Mazda of the Month - ENTER NOW for September!

Status
Not open for further replies.

Antoine

Administrator
Welcome to the Official Mazdas247.com "Mazda of the Month" Contest!

* The MOTM is OPEN to ALL Mazdas! *

Please note the following rules & guidelines.
Your cooperation and participation would be greatly appreciated, thank you.


ENTRY RULES

1. ANY form of cheating will result in immediate disqualification and removal from the contest.
2. You must own the Mazda you are entering into the contest.
3. Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc.
4. If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered.
5. If you become a MOTM winner, you may not enter the same Mazda again until at least 12 Months after the month you had won. However, if you own several Mazdas, you are welcome to enter those as well.
Note #1: Each Member may NOT enter more than one Mazda per MOTM contest.
Note #2: Previous MOTM winners who wish to enter again (after 12 months) must enter with all new photos of their winning Mazda.
6. Once you have entered (posted) your Mazda, you may not withdraw from the contest.
7. The MOTM contest & rules are subject to change in order to maintain a fair & fun environment for the Mazdas247.com community.

Contest Requirements:
* Each contestant must submit three single high-quality high-resolution images of their Mazda. One image must be of the exterior, another the engine bay and finally an interior shot. Compilation style shots (multiple images within a single image or picture size frame) are NOT ALLOWED!!!
* Each contestant must follow the format shown below or your entry will not count!!!
* Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc.

FORMAT:
1. Username
2. Name
3. Model name + (Year)
4. ONLY 3 Images (one exterior + one engine bay + one interior shot) NO ATTACHMENTS PLEASE!
5. "Mod" List *NOTE* It must be posted in default "Verdana" text size 2. No colors and No funky formatting!Please make your list CLEAR & CONCISE!

WAIT! Before you take & post pics...Is your Mazda?
* Washed & Waxed?
* Engine bay clean?
* Interior clean?

Now that your ready to take pics...Is your Mazda?
* In a well lit place?
* In front of a sweet background?
* Engine bay well lit?
* Interior detail visible?

Finally...Is your Mazda MOTM Entry?
* CREATIVE?!?! *

Example (Obviously, this is NOT my ride but for the sake of an interesting example ;) ):

Antoine
Antoine
Mazda 767B (1989)
booya.jpg


the%20bay%20shot.jpg


int%20shot.jpg


Performance Mods:
Top Secret

Engine Appearance Mods:
Top Secret

Exterior Mods:
Top Secret

Interior Mods:
Top Secret

Stereo Mods:
lol...Stereo

Awards Won:
Beyond awards...

Recognition:
Raced at Le Mans...Helped lay the groundwork for the 787B which won Le Mans in 1991.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Now on to the fun part...PRIZES! Check out what you could WIN! (first)

  • A Mazdas247 T-Shirt and a pair of Mazdas247 Decals!

  • Your Mazda showcased on the Mazdas247 Home Page!

  • 5% off any Speedcircuit.net purchase made that month!

GOOD LUCK to all who enter! (thumb)


VOTING RULES

1.
All voters must have a postcount minimum of a 100 posts and have been a Mazdas247.com Member for at least 1 month. The only exception to this rule is for Contestants who are also new members.

2. There is NO tolerance for PERSONAL CAMPAIGNING threads, posts, private messages (PMs), images or links (including signature and or image links). The creation of such ANYWHERE on or off the Internet including Mazdas247.com will result in that car's immediate disqualification. *If you are disqualified, your entry & poll listing WILL remain but your votes will be removed. Everyone will see that you broke the MOTM rules.

3. Creating general "Vote for the MOTM" threads and links are not only allowed, it's encouraged!​
 
icon4.gif
NOTE: Please keep this thread ON TOPIC. Thank you and once again, good luck! (first)

Please note the following rules!

  • If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered (the same applies for MOTM winners who wish to re-enter).

  • Previous MOTM winners who wish to enter again (after 12 months) must enter with all new photos of their winning Mazda.


DEADLINE to ENTER is September 26th 2011!


PRIZE UPDATE!

From now on, MOTM winners will receive...

A Mazdas247 T-Shirt and a pair of Mazdas247 Decals
 
1. Outlawstar98
2. Kyle Dampman
3. 2003 Mazdaspeed Protege
4.
rollingshot5.jpg

vallyforge2.jpg

dsc00045t.jpg


5. Preformance Mods -
GT3071R
K1 Long Rods (8.8:1)
Wiseco Pistons (.020 overbore)
Custom Made 3/4" Thermostat Spacer
Custom Made Oil Temp Gauge Connector
Braided Oil Lines
Cometic Multi Layer Steel Head Gasket
ARP Head Studs
ARP Main Studs
ARP Exhaust Mani Studs
ACL Engine Bearing Kit
3 Angle Valve Job (rebuilt head with all OEM Parts)
SteedSpeed Turbo Mani Ceramic Coated
ATP Wastegate Actuator
NGK ZFR7F Spark Plugs
Custom 3" Short Ram Intake with TurboHoses Filter
Perrin Fuel Rail
Updated Welded LSD
Spec Stage 2+ Clutch
Fidanza 7lb Aluminum Flywheel
TurboLife's FMIC
TurboXS RRFL BOV
Medieval Front Motor Mount
Medieval Rear Motor Mount
Medieval Passenger Motor Mount
Medieval Transmission Motor Mount
Medieval Light Weight Powersteering Pulley
Medieval Light Weight Water Pump Pulley
PEP's 3" Downpipe Ceramic Coated
Perrin Catless 3' Exhaust (w/ Vibrant O2 Simulator)


Suspension Mods -
GT Spec Frount Strut
GT Spec Rear Reinforcement Pannel
GT Spec Rear V Brace
GT Spec Four Point Lader Bar
GT Spec Trunk Cage
Fortune Auto Coilovers
Custom Front Endlinks
Custom Rear Endlinks
AAC Adjustable Rear Link Kit
AXR Anti Clunk Fix Brackets
Rotora Slotted Rotors
EBC Greenstuff Brake Pads
Stock Racing Heart Wheels Painted Gold
215/45/17 Bridgestone Potenza RE50A Pole Position Tires
Alignment Specs - 1.7 Degrees in front and 2.2 Degrees of camber in the rear

Interior Mods -
PedoBear Co-Pilot
DGM Carbon Fiber A Pillars w/ Gauge Pod
DGM Carbon Fiber E-Brake Surround
DGM Carbon Fiber Radio Surround
AutoMeter Boost/Vac Gauge
AutoMeter Oil Temperature Sensor
AutoMeter Oil Pressure
AEM Wideband 02
Dave B Rings
2003.5 Gauge Cluster
GloShift 3 Gauge Din
Sony Headunit
Wedge Racing Seat Bracket
Sparco Fighter Racing Seat
APC Carbon Fiber Shift Knob

Exterior Mods -
ProSport Carbon Fiber Hood Dampers
DGM Carbon Fiber Eyelids
DGM Carbon Fiber Mirror Covers
DGM Carbon Fiber Grille
Carbon Fiber Gas Door
Carbon Fiber Pillar Trim
HomeGroundFab Carbon Fiber Devision Plate
XC CF Trunk
XC Carbon Fiber Hood
EDM Tail Lights
HID 6000k Kit
Matt V Projector Retrofit Headlights
2003.5 MSP Lip
JDP Carbon Fiber Spliter
iSport Carbon Fiber Fenders
iSport Rear Diffuser
nk2a Bumper Sag Fix
Engine Dress Up Washers
Muteki SR48 Neo Chrome Lug Nuts

Awards Won -
1. "Lowest Power Output & Good Sport Award; JSC Speed Dyno Contest June 13th 2009"
(PS. that was before the build ;) )
2. "Top 50 award" 3rd annual fall fling car show, September 18, 2011
 
Last edited:
just for fun...

