CP-E Cold Air Intake (not the nano) with Amsoil filter

Sorry about the date on the picture...I had taken this picture for a member who was looking for an intake, but he has not paid for it yet, and I'm tired of waiting.

$125 shipped anywhere in the lower 48. Filter has about 5k miles on it.

Full disclosure, the rubber vibration mount broke when I took the intake off the car. I purchased another one from McMaster-Carr, but it is not the exact piece that you get from CP-E. It is the same bolt size, but the rubber piece is a little smaller in OD and a little stiffer durometer. I also bought another bolt and some washers...not sure if the bolt length is correct. If not, a new set of 5 bolts can be purchased from any Lowes or other hardware store for like $1.



This intake sells for $330 new, and does have the air straightener piece inside. The stock MAF sensor screws/bolts/whatever will be needed to install the MAF sensor.

Bump...still for sale.

If this was the back one I'd be all over it!

For 5 bucks and a couple pieces of sandpaper, you can spray it black.

It won't look as nice :-/

If you take your time, it will.

Hmm...... Are there any dents from the shifter weight?