Search results

Unfortunately, your engine is now beyond repair.

You are most likely using the wrong oil. The diesel engine requires a totally different oil compared to the petrol version. You cannot just jump up or swap around to what ever grade oil. It requires to be specific and you would most likely find the oil strainer & pump is clogged up due to the...

Looks like I have the CX 8 over the holidays for most likely another 4 weeks. Mazda confirmed that they replaced all the parts for the Shutter valve recall. They had the car running and performed further tests in relation to the oil pressure problem. Results?? Test confirm it is out of range...

Firstly, local Mazda dealer has been leading the charge with my CX 5. It has suffered the shutter valve problem which is subject to a recall. So they have the car for about 4 week to replace exhaust camshaft, shutter valve, injectors, vacuum servo, remove sump & clean, inspect oil pump. Subject...

My Cx5 purchased Dec, 2015 with 51,000 kms. When purchase I confirmed with the Mazda dealer that every service was performed almost on time and every update was applied. Changed the oil immeadiately, and then changed oil at 55,000 k's and then at every 5,000. Oil filter at every 10,000. Used...

The 7. & 8. are the litres per 100km figures. The 29.9mpg is the average of all the entries and then converted to US mpg. After playing around with the Fuelly site, it appears my average UK mpg is around 35.

Automatic.

Here is my data taken from the Fuelly site. 31 13/08/17 635.00 49.528 7.80 1.219 Range: 752 klms 30 1/08/17 640.00 49.839 7.79 1.225 Range: 726 klms 29 21/07/17 562.00 47.511 8.45 1.225 Range: 706 klms 28 24/06/17 688.99 49.680 7.21 1.265 Range: 805 klms 27 31/05/17 578.00 49.740 8.61 1.269...

Diesel. Problem solved. (sssh)

This info is not from the owners manual but from one of Australia's top oil suppliers. This is from their Lube data. ENVIRO+ 0W-20 is a premium, full synthetic, SAE 0W-20 engine oil. It uses the latest advances in low to mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology and...

With the advent of modern technology and very cheap electronics & apps, what monitoring apps are you using and what do you like to look at. I don't monitor the car all the time, I just use it every now and then just to check 'whats going on' I have the Forscan app using a mobile phone to read...

Penrite DL1 is the one I use. There appears not to be alot of choice, but the Penrite has slowly put their prices up. Paid $55, then $57 and the latest $62, over the oil changes. Use the Ryco ST432 oil filter. Its meant to have better filtration and last for 15k, but I change out at 10k. Reset...

....I need to type faster, Moonlighter (doh) Same here recently. After reconciling the dollars comparing the LR Discovery with the CX-5, I was only spending an extra $25- $30 over the year. So now I do an oil change every 5K and check everything. Then as per the Mazda service schedule for...

Oh, yes....can you be willing to share on how you went about this? One of the biggest annoyance the CX-5 & DPF regen is that there is no simple telltale light to show that it's active. Of course I have a OBD reader and Forscan but I don't run this every time. When I know I'm doing a regen I...

If knowledge is power, then you would have a OBD reader with the Forscan software. This will read codes and it will tell you the problem you have. It can also reset some of the codes and then you can see if they return, all before taking it back to the dealer.

Aussie, Have you worked out how they activate? Sometimes you start to park/parking and you look down to the button to find that its not on, so you manually activate, but other times I started to park/or parking and you look down and its activated. Haven't looked into it that deeply yet, but it...

Agreed. Over the years self preservation modes has come a long way. But there is a bit of logic to be used when it tells you something is going on. I wish to have an understanding on why.

I would like to get a few temps and pressures. In the LR Disco I had a Madman unit which came out of South Africa. Brilliant LCD display of Volts/engine hours, exhaust gas temp, coolant temp, oil temp, boost/oil pressure and low coolant, all fully programmable with Hi and Low alarms and be able...

Playing around with a cheap 'n nasty ELM327 reader. Got it to work with Windows 10 and using Forscan. Hopefully it will work its way into Mazda 'oil data reset' and DPF areas.

New CX 5 Grand Tourer Owner Hi everyone, New owner of a 2012 Cx5 Grand Tourer with 50k kilometers, picked up relatively cheap since its a diesel. Been working through it and have changed diff oil, engine oil & filter and looking to change auto trans oil if Mazda Australia wished to sell the...