Recent content by zoooom

Michael, before I install the SPC camber arm, I didn't notice any rubbing with my wheel arc. After the install, I haven' tried to carry full load, so not sure if it will rub. Below is the picture of my car. Also attached are the SPC arm pic and the !@%# exhaust hook. VenomDesign, that is bad...

I had that steering wheel vibration problem during braking few months back, especially during hard braking. To resolve it, I removed both front disc brake and send it to the machine shop for regrinding to remove the warpage. That pretty much resolve the problem. Alternatively you can change the...

OK, finally managed to remove the dang! bolt of the left side upper arm after bending the exhaust hook down with a lot of force. Yeah, the right side was easy, but the left side took me many hours. I also shorten the bolt by grinding off half inch so it will be easier next time. Agree too that...

Hi all, I am new here. I just bought the SPC rear upper camber arm. Firstly I bought Celica arm after being told they are the same, but they are not! I have to grind off the bushing to fit M5. Secondly, I just can't remove the upper bolt from the left side arm since there is exhaust hook...