N neysha_eddie Member : MSP May 3, 2010 #1 I recently i notice that at idle my wideband is not getting any readings i used to get a reading of 14.7 - 15.3 now all i get some lines likes in not reading A/F ratio. anybody might now what can cause this ?
I recently i notice that at idle my wideband is not getting any readings i used to get a reading of 14.7 - 15.3 now all i get some lines likes in not reading A/F ratio. anybody might now what can cause this ?
R Ricktalife Member : 2012 Subaru WRX May 3, 2010 #2 Your 02 sensor may be fubared. Check the connection and look for a reset button on the wideband controller box.
Your 02 sensor may be fubared. Check the connection and look for a reset button on the wideband controller box.
M MSP_4_CODY Member : 03 msp May 8, 2010 #3 or check for an exhaust leak befor the wideband sensor. does the car seem to run badly?