kicker22705
Member
- :
- 03.5 Ti MSP
i've been getting this rattle/tapping noise from my A-pillar, when i get on it and i'm starting to think its pinging.
a lot of the engine noise gets to the cabin thru my A-pillar b/c i replaced the stock one w/ the autometer dual pod A-pillar.
the sound is coming from my A-pillar where my WB and boost gauge are mounted. at first i thought it was the loose wires from the gauges tapping the inside of the A-Pillar but i recently taped it down and i still get the noise.
its only happens when i'm boosting 5-10psi over 4k rpm.
if im not boosting i don't hear the noise at all.
i'm running a gt28rs (9psi), on a MAM built motor on 8.5:1 wiseco pistons, on a basemap microtech. my afr is about 12.5.
i'm running bkr7e plugs and 93 octane.
i can't tell if its just the vibrations from my exhaust making something rattle or if i'm actually getting pinging.
i never heard pinging before, does this sounds like the characteristics of it?
a lot of the engine noise gets to the cabin thru my A-pillar b/c i replaced the stock one w/ the autometer dual pod A-pillar.
the sound is coming from my A-pillar where my WB and boost gauge are mounted. at first i thought it was the loose wires from the gauges tapping the inside of the A-Pillar but i recently taped it down and i still get the noise.
its only happens when i'm boosting 5-10psi over 4k rpm.
if im not boosting i don't hear the noise at all.
i'm running a gt28rs (9psi), on a MAM built motor on 8.5:1 wiseco pistons, on a basemap microtech. my afr is about 12.5.
i'm running bkr7e plugs and 93 octane.
i can't tell if its just the vibrations from my exhaust making something rattle or if i'm actually getting pinging.
i never heard pinging before, does this sounds like the characteristics of it?
Last edited: