Putting on Springs

D

Domane007

Member

:

03MP5

• May 16, 2006

• #1

Can anyone help me or point me in the right direction on where there might be a guide on how to put just springs on a 03' MP5 2.0l, I am some what mechanically incline I went to mechanic school for a bit but a long time ago ,I know you need a spring compressor I can rent one but if theres a guide or if someone can help me out or should I jus' pay the $100-$150. Let me know guys. Holla!

 

C

Canecreekfreak

Member

Contributor

:

'06 MX-5 Miata

• May 17, 2006

• #2

Here are the 2 links I saved for installing springs on a protege. Don't know if they're p5 specific, but should get you close.

http://hometown.aol.com/rzr669/gcinstall.html

http://www.msprotege.com/vbb230/showthread.php?t=52033

 

R

Robot Romeo

Member

Contributor

:

02.5 P5

• May 17, 2006

• #3

I used the first link there and it was a smooth install. Try to get your hands on an impact wrench and things will go ever faster.

 

R

RaiderMS3

Contributor

:

2007 MS3 GT

• May 17, 2006

• #4

Look for the "washer fix" depending on the spring rate drop too. The rears can klunk if you keep stock struts.

 

D

Domane007

Member

:

03MP5

• May 23, 2006

• #5

Thanx alot fellas,I'll let u know how it goes, appreciate the help. Later.

 

D

dave45090

Member

Contributor

:

Mazda Protege 5

• May 23, 2006

• #6

Air tools!!!!!!!!!!

 

A

altspace

Member

Contributor

:

1990 RX-7 Turbo II

• May 23, 2006

• #7

Impact gun for the dreaded end links. A must have!

 

D

Domane007

Member

:

03MP5

• May 24, 2006

• #8

altspace said:

Impact gun for the dreaded end links. A must have!

Click to expand...

Yo are you from Jerzey also if so let me know of any Mazda shows or MP5 guys that might get 2gether once in a while. I had a few ?'s about some of the mods done to the cars in the piz you have and which 1 is yours. I have a laser blue one like in the picture. I wanted to know where 2 get those clear corners can't find them.