not yellow
zachary
2009 Mazdaspeed3 Grand Touring

6060263957_865d258ede_o.jpg


6145484984_671a94c974_o.jpg


6144933203_0aef91f83a_o.jpg


<style>*<!-- /* Font Definitions */ @font-face {font-family:"Times New Roman"; panose-1:0 2 2 6 3 5 4 5 2 3; mso-font-charset:0; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:50331648 0 0 0 1 0;} @font-face {font-family:Optima; panose-1:0 2 0 5 3 6 0 0 2 0; mso-font-charset:0; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:50331648 0 0 0 1 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:20.0pt; font-family:Optima;} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} --> </style> <style> <!-- /* Font Definitions */ @font-face {font-family:"Times New Roman"; panose-1:0 2 2 6 3 5 4 5 2 3; mso-font-charset:0; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:50331648 0 0 0 1 0;} @font-face {font-family:Optima; panose-1:0 2 0 5 3 6 0 0 2 0; mso-font-charset:0; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:50331648 0 0 0 1 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:20.0pt; font-family:Optima;} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} --> </style> wheels/suspension:
H&R coilovers
painted calipers (black)
hawk HP plus brake pads
progress 32mm rear sway bar
mazdaspeed CF valve caps
hasegawa lug nuts (black)
muteki forged lug nuts (orange)
rolled and trimmed rear fenders
racing sparco NT-R 18x8/18x9 +42/+45 w/ nitto NT0-5 in 235/40
private reserve 18x8 +40 w/ hankook ventus V12 evo K110 in 215/40
mazda RX-8 18x8 +50 custom finished in bronze w/ goodyear eagle GT in 235/40 and 6mm spacers

exterior:
clear rear reflectors
JDM window visors
tinted fog lights 35%
autoexe stubby antenna
plasti-dip front emblem (white)
personalized plates CWP MS3
whited out rear turn signal bulbs
chrome front turn signal bulbs
window tint 20% rear, 35% front
pink barbie hair brush drift charm
front lip splitters with JDM ziptie whiskers
deleted rear wiper, door moldings, rear emblems, license plate lights

under/inside:
304g test pipe
TWM short shifter
custom trunk liner
hydraulic hood props
cobb turbo inlet pipe
cobb short ram intake
aluminum shifter bushings
SU aluminum oil filler cap
TWM A6 leopard shifter knob
custom urban camo shift boot
CPE 75 duro rear motor mount
all interior lights swapped for LEDs

accolades:
your mom likes the back seat.
the neighborhood kids think its neat.
tracked regularly.
 
CityRacer
Christopher
1993 Ford Probe~Mazda~2.0 fsde engine + g series trans + suspension + brakes

garageshoot007.jpg


026-1.jpg


003-10.jpg


Engine+trans:
Mazda~2.0 FSDE
Wiseco 8.7:1
K1~connecting rods
clevite~bearings
Arp main studs
cometic extra thick head gasket
oil pump relief valve shimmed 6mm
oil pan tapped for turbo return line
Blocked bored to 84mm
rotating assembly balanced and blueprinted
Arp head studs
CorkSport stainless steel valves
Eibach valve springs
Mazda~solid lifter conversion
heavy port and polished head
adjustable cam gears (both intake+exhaust)
fsze intake cam
fsde exhaust cam
obx turbo manifold
arp stainless steel exhaust studs
Precision Turbo~GT30R: .48ar~t+.60ar~c
Tial 38mm wastegate~15lb spring
stainless steel dump and wastegate tubes + vband connection to exhaust
Aluminum intercooler piping + 28x12x3 front mount intercooler
Synapse Synchronic Blow Off Valve~recirculated
Gizmo Electric Boost Controller~tuned up to 28psi+scramble boost mode
Aluminum turbo inlet + wire mesh intake filter
EGR + IAC removed with metal plates installed now
cold idle solenoid + wire mesh intake (closes at 99 degrees water temp~good for about 400rpms)
billet check valve for cold idle solenoid
Aluminum pulley =water+power steering
Protege power steering pump conversion
140amp High output alternator + custom overdrive pulley
unorthodox racing aluminum under drive pulley plus crank sensor magnets
custom crank sensor bracket
twin catch can system vented into the drivers wheel well
WeaponR~engine torque damper: bolted to lower trans and center cross member
AWR rear, pass side, and front engine mounts
rebuilt and braced passenger engine mount to body area (tore the mount from the body, had to get it rebuilt stronger)
Twin walbro pumps = 190 in tank+255 in line
Aeromotive rising rate fuel pressure regulator
RCE 650cc injectors
shureflo 150 pump into m4 nozzle (water injection)
NGK spark plugs
NGK Spark plug wires
MSD high vibration ignition coil
MSD high vibration ignition box
polished caps ~ coolant/washer/brake/power steering
polished fuse box lid cover
RonDavis aluminum radiator + 18psi cap / 180o thermostat
polished aluminum radiator cover plate
stainless steel radiator lines
Accusump 1qt + manual valve + in line check valve
oil cooler + thermostatic bypass + sandwich plate + remote ZR1 oil filter+ filter magnet (half moon style)
aluminum heat shielding on anything non metal around the turbo/manifold
mild steel exhaust + resonator + oval straight through glass packed muffler + rusty tip (trying to be somewhat incognito)
corksport ~ eurathane exhaust hangers
RR-Racing short shifter + poly linkage bushings
Spec 4+ clutch (non sprung full faced disc)
Spec aluminum flywheel
Quaife Limited Slip Differential
PAR straight cut 3rd gear
PAR billet trans case bearing cups
stainless steel clutch line
Noe trans fluid
WS2 (tungsten disulfied) added every oil change

