Recent content by steinfire

I just finished mine today DDM - 5000K (35w) you have to remove 3 screws from the rad fluid tank on the pass side to get to the low beam headlight assembly mounted the ballast between the cooler tank and wall factory halogen in pass.....hid in drivers

just did mine today this should help alot....install instructions with pics https://ddmtuning.com/support/index.php?_m=downloads&_a=viewdownload&downloaditemid=14&nav=0,1 I ordered them from DDM Tunning, I like everything about them but I wish the blue and black wires were on a connector...

Does anyone have pictures of the HIDS that they installed? Everyone is saying 4500k but I just wanted to make sure it is not yellow looking.

What output did you go with and do you have pictures of them on? I cannot decide between 4500k, 5000k, and 6000k. I do not want a yellow tint, I like the blue tint, but still want the best vision at night.

How is the angle of the screens? I noticed that our headrest are tilted forward a good bit and think the screens may be hard to see at that angle. Do you have a picture of the screens installed in a CX-9? Well the flip down DVD/PS2 is installed and ...............it does block the entire...

I was wondering about this step. Did you drill a hole in the back plastic cover? Just trying to make sure. I'm trying to decide between 4500k, 5000k, or 6000k. I do not want the bulb to have a yellow tint and I like the bluish tint but I do want to be able to see well at night.

thanks for your install steps What output did you get? Where are the pictures?(toetap) I may order me a set this week.

can I get the relays from Autozone or O'Reillys ......or do I have to go to the dealer for this? What is the reason for this? Just wondering.

I had this happen to me today. I started the car again and cut it off and it did not do it again. If this happens again I will try this. Thanks for the info

I guess I should have looked around more for headrest dvds instead of getting the overhead one.

Thanks, (2thumbs) I would like to know where they came from too....I did not even know that they were not factory rails. I did not find out until another member on this site mentioned it. I posted a thread earlier today asking for help with the rails...

Yea, I could not believe that they drilled holes in the roof when there are already holes there. I really hope that they were not installed by the dealer. I dug through some papers and found out the where the car was purchased at. I will call the service dept and ask if they know anything...

We just bought this last week and I did not notice the non OEM rails until someone from this site mentioned it. I do not know why the previous owner did not use the factory rail and pre- drilled holes. I checked the rails and they are very secure but I do not know what brand they are. We need...

We got the windows tinted on my wifes CX-9 today. Now I just have to make sure she don't roll down the windows for a few days. 5% over the factory, 5% visor strip, and 35% on front drivers and passenger. I really like the way it looks now. Its overcast so I hope it still looks this dark in...

I wish we has blind spot monitoring but we do not. We take a lot of trips and the CX-9 will hopefully make them more enjoyable that the long rides in the past.