Search results

No heat on driver side of 2011 CX-9. Heat and AC seem to work for passenger side and rear seats. Driver side heater mix door actuator seems to be moving back and forth when set temperature to hot and cold extremes. The driver side actuator is moving white arm of the heater mix door. Any...

I have the same problem. Very helpful post. Thanks Puma!

Got it checked. It was throwing the P1887 code. Sure enough, as per Puma's post below - corroded AWD solenoid wire broken at the grommet/case. Looks like they will have to remove the coupling unit. Hopefully there is enough wire inside to splice a new wire...

Tranny shop put a new differential in the tranny (splines were stripped in the old one). It cost about $2800 in total. $1,500 in parts. Differential was about $1,300, plus filter, fluids, etc. Labour was about $1,300. The new PTO is installed under warranty. All was good for the weekend...

Dealer was good enough not to charge me for labour putting the old PTO back in and will still replace the PTO under warranty once I get the tranny fixed. Tranny shop is estimating almost $3k to replace the tranny splines / differential. :-( They said they are having a hard time sourcing a...

Well I recently bought a used 2011 CX-9 (without knowing anything about these transfer case issues). After the first bit of snow I now realise AWD not working (front wheel spin and AWD blinks). Take it to the dealership and they say the PTO has failed but is covered under the PTO extended...

Can the sensor be cleaned (and maybe seal it better) or will it need to be replaced? I am in the same boat. just undercoated a new to me 2011 CX-9. It is running ok, but is throwing the same code.