Suspension+Brakes:
Tein SS coilovers with front camber plates
corksport front control arm bushings
AWR front adjustable sway bar attachments
King6Fab custom front cradle with integrated control arm support brackets
Addco rear sway bar
King6Fab rear sway bar attachments for Megan Racing lateral arms
Megan racing rear adjustable lateral arms
Megan racing front strut bar
GT-Spec aluminum trailing arms
GT-Spec Aluminum v-brace
GT-Spec rear sub frame center brace
Aluminum brake booster vacuum canister + check valve
k-sport 8-piston front brakes with 13" floating rotors + race pads
6" front brake ducts
MazdaSpeed Protege rear brakes + EBC Yellow brake pads
k-sport hydraulic hand brake
stainless steel brake lines all four corners
ARP wheel studs
redesigned & replaced rear brake hard lines
welded 1"x2" unibody bracing
welded 1"x2" rear strut housing brace

Exterior:
Aerogear ~ Evo front bumper (modified+molded in turn signals)
Aerogear ~ millenium rear bumper (molded)
Aerogear ~ shogun side skirts (molded)
aluminum tail light center filler (molded)
custom painted tail lights
CarbonFiber ~ head light covers (1 of 15 made)
CarbonFiber ~ rear hatch (1 of 15 made)
CarbonFiber ~ rear spoiler (1 of a kind)
CarbonFiber ~ front hood ("Chris's Toy"stenciled under side of hood)
CarbonFiber ~ engine cover
CarbonFiber ~ front bumper filler
12v Shark fin antenna
gas hood props
raised hood spacers
stainless hood pins
BMW windshield sprayer pump
windshield spray nozzles relocated to wiper arms
wiper arm pressure spring braces
clear side markers
led bulbs ~ corner, side markers, and tail lights
6" rally driving lights + rock guards + dark tint films
quad H3 projector HID lights+relays+capacitors
front diffuser back to wheel wells + 3 frame mounts (also serves as an impact guard for the front bumper-very strong)
rear diffuser from wheel wells to rear bumper edge + 3 frame mounts &2 bumper mounts
front 3/4" wheel spacers with the adapter studs
Kosei K1TS graphite 14lb 17" wheels
Dunlop ~ StarSpecs & WinterSport 3ds
Led rear license plate back up light (super brite leds)
black front emblem change
limo tinted back + quarter windows
front removable tow hook bolted to drivers frame rail

