m/t drain plug and fill ???

dupakupa · Dec 18, 2006

This might sound stupid, but with one is the drain and fill plug on m/trans??
The is one big one on the front and one on the back both use (24mm socket)
But the are also 2 (6mm) Allan ones. I want to fill with Royal Purple syntec..
Do I drain the one 24mm one on the back and fill the one on the front.Or do I use the 2 (6mm) one to do it??
Because tranny is made of 2 housings..
(RTM)

SicSpeed · Dec 18, 2006

dupakupa said:
This might sound stupid, but with one is the drain and fill plug on m/trans??
The is one big one on the front and one on the back both use (24mm socket)
But the are also 2 (6mm) Allan ones. I want to fill with Royal Purple syntec..
Do I drain the one 24mm one on the back and fill the one on the front.Or do I use the 2 (6mm) one to do it??
Because tranny is made of 2 housings..
(RTM)

Its not the ones with the allen keys. Its the big hex ones. The front is fill , the lower one to drain. I dont recommend RP maxgear, i have it in and the factory stuff is better. Try going with redline mt90

Chris-BE · Dec 18, 2006

I found this somewhere, I forget.

dupakupa · Dec 18, 2006

Chris-BE said:
I found this somewhere, I forget.

thanks..Thats what I though ...but wasnt sure 100%% since i ve seen those 6mm ones..hehe(hand)

m/t drain plug and fill ???

dupakupa

Member

SicSpeed

Member

Chris-BE

Member

dupakupa

Member

Similar threads

Latest posts