Recent content by edmartz

  1. E

    Fog lights with high beam mod? CX-5 GT 2014

    Hello, I'm still wondering how to do this, I don't want to mess up something. Hehehe. Has anybody done this modification? Thanks!
  2. E

    2014 / 2016.5 OEM headunit swap

    A cheap solution is buy a Bluetooth adapter, and connect to the aux. You will have better sound than the original BT in the head unit.
  3. E

    2013~2016 Canbus alarm Mazda Cx-5 2014 GT

    Hi!, I research about if my CX-5 GT 2014 has factory alarm installed, and I make a test leaving an open window, close the doors with the keyless fob and what surprise, nothing happen!, so I google about and It is seems that USA model doesn't have a factory alarm. I want to install an alarm...
  4. E

    Fog lights with high beam mod? CX-5 GT 2014

    Hi, I'm trying to research how to mod the fog lights when high beams are on for my 2014 CX-5 GT AWD and only found information for the Mazda3. Has anyone done this job? Thanks for any advice. Edwin.
  5. E

    Weird behavior from auto in Mazda3 2007

    Hello, I have a Mazda 2007 2.3 with AT 5 speed 128k miles and one year ago I had issues when shifting from 2nd to 3rd. Two weeks ago I got the error "P2709: Shift Solenoid F Electrical" and it only goes to 3rd gear (I think was a limp mode). Yesterday I move the car and left it directly in...
  6. E

    Help! Mazda 3 2007 Headlights factory alignment

    Hello, I need your help, I ruined the alignment of the headlights of my Mazda 3 2007 2.3. Is there a factory point to start over? Thanks by any advice! Edwin.
  7. E

    Where is A/F sensor connector? Mazda 3S 2007 Error P0131 / P2251

    Hello,I found some info: Check Engine light with the codes P0131 / P2251 : The Technical Service Bulletin 01-015/10 recommends checking the front air/fuel ratio harness where it rubs against the bracket. This photo shows where. If the harness is damaged, the TSB recommends replacing the A/F...
  8. E

    Where is A/F sensor connector? Mazda 3S 2007 Error P0131 / P2251

    Hello!, some months ago I got the check engine on, and when I read the fault codes I see P0131 / P2251, and I let it pass the time. Because this is my wife's car (mazda 3s 2007) today she ask me If I fix that :(.. I start googling and I found the replacement that is a bosch #15733 (4 wire)...
  9. E

    Brake Module (ABS) leak Mazda 3s 2007

    Thanks, I will try, but because I import my Mazda from USA the local dealer doesnt know / care this vehicles.
  10. E

    Brake Module (ABS) leak Mazda 3s 2007

    Hi!, On one year ago I have an issue with a loose (Rear Right) brake line, so I got air in the system; I tight the line and I felt sponge the brake pedal. With the use, I saw some breake liquid on the booster I suppose was the master cylinder, today I planned to change the master brake, and I...
  11. E

    strange issue with the A/C

    Hi!, finally I solved the problem. The problem was related to the blower resister.. I buy a used one, installed and now the four positions works well. I found the explanation here: http://www.justanswer.com/car/3npto-2002-mazda-protege-turn-ac-on-blower-motor-position.html Here is the schematic:
  12. 2010-06-23_144249_pic.gif

    2010-06-23_144249_pic.gif

    • edmartz
    • Media item
    • Comments: 0
    • Category: Other Mazdas
  13. E

    strange issue with the A/C

    :( do you think I have two problems?... this weekend I will disassemble the panel to inspect this... Thanks Edwin
  14. E

    strange issue with the A/C

    :(... I found a related thread, I will keep searching.. http://www.mazdas247.com/forum/showthread.php?113658-A-C-only-works-in-position-1-amp-4/page12
  15. E

    strange issue with the A/C

    Blower pos 1 desnt work Mazda Protege (SOLVED) Hi! I have a issue width my A/C. When I put the selector in 1, the AC button is on but the fan doesnt work when I put the selector 2-4 the fan works but the AC button goes off.. what do you think? best regards, Edwin..
See more
Back