interior:
black conversion from blue=carpet+panels+dash+head liner+custom rear compartment
Ultra suede over thick foam rear compartment ( all the way to the trunk)
roll bar & strut brace foam padding + black fabric wrap
AutoPower Race rollbar
RCI 5-point passenger harness
TeamTech 8-point (custom) driver~jet pilot harness + integrated lumbar & energy dispensation padding
matte black dash cover (to kill reflection from the dash)
Sparco Road Line pedals (positioned for heal toe)
TenzoR ~ Rally seats
TenzoR ~ Steering wheel
Sparco ~ Steering wheel adapter
PorsheRacing ~ steering quick release
1" aluminum steering wheel spacers (2= 5" total closer to driver for modified drivers positioning)
horn relocated to steering column + aftermarket button
TWM ~ shift nob
Leather shift lever boot
Center console delete
fuel mixture "on the fly" adjustment nob mounted into custom lower center dash panel
kill switches ~ ecu/fan/water injection/master power
led indicator lights ~ accuvolt/water injection/ecu fault/knock system
gauges ~ ammeter/water temp/oil pressure/fuel pressure/wide band o2/fuel level/system voltage/vacuum boost/egts
Sony xplode head unit
Focal front speakers
Infiniti rear speakers
JBL w3v3 sub+box (under 15lbs & easily removable for track days)
RockfordFosgate punch amp
kinetik hc1800 battery
battery to trunk relocation + zero gauge wire & 300amp fuse
full vehicle rewire from bumper to bumper
Jacobs electronics Accuvolt
aluminum+carbonfiber shield for Accuvolt
J&S safeguard + launch control/flat foot shifting/knock&a/f gauge
Cooling mist vericool water injection controller
SDS EM4E fuel and ignition system
Trackmate GPS dataloger system
ChaseCam video system
i-shift programmable led shift lights
fire extinguisher + roll bar quick release mounts
Midland (car to pit) 2 way radio system
2 additional 12v outlets

Accomplishments?
Simply that I still have her. Been in a wheelchair for a year now, and others have had to drive my car for me. She's still mine though, and I keep her in good shape. A dyno vid to show she is real. dyno
And a friend of mine on a track last summer.lapping day
*I'm the only one I know of who has shattered a Pauter rod. lol
 
Last edited:
RichB
Rich
2007 Mazdaspeed 3 Grand Touring

IMG_0852-1.jpg


IMG_0950.jpg


IMG_0935.jpg


Engine
CP-E Cold Air Intake (Painted Black)
CP-E Top Mount Intercooler
Turbosmart Dual Port Blow-Off Valve (SU Black/Red Edition)
Corksport Power Series 80mm Catback Exhaust
COBB Accessport
Corksport Rear Engine Mount Inserts
Mobil 1 0W-30

Transmission
TWM Performance Short Shifter
TWM Performance Shifter Bushings
COBB Shifter Weight
Redline MT-90

Wheels / Tires / Suspension
(Winter) Stock Mazdaspeed 3 18 X 7 .5 Rims wrapped in 215/45 R18 GoodYear Eagle GT All Season Tires
(Summer) Mazda RX-8 18 X 8 Rims Powder Coated Bronze wrapped in 235/40 R18 Hankook V12 Summer Tires
Mazda Center Caps Painted Black (For RX-8 Wheels)
Black Muteki Lugs (For RX-8 Wheels)
KW Variant 1 Coilovers
Hotchkis Rear Sway Bar
Brake Calipers Painted Red

Interior
OEM Mazda Navigation System
Single Gauge Ventpod
Aero Force Scan Gauge
TWM Performance Matte Black Type R Shift Knob with Etched 6 Gear Pattern that is Painted Red
TWM Performance Shift Boot

Exterior
RHO Front Tow Plate Holder
Windows Tinted to 20%
Debadged "Mazdaspeed 3" From Rear Hatch
Rear Fenders Rolled
 
Last edited:
you guys up for a little fun while this waits out? :)

I only have one sticker on my entire car. You can see it in my interior picture on the windshield corner. I will put my vote in for the first fellow contestant who guesses what it is, or where it's from.

Just for a little fun. :)
 
you guys up for a little fun while this waits out? :)

I only have one sticker on my entire car. You can see it in my interior picture on the windshield corner. I will put my vote in for the first fellow contestant who guesses what it is, or where it's from.

Just for a little fun. :)
Reminds me of the Planet Fitness thing. hahaha
 
nice roller outlaw. looking forward to the other pics. im going to assume you got the aac (not acc ;)) links installed?
 
nice roller outlaw. looking forward to the other pics. im going to assume you got the aac (not acc ;)) links installed?

Haha yeaaa I have to edit that list and add a award. Car show today got a award for the top 50. Only import to win it haha. It's rough in a game of classic cars.
 
you guys up for a little fun while this waits out? :)

I only have one sticker on my entire car. You can see it in my interior picture on the windshield corner. I will put my vote in for the first fellow contestant who guesses what it is, or where it's from.

