klze swap

C

cantstopklze

Member

:

looking to put a klze into a prot-5

• Mar 5, 2008

• #1

can eney one tell me if a mx3 v6 subframe is all i need to be able to swap klze into a protage-5?

 

C

cantstopklze

Member

:

looking to put a klze into a prot-5

• Mar 5, 2008

• #2

or a mx3 v6 donnor pretty much?

 

M

MakeMeGoFast

Pursuit of HP happiness

Contributor

:

02' Protege ES

• Mar 5, 2008

• #3

Search my mang and read through, the link in my signature.

 

H

ho bag

Member

:

2007 Mazda5 GT

• Mar 6, 2008

• #4

You do not need a mx3 subframe. The kl-ze is a bolt on affair swap wise....

The wiring is the rear issue as is the custom exhaust.

Do some searching and you will find it all there.

 

C

cantstopklze

Member

:

looking to put a klze into a prot-5

• Mar 6, 2008

• #5

so ur shure its bolt on right into the 90-95 make, but the exhaust and wirring is the only problem,because i wanna make shure befor i by it and i then it doesnt fit:S

 

A

awsmp5

Member

:

1989 BMW 325i

• Mar 6, 2008

• #6

there's tons of info on here, just search

 

C

cantstopklze

Member

:

looking to put a klze into a prot-5

• Mar 6, 2008

• #7

eney ways the info i got what i need is,
You don't need to replace the cross member it's the same.
you'll need the trany,axels,2 lower suspension A arm,booster and master cylinder, engine harness and cpu from the 1.8L V6.air flow meeter, cluster.
If you don't want to have the front to low you could take the shock from the precidia V6 too they are 1/2 inch higher.

 

C

cantstopklze

Member

:

looking to put a klze into a prot-5

• Mar 6, 2008

• #8

thanxs eney ways all do what i can ,hopfuly all be able to et it done

 

C

cantstopklze

Member

:

looking to put a klze into a prot-5

• Mar 6, 2008

• #9

and what do u meen bye the wirring is rear

 

C

Crazy D

Member

:

MP5 02 22v

• Mar 6, 2008

• #10

(boom07)

 

M

MakeMeGoFast

Pursuit of HP happiness

Contributor

:

02' Protege ES

• Mar 7, 2008

• #11

what he said?