Stoptech Rotors, CS Lines, Hawk Pads installed

elderlycoffee

Member
:
2007 Sunlight Silver mazdaspeed 3
Definitely notice an improvement in stopping power and no more grinding from metal on metal action!

I had about a quarter inch lip worn into my front right rotor, was crazy s*** yo!


PIC-0076.jpg
 
Stop Tech

This company makes the big brake upgrade kit on my Roush Mustang. I use the Hawk HPS pads, Goodridge SS lines with cooling ducts. No pedal fade at the track all day long.
Will be changing out the rotors and pads on the MS3 when they wear out with the same setup as you. Have fun!
 
Your Strut should be Gold or yellow. Not Black....
The stock strut is black, not gold or yellow. From what I see in that pic, that's the stock strut. Where did you get gold or yellow from?

BTW, I'm sure your avatar is against the forum rules. I could be wrong though. But it is appealing, I give you that.
 
Last edited:
The stock strut is black, not gold or yellow. From what I see in that pic, that's the stock strut. Where did you get gold or yellow from?

He is saying it should be a koni sport or fsd

BTW, I'm sure your avatar is against the forum rules. I could be wrong though. But it is appealing, I give you that.

addressed
 
Back