dorkidori_s13
Member
- :
- 2003 Mazda Protege5
Ordered my Corksport exhaust cam today!!! Now to find that peksy intake cam... UNDER $300!
What have you done to your P5 today?
- Thread starter Tg5
- Start date
- :
- -- 03 P5 / 23 CX-5 --
Next to last post........intake cam.
https://www.mazdas247.com/forum/showthread.php?123858047-JDM-Mazda-Familia-Sport20-Parts/page4
Under $300? Dunno.................
- :
- Mazda P5
Weathertech visors just came in about to install soon. Dropped my erebuni wing off to have painted stock color.
- :
- Mazda P5
Changed my oil.
ONIONSLAYER
Member
- :
- 2003 Mazda Proteg5
Oil change and coolant flush!
dorkidori_s13
Member
- :
- 2003 Mazda Protege5
I got all new Silverstar bulbs for my Familia taillights on Friday and replaced the gauge cluster bulbs as well! 
- :
- Mazda P5
What oil do you guys use? I use Royal purple with wix xp 626 filter.
- :
- -- 03 P5 / 23 CX-5 --
Depends on what is on sale..............usually Castrol Hi mileage, Penzoil platinum or mobil 1 with K&N, Mobil 1, Purolator pure one 626 v6 filter - whichever comes with 5 qt oil special.
dorkidori_s13
Member
- :
- 2003 Mazda Protege5
I had my oil filter changed I dont bother changing the oil anymore as the motor goes thru a quart to quart and a half every month... theres no point, just dump more dead dinosaur in!
I dont bother changing the oil anymore as the motor goes thru a quart to quart and a half every month... theres no point, just dump more dead dinosaur in!anywereiroam
Member
- :
- 02 p5
Haven't been on here in forever but I replaced the oil pan gasket just to find out the turbo drain is leaking at the welds. Other then that put my rebuilt turbo back in
lucky wish i had those in my area
SlowturboP5
Member
- :
- mazda protege5
Changed the alternator belt for the 3rd time in 2 years. My car likes to shred alternator belts.
- :
- Mazda P5
Just got the erebuni wing back from the paint shop and sad to see the holes don't line up. Going to have to wait til this weekend to see where it looks best and see if I want to re-drill holes or use some super sticky double sided tape.
Jackie chan
Member
- :
- Pro5
Drill it, wouldn't want it falling off. The wing is much harder to find than a replacement hatch.
- :
- Mazda P5
That's true. Don't know if I want to plug up the holes and drill new ones in the wing or widen the holes on the hatch.
- :
- Mazda P5
I like that front bumper.
I also got my erebuni wing on today. Had to drill the holes a little more.
Holes we're all messed up and one is stripped so the bolt doesn't tighten down all the way just put a bunch of loctite on and called it a day. Drove around for about an hour and it's still nice and tight. Also put on weather stripping on it. Sprayed it with a hose and not water leakage.
I also got my erebuni wing on today. Had to drill the holes a little more.
Holes we're all messed up and one is stripped so the bolt doesn't tighten down all the way just put a bunch of loctite on and called it a day. Drove around for about an hour and it's still nice and tight. Also put on weather stripping on it. Sprayed it with a hose and not water leakage.
- :
- -- 03 P5 / 23 CX-5 --
imagining in lieu of pics.................
- :
- -- 03 P5 / 23 CX-5 --
Hey, where'dja git that bumper? I scored one too, courtesy of road debris..........then drew yellow lip on it. Wanna go in on some 22v? (lol2)
Got the Protege5 running after sitting for a year.
Sent from my LG-E980 using Tapatalk
