon's diff brace
-WORK XD9 18x10 +38 with 10mm FIC spacers front and 15mm Ichiban spacers rear
-Custom Carbon Fiber centers for the WORK wheels.
-Yokohama Advan Sport 255/35 front 295/30 rear
-Raceshop rollbar with much stronger rear strut tower brace.

Interior & Stereo:
-Converted Black interior - including, door panels, rear panels, head liner, seat belts, and black main carpet
-RZ floormats
-Rare moon roof interior cover
-JDM rear seats with panels, seat belts, and special rear carpet
-added R1 rear speaker pods for 7 speaker system
-Prosport boost, A/F, Fuel, Boost, and Oil temp gauges
-Prosport center speaker pod
-Bride Exas III seats with Bride rails
-Nardi shift knob
-red leather stitching shift and ebrake boots
-LED interior lights
-Rare red stitch Nardi wheels
-Custom install of Protege cruise control to the Nardi wheel
-RE steering column pod with 52mm Prosport boost gauge
-JKL Engineering Carbon Fiber Gauge cluster, hood AC panel, shifter,etc (not overlay)
-JVC 7inch AV system
-New EL PowerFC commander and Gotham Racing PFC Commander holder
-RE-A speedo cluster gauge
-FEED Carbon fiber rear trunk add on.
-Base model hatch cover
-added OEM fog light switch to turn FEED HID driving lights
-Carbon look oem door step

Exterior:
-One off Feed Carbon Gas door (Shine Auto)
-Feed Type 2R front bumper
-Feed Carbon fiber canards
-Feed Carbon Fiber side skirts
-Feed wide front fenders
-FEED rear wide flares
-RE-A Carbon Fiber N1 hood
-Rotary Extreme hood dampers
-R-magic oil cooler ducts
-FEED front tow hook
-RE-Amemiya Carbon rear diffuser
-Carbon Fiber rear hatch with FAL lexan glass
-APR GT 300 Carbon Fiber rear wing
-Custom 1/8 inch mounting kit for GT 300 wing
-Custom LED tail lights
-Custom rear bumper CF signal covers
-FEED head light cover
-rare glass moon roof
-SportTuner HID projector head lights
-LED signal lights in FEED signals
-HID FEED Signal lights
-Spirit R fender badges
-Efini front are rear badges
-Carbon look rear bumper lights
-Carbon fiber FEED gas door (one off made)
-APR Carbon Fiber side Mirrors
-Custom front canard add on
-Carbon Cooling panel (custom, made by me)
-LED Front bumper strips
-FEED signal light covers
-FEED door handles
-Carbon Fiber back of the door handle covers.
-Back Off 3rd light flasher
-ShineAuto rear tail light lip
-Feed carbon Fiber bumper guard by Shine Auto​
 
this has still got to be the most beautiful rx-7 i've ever laid my eyes on. i have an obsession with these, so i see A LOT of them, but this one takes the cake. keep up the amazing work man, your car is drop-dead gorgeous.
 
Back