Search results

cp-e* xFlex* Mazda Mazda3 / Mazdaspeed3 Rear Motor Mount Stage1 Mazdaspeed 3 rear motor mount from CP-E, brand new, 60 durometer hardness. I did have it on the car for 1 day until the wife complained about vibration. There is nothing wrong with the motor mount, there is too much NVH for...

I was referring to the data logs I had posted when I was doing the HT / AP shootout, these are gone now. I still have the car, motor #2 is running great, my mods are in my signature.

You are correct, for flash and forget the HT wins hands down. I like to tinker and already had an AP and knew how to use it, so the HT seemed limited compared to the AP. If I had the HT first, I probably would not have bought the AP. Really they are both good products just for different types...

Yes, it's a long story. Here is the short version. I took the car in for an oil change to the stealer (34K miles). Got home (20 miles) and it was smoking like a mofo. CHecked the oil and it was totally black, like it never got changed and 3+ qts. over filled. I think they never drained the...

Sold

crappy driver, crappy AP tune, boost leak, doesn't know how to shift ?????? hummm many possible reasons

MSMS3, you sound like a HT fanboi. I had both devices and ran both of them extensively back and forth and did a LOT of data logging. I did a lot of daily driving, city, highway and a lot of pulls on both products. I bought the HT to try it and since I already had the Cobb AP thought I would...

yea, makes a lot of sense moving this to the MS3 section....... maybe they think a lot of Mazdaspeed3 guys are looking to replace their rear sway bar ? . . . moderator, help a brother out and move it back would you ?

Thought I would post up my review "Hypertech vs. Cobb AP shoot out" I did on another forum for anyone still wondering about which way to go. I had both on my car and did a bunch of data logs with each and general drivability observations. Ok got my maf calibrated and here are the Cobb pulls...

Stock MS3 rear sway bar , brackets & ENDLINKS. This is the perfect upgrade for a regular Mazda3. Includes the MS3 endlinks (12mm). I upgraded to a Cobb rear sway so this has been sitting around. Hope some one can use it. Notice: One end link is perfect, the other works but I had to hold the...

SOLD For Sale: MS3 Exhaust ~ Excellent. Probaly less than 10K miles on the system. I only made 1 clean cut with a sawzall. The system is solid. Shortly after I got my Mazdaspeed 3 I installed the CObb Turbo back exhaust. The entire stock exhaust has been in my garage collecting dust and...

Installed a new product on the market called CurbAlert, that detects front curbs before you damage the front of your car. It's pretty sweet and gives an audible beep when you need to stop. It's adjustable and I have mine setup to alert at 18" from the front of the car. I set mine up to only...

That part is not part of the forge BPV!!!!!!!!!!!!!!!

Stock MS3 RSB just taken off of my 07 speed; replaced with an aftermarket bar. Figured a regular 3 could use one :) to stiffen that suspension up a little. Open to offers but asking $110 shipped.

you need o-ring or bad boost leak, you can also use cork gasket material and make your own, I did this and it worked great.

why u never install ?

thanks for the great write up, I'm getting a cobb rsb in a few days How do you remove the loading from the rear sway to attach it to the end links ? Thanks !

Yes, very fragile. I blew at 1 or 2 psi. Make sure your oil does not get fuel diluted, this is very very bad!

Zoom Zoom Boom ! I feel your pain! mods ? were you stock ?

Ok - I need a stock HP fuel pump. I also have a CP-E HPFP (almost new) that I can work out a deal with someone on a trade. PM me for details.