Wheel Size Help

M

ms6DiGi

Member

Contributor

:

Mazdaspeed6

• Mar 7, 2010

• #1

I've dug around this forum a bit to find out, but figured someone can probably help me with this in 2 seconds. I am interested in a set of enkei RP-03 wheels for my Mazdaspeed6. I want them in 19". Would these fit? It says that the 19" with 5x114.3 have a width of 8.5". Which might be too wide? Never bought aftermarket wheels before.

There is a full size chart on the website.

enkei.com/rp03.html

BTW I have mazdaspeed coilovers.

Thanks for the help.

 

Z

zweetdreamz

Member

• Mar 7, 2010

• #2

I'm sure they would work with plenty of fender work.

 

M

ms6DiGi

Member

Contributor

:

Mazdaspeed6

• Mar 8, 2010

• #3

So meaning I might just have to roll my fenders/get wheel spacers/adjust my suspension or something? Like, I'll pretty much have to get them and figure out where to go from there, but they can work?

 

Z

zweetdreamz

Member

• Mar 10, 2010

• #4

Depends on the offset.

 

N

Neofolis

Member

• Apr 1, 2010

• #5

If the offest is between 45-55mm they should work with 225-235mm tyres with some fender rolling. If the offset is outside that range or you want 245s, you may need to pull or flare the arches a bit. Personally, having fit 19s on mine I would recommend 18s, unless you have very good road surfaces and you are not concerned about performance. 19x8.5 rims a likely to add quite a lot of weight.

 

N

Navith@VarrsToen.com

Member

• Apr 2, 2010

• #6

Depending on the offset, you may not rub or not.