Search results

Cleaning out an old 2001 Protege (automatic), I had a piece of jewelry slip down into the shifter center console - back and behind the cup holders. I was wondering if any forum members knew the disassembly steps to remove the center console/cup holder assembly so I could get underneath and...

I've got an upstream O2 sensor connector plug on an 01 Protege 1.6L that doesn't want to release. When removing the O2 sensor plug, do you press down on the clip or pull up on the clip? Any ideas on how to pull the plug apart, it seems really tight and stuck? Thanks for any replies.

I was wanting to change the fluid and strainer out on my 01 Protege w/ Automatic Transmission and wanted to use ramps to do the job. It seems pretty easy and straightforward, dropping the pan and installing a new strainer, gasket and reinstalling the pan. This might seem like a stupid question...

When changing coolant on a 2003 Protege 1.6L, how do you drain the radiator and engine block and after doing this how would you get the proper 50/50 mix added back in? Wouldn't residual coolant in the radiator system overdilute the 50/50 mix? Thanks.

My 2001 Protege with a 1.6L engine had developed a bad misfire when it's humid or rainy until it warms up, and also when I am backing up in reverse it misfires and stalls even after its warmed up. When it warms up, it runs fine at any speed going forward all day and it idles fine at when it...

On a 2001 Protege with a 1.6L engine, what is the name of the hose that connects from the edge of the drivers side of the valve cover, comes out a couple of inches and then goes back and connects to the air cleaner intake duct hose? If that hose is disconnected or leaky, what issues would that...

My 01 Protege 1.6L is leaking oil from the cam seals and needs a new timing belt, tensioner - idler kit, cam seals and crank seal but no water pump. Was quoted about $650 parts and labor - tax included. Does that sound fair or seem high priced? Thanks.

My front exhaust pipe on my 2001 Protege 1.6L needs replaced. Guess that means a new downstream o2 sensor as well. What would be a fair price for a mechanic to charge to replace the front pipe with a new downstream o2 sensor and associated clamps and hardware? I don't want to get hosed...

I was wondering where the throttle position sensor location was on a 2001 Protege with a 1.6L engine. Any help would be appreciated. Thanks.

Would someone know where the MAP sensor is located on a 2001 Protege 1.6L engine? Thanks.

Does anyone have any idea how to disconnect the upstream O2 sensor plastic connector on a 2001 Protege with a 1.6 L engine? It has a small clip that pulls up but the connector doesn't seem to want to pull free. It has to be something simple. Any suggestions would be appreciated!

Does anyone know how to replace a coil pack boot on a 2001 protege 1.6L? When you pull the original coil pack out of the cylinder it looks like the coil pack and boot are one piece. When you buy the boots they are sold separately. How do you separate the boot from the original coil pack...

What would be a reasonable price for a mechanic to charge to replace both lower control arms on a 2001 Protege 1.6L parts and labor? Thanks.

What is the removal procedure for removing the front air duct that sits over the radiator on a 2001 Protege 1.6L to make it easy to access the upper radiator hose? Thanks.

Getting some work done on my 2001 Protege 1.6L New water pump & gaskets, timing belt, timing belt tensioner, timing belt idler pulley, cam seals, crank seal, upper radiator hose, coolant. Quoted $850 parts and labor which includes tax. Is that a reasonable estimate or is that too high for...

I have an a 2001 Mazda Protege with a 1.6 L engine and the noisy water pump will need replaced soon. Since the timing belt has to come off to replace the water pump, what would be a fair charge for a mechanic to put on a new timing belt when doing the water pump? Since the belt has to come off...

When replacing the water pump on a 2001 Protege with a 1.6L engine, does the valve cover have to come off or is there any way the pump be accessed without taking the valve cover off? Thanks.

Does anyone know which aftermarket company makes the highest quality, best fitting replacement radiators for a Mazda Protege? Thanks.

Fellow Forum Members: Any help would be appreciated on this issue. I had rusted out rear strut mounts replaced on my 2001 Protege last October. The towers were good and sound. I went ahead then and had a mechanic replace the rear struts, mounts, bellows and bumpers using all KYB products...

Does anyone have familiarity with Protege charging systems? On cold nights, my Protege won't start. Checked the fluid level in the battery and it was fine. I checked the battery voltage with no load across the terminals and it shows 12.79 volts. Did a load test with a multimeter and got...