Just for a little fun. :)

its hitchhikers guide to the galaxy but im not running lol
 
nice! You are correct sir. Hardly any one else has any idea when they see it. lol

Well I honestly haven't fared well when I've run for MOTM before. Still every few months I try again. It's 14 years of my life, and a personal engineering war against physics. I'm proud of my Mazda blood lines in my car. So I try to share that here.

Good luck to all in this months contest. :)
 
Went and took a quick pic of the inside of my car. My substitution is all done now. I need a new wheel D: But I have larger pictures of all of them if anyone wants.
 
Might be a bit premature to enter since I'm on the brink of heavily modifying the Speed, but what the hell. :p

1. JDM-P5
2. Phil B.
3. 2006 White Water Pearl Mazdaspeed6 GT

speedside.jpg

317699_250334725002272_100000772393179_603775_2015496970_n.jpg

34276_130735280295551_100000772393179_135281_5564307_n.jpg


Engine
Option Racing Short Ram Intake
Protege Garage Turbo Inlet Pipe
CP-E Single Exit Cat-back Exhaust
HKS SSQV BOV

Exterior
Auto Exe front grill
Prolight CF Mirrors
Xentec HID Headlight Bulbs
Xentec HID Foglight Conversion Kit

Wheels/Suspension
Rays Gram Lights 57 Pro
BC Racing BR Coilovers

Awards
2nd Place Import Stock (Joint Base Andrews Car Show 2010)
1st Place Import Modified (Joint Base Andrews Car Show 2011)
 
Might as well give it another shot!

Adam
2003 Protege LX


Adam's Protege by Henderson Nguyen, on Flickr

IMG_44341.jpg


IMG_44321.jpg



Suspension Mods:

-"Custom" Fortune Auto 500 Series Coilovers 6k/8k front/rear
-Racingbeat rear sway bar
-Rear strut brace
-Full set of AAC End Links
-5-lug, 4 corner disc brake swap
-AAC Adjustable rear link kit
-US Brake DOT4 600+ fluid

Wheels, Tires and Brakes:
-MB Weapons
Front:
-17x9 +27
-~1.5 degrees of camber
-rolled fenders
-minimal rubbing, except when turning
Rear:
-17x9 +27
-~2.5 degrees of camber
-rolled and pulled fenders
-rubs a lot​
- 205/40 R17 Front/ 215/40 Rear
-Muteki lug nuts
-R1 Concepts slotted rotors
-Hawk pads
-Corksport SS lines

Exterior:
-Protege sedan front lip
-Custom full splitter
-Rain visors
-Bumper latches
-Cut out front grill
-6k HID Headlights
-All red tails
-Completely debadged
-Hella Horns
-Camo vinyl fender
-GT-300 Fiberglass Rear Diffuser
-Sheet Aluminium Rear Spoiler

Engine:
-Exedy Stage 1 Clutch
-RAI
-AC delete
-2 1/4" Cat-back exhaust with bozo style tip

Interior:
-MSP STS
-CorkSport shifter bushings
-Megan STS
-Custom shift extension
-NissanParts shift knob
-Speedway Motors 13" Karting Wheel
-5 panal mirror
-NRG bucket seats
-Harness bar
-Orange RJS Racing 5-point harness


B] Accomplishments/Feature's:[/B]:
MazdaFitment: "Mini Mazda Invasion!" http://mazdafitment.com/2011/04/09/mini-mazda-invasion/
NW-Built: "Mini Mazda Invasion!" http://nw-built.com/?p=1054
NW-Built: "Adam's Protege Update" - http://nw-built.com/?p=1038
NW-Built: "Random Roller: Adam's Protege" - http://nw-built.com/?p=964
Rustyairland: "one of my fav Proteg out there!" - http://rustyairland.wordpress.com/2011/03/17/one-of-my-fav-protege-out-there/
Almost Evil: Hes special - http://almost/evilcrew.com/?p=486
NW-Built: "Ever See a Protege Like This?!" - http://nw-built.com/?p=102
 
Status
Not open for further replies.
Back