Herblenny
Philip S.
FD RX-7 (1993)
Engine:
-Petite Polished AST
-Mazdaspeed Radiator
-Custom Carbon Fiber Cooling panel
-Fast acting Airtemp sensor
-Remote Start/pager/alarm/turbo timer
-BNR Stage 3 Twin Turbos
-Ported 13B-REW engine
-Custom Grounding kit
-polished Efini-Y pipe
-Polished upper intake manifold
-Polished 90mm Rotary Works Throttle body
-Polished Greddy elbow w/injector ports
-Polished Greddy Stock mount intercooler (going with Apexi FMIC)
-Greddy intercooler piping kit
-Constant tension T-blot clamps for IC pipings and Intakes.
-Blitz seq. BOV
-HKS twinpower ignition amp
-Tanabe Catback
-SS Petit DP
-Apexi PowerFC
-Racing beat ignition wires
-FEED oil filler cap
-FEED coolant filler cap
-Added R1 Dual oil coolers
-Optima Red top battery
-Monster positive battery connector
-FC Datalogit
-Unorthodox Alternator pulley (red)
-Unorthodox Power steering pulley(blue)
-Exedy Hyper Single Clutch Kit
-Simplified seq twin set up
-polished hardline intake pipes for secondary intake.
-Ported JDM Upper Intake manifold and polished by David Garfinkle. Also all the misc. vacuum ports have been welded shut and clean up and polished for cleaner look.
Suspension:
-M2 launch kit
-Coilovers
-Racing Beat sway bar brace
-Racing Beat sway bars (front and rear)
-Garfinkle Motorworks Engine torque brace
-FEED front strut tower brace
-RZ larger front and rear brake calipers
-Hawk HP+ pads front and rear
-Newly sandblasted A-arms and other suspension parts
-Custom Garfinkle Motorwork cross drilled RZ rotors
-Braided SS brake lines
-Racing Beat sway bushings
-New Delrin bushings for all suspension parts
-Transmission brace
-Dragon's diff brace
-WORK XD9 18x10 +38 with 15mm spacer front and 20mm spacer rear
-Michelin PS2 255/35 front 295/30 rear
-Raceshop rollbar with much stronger rear strut tower brace.
Interior/Stereo:
-Converted Black interior - including, door panels, rear panels, head liner, seat belts, and black main carpet
-RZ floormats
-Rare moon roof interior cover
-JDM rear seats with panels, seat belts, and special rear carpet
-added R1 rear speaker pods for 7 speaker system
-Prosport boost, A/F, Fuel, Oil temp gauges
-Prosport center speaker pod
-Spirit R Carbon Kelvar Recaro seats
-Nardi shift knob
-red leather stitching shift and ebrake boots
-LED interior lights
-Rare red stitch Nardi wheels
-Custom install of Protege cruise control to the Nardi wheel
-RE steering column pod with 52mm Prosport boost gauge
-JKL Engineering Carbon Fiber Gauge cluster, AC panel, shifter,etc
-JVC 7inch AV system
-PowerFC commander and holder
-RE-A speedo cluster gauge
-FEED Carbon fiber rear trunk add on.
-Base model hatch cover
-added OEM fog light switch to turn FEED HID driving lights
Exterior:
-One off Feed Carbon Gas door (Shine Auto)
-Feed Type 2R front bumper
-Feed Carbon fiber canards
-Feed Carbon Fiber side skirts
-Feed wide front fenders
-FEED rear wide flares
-RE-A Carbon Fiber N1 hood
-Rotary Extreme hood dampers
-R-magic oil cooler ducts
-FEED front tow hook
-RE-Amemiya Carbon rear diffuser
-99 rear spoiler base
-AutoEXE carbon fiber rear spoiler deck
-MS replica 99 undertray
-Custom LED tail lights
-Odula carbon fiber 99 spoiler covers
-Custom rear bumper CF covers
-FEED head light cover
-rare glass moon roof
-SportTuner HID projector head lights
-LED signal lights in FEED signals
-HID FEED Signal lights
-Spirit R fender badges
-Efini front are rear badges
-Carbon look rear bumper lights
-Carbon fiber FEED gas door (one off made)
-APR Carbon Fiber side Mirrors
-Custom front canard add on
-Carbon Cooling panel (custom, made by me)
-LED bumper strip
-FEED signal light covers
-FEED door handles
-Carbon back of the door handle covers.
