Im looking to try and put cruise control back into my car. I threw out both units from my old protege and this one a while ago, thinking I will never need these. Anyways I need the Unit under the hood, with cable intact(not cut at all), brackets to mount it, and also I need the CC switch from any sedan or p5 01-03 with the 3 Post Steering Wheel like in the ES or P5, with wires in tact, horn wire can be cut, but at least enough to strip and solder. Also if you have the plug with pigtail for the unit too that would be helpful. Not looking to spend a fortune, maybe shippng, plus a bit for your time on each part, so dont respond saying $100 for them.