Recent content by onequickmsp

I've had a Greddy catch can since day one. It's still bone dry. If you ask me, it was a waste of money.

Hey guys, I need help! I recently went for an emissions test and failed the curb idle miserably! Limit is something like 0.62 and I was at 8.54. My mechanic hooked up the scanner and found that the o2 sensor is stuck at 0.45 and won't budge. I ran sea foam, then give it an oil change and...

14.71 with a bad launch at the 1/4 mile.

Hey guys, I wonder if you can help me out. I've had a Unichip on the car since 2006 and last October I noticed that the car started acting weird as it got colder outside. It would want to stall as it came to a stop and it was burning PIG RICH!! So much so that it burned my brand new Magnaflow...

It's the LSD.

Rotary in a MSP. Now that's a swap!

Round 1 1. IngreXCo - 9,000 2. JDM Sam - 12,000 3. 03BlkMicaSPD - 10,000 4. Gcotton - 15,000 5. T3ase - 24,000 6. Romeo1 - 20,000 7. 03Speed - 23,000 8. 035msp - 12,069 9. Wanta Fanta - 17,000 10. Collegejoe101 - 15,279 11. BillyJoelDwain - 19,000 12. Cam2 - 13,000 13. Arlsmazdaspeed- 15,000 14...

Worst: The LSD failing in the office parking lot where I was doing my income taxes and all the money I was supposed to recieve going to pay for the tow and the new LSD and Stage 1 clutch. Also, SU screwing me over when I paid for overnight delivery on the clutch and it taking a week for the...

I'm looking at getting a Forge WGA. I was working on the car yesterday and noticed that it wistles a bit when it starts up from a cold start, so I took the vacuum line going to the wga and blew into it and wouldn't you know it, air was escaping. Air escaping from the wga is a sign of a finished...

I noticed that one of the bolts to the manifold-turbo was loose so I tightened it and it's not doing it as much so I'm putting my money on a leaky gasket. Is there a "how-to" for replacing gaskets? I did a search but found nothing. Thanks!!

That was my first guess but other people are telling me that it might be a gasket.

Ok, so for a few months my car has been making a weird "gurgle" noise. I've tried to track it down with no luck. I've pulled off the heatsheld and checked the manifold for cracks or carbon buildup, I've checked all my connections and made sure that all pipes are tight. I just don't know where...

I ran a 14.712 at Toronto Motorsports Park during the "Meeting of the Mazdas event (MotM). I run with a CustomMSP SMIC, Turbohoses Hardpipes, Forge BOV, Injen CAI, Greddy SP2, and Unichip @ 12psi. Here is a link to my timeslip...

DGmotorsports.com