-Back Off 3rd light flasher
Recognition:
Booth car for Exedy Racing Clutch
Cover of Modified Magazine Jan. 2010 issue
Last year's MOTM winner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Protege03ak46
Adam
2003 Protege LX
Suspension Mods:
-Skunk2 coilovers
-Tokico HP struts
-Racingbeat rear sway bar
-Rear strut brace
-Full set of AWR endlinks
-Rear struts slotted for camber
Wheels and Tires:
-XXR 521 16x8 +20
-Yokohama S-Drives 195/40R16
-Vision Orange lug nuts
Exterior:
-Protege sedan front lip
-CorkSport eyelids
-MP3/MSP Spoiler
-Custom front grill
-6k HID Headlights
-Pilot fog lights with 3k HID
-Rally Armor mud flaps
-Hella Horns
Interior:
-MSP STS
-CorkSport shifter bushings
-Screwdriver shift knob
-Sony stereo
-5 panal mirror
-NRG bucket seats
-Harness bar
-4-point Harnesses
Accomplishments:
-Black & Slammed #1
-Featured on NW-Built.com
-Almost Evil Protege
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
cali_axela
Ryan
2005 Mazda3 hatch
Engine & Drivetrain
dynoed at 244whp w/ stock midpipe, easily at 250+ with current exhaust
Tri-Point Engineering GT2871R turbo kit
Cosworth oil cooler
Spin-on filter conversion w/ sandwich plate
Tri-Point Engineering catless 3" downpipe
3" in/out Magnaflow HFC in custom midpipe
Racing Beat catback exhaust
Exedy stage 2 clutch disc
ACT HD pressure plate
PAR engineering close ratio straight-cut gearset (complete)
Mazdaspeed lightened flywheel
Quaife helical LSD
TWM short shifter w/ solid bushings
Mazdaspeed red leather shift knob
Braille lightweight racing battery
Street Unit lower engine mount
PT-P kicker mount
Brakes & Suspension
EBC Yellowstuff pads
Motul RBF600 brake fluid
TechnaFit braided SS lines
Mazdaspeed DA coilovers (w/ 30mm shorter H&R springs)
K-Mac camber plates ("full race" version w/ replaceable pillowballs)
Racing Beat front swaybar
Custom adjustable length front endlinks
Tri-Point rear swaybar (set full stiff)
SPC adjustable rear camber arms
Speedline trunk reinforcement bar
AutoExe rear lower tie brace
Wheels & Tires
10mm front H&R Trak+ spacers + extended studs
10mm rear Ichiba spacers + extended studs
225/40/18 Kumho SPT on 18x8 RX-8 shinkas (daily)
235/40/17 R888 on flat black 17x9 5Zigen fn01r-c (track)
Rolled and lightly pulled fenders
Exterior
08 Mazdaspeed3 sport taillights
08 Mazdaspeed3 rear bumper and lower valence
Custom-molded SSG GV front lip
SSG AutoExe grille
Kenstyle sideskirts
AutoExe rear spoiler
Hen Xenonmatch foglights and highbeams
Hyper-white reverse and license plate bulbs
Chrome-dipped turn signals (front and rear)
Body-colored enigma stubby antenna
Speedline wide-angle antiglare mirrors
Smoked rear and side bumper reflectors
Smoked sidemarkers
5% tint
Interior
AEM digital sweep gauges in CP-e center dash pod (A/F, boost/vac, oil pres.)
Hyper-white LED dome and map lighting (Autolumination)
Black leather shift & ebrake boots w/ red stitching (Redline Goods)
Red+black perforated leather shift knob (Mazda OEM)
Mazdaspeed carbon fiber rearview mirror cover
Mazdaspeed3 floor mats
Mazdaspeed3 door sills
09 piano black dash strip
Stereo
Dual JL Audio 10w0v2 subs via Phoenix Gold xs2300 bridged
Pioneer D720c components via Eclipse 50.4
Custom mounted Dension IceLink iPod cradle (hardwired -- charges iPod and works w/ steering wheel track/volume controls)
Custom fabbed trunk enclosure (false floor w/ removable amp & sub covers, inset red suede accents, quick-disconnect custom wiring harness since I take it out often for the track)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Ricktalife
Erich
2003.5 Mazdaspeed Protege
Performance
-Vibrant exhaust
-Corksport exhaust hangars
-TWM shifter bushings
-AWR front motor mount
-Injen cold air intake
-Steedspeed turbo manifold
-Greddy Profec B Spec II boost controller
-ATP WGA
-Split Second Air/Fuel Controller V2
-Garrett FMIC with jet hot coated piping
-Vibrant silicone couplers and T-bolt clamps
-HKS SSQV
-Slim fans
-Vibrant vacuum block
-Prosport electronic boost gauge with peak/warn
-Prosport wideband Air/Fuel gauge
Appearance
-35% tint all around
-Yellow fog lights
-MB Weapon 17x7 wheels with Hankook Ventus V12's
-Hasawaga lugs and Bull locks
-Forcefed wrinkle black powdercoated valve cover
-Hose Techniques blue silicone vacuum hose
-Mazdaspeed oil fill cap
-Prosport hood dampers
Stereo
-Pioneer P4100DVD touchscreen
-Kicker 6x8's in front doors
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
weaksauce
Mike
1993 MX6
Engine mods:
◦Custom CAI setup w/ HKS filter and external feed (heat wrapped)
◦Battery relocated
◦Outlaw Pheno spacers
◦Oil catch can
◦PA headers
◦AC removed (short belt)
◦AWR Motor mounts
◦Clutch Masters clutch
◦Aasco 9lb flywheel
◦Magnaflow 2.5″ exhaust (no cat)
◦NGK plugs/wires
◦SS clutch line
◦CC removed
◦Grounding kit
◦Redline MT90 gear oil
◦Waterwetter w/70-30 coolant
◦Redline PS fluid
◦Partial wire tuck
◦Bracket removal
◦AC fan removed, etc.
Brakes, Wheels, Tires:
◦EBC rotors all around
◦Hawk HP + pads
◦SS brake lines
◦ATE DOT 4 fluid
◦Enkei RPF1 179 +22
◦BFGoodrich T/A KDWs 235/40/17
◦Buddy club P1 race nuts
Suspension:
◦AWR custom valved Coilover setup (Bilstein P30s/Hypercoil springs) 325fr/425rr
◦AWR front camber plates
◦AWR rear 19mm sway bar
◦AWR front and rear sway links
◦AWR trailing arms
◦New OEM control arms/tie rods/ends
◦Front and rear strut tower braces
◦Auto Power 4-point race roll bar
Exterior:
◦Original Paint
◦OEM mudflap valances w/RallyArmor flaps
◦Lamin X headlight film
◦M-edition taillights
◦GTS bug deflector
◦SPA design dry carbon mirrors
◦Longacre External battery terminals
◦Front bumper support removed
◦Debadged/ shaved/ camo’d trunk
◦VIS OEM CF hood
◦Custom Carbon Fiber front lip
◦JDM LSi side pods
◦RE Amemiya GT300 Diffuser
◦JSP CF diffuser add ons
◦Origin Lab CF GT Wing (not in pics)
Adjustable cable wing tensioners
Interior:
◦Fully gutted
◦Sound deadening removed (sanded/ painted)
◦Rear speaker deck cutout
◦Sunroof removed
◦Rear harness tuck
◦Longacre push start in cf panel
◦AMS quick release steering
◦Sparco wheel
◦Sparco seat
◦Takata 4-point harness
◦JDM stainless door sills
◦Braille 11lb race battery
◦Kill switch
◦Hello Kitty Floormat
Recognition:
http://tunermaneuvermag.com/Magazine/index.html#/86
http://minds-farm.blogspot.com/2009/...azda-mx-6.html
http://southrnfresh.com/2010/04/15/camo-mx6/
http://southrnfresh.com/2010/05/29/r...ends-dont-let/
http://nw-built.com/?p=155
Almost Evil Crew OG
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
03.5BlueMSP
Drew Nickell
2003.5 Mazdaspeed Protege
Interior:
Red LED's in guage cluster
Pioneer door speakers
Car number custom painted into shifter surround
"Upgraded" radio
Exterior:
SU brake-light overlay
03.5 "lip lip"
04 Rx8 rims in bronze
Engine/Performance:
NGK plugs
NGK wires
Corksport CAI
Samco hot pipe
Greddy 3in. cat-back exhaust dumped at rear tires
Suspension:
All stock, but new stock
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Droopy
Julio Solis
2001 MP3
Interior
Pioneer dvd touchscreen
Kenwood speakers
Kicker amp
15 in Audiopipe sub that matches car color
Some interior paint
LED light in speedometer
Exterior
VIS Evo carbon fiber hood
Custom front bumper lip
Painted grille and black emblem
Painted yellow calipers
17x7 R-Tech wheels (black with polished lip)
Kuhmo tires
Suspension
Stock MP3 struts with Tein S-Tech springs
Racing Beat front and rear sway bars
AXR clunk fix kit with bushings
HKPRO5 custom front and rear endlinks
Performance
OBX header
Custom exhaust
Custom grounding kit