Recent content by cloves

The TCM is probably toast if its the exact same situation as mine. Its right over the transmission and was pretty expensive when I changed it. I think I paid like 400 or something online and its OEM. Car has been fine since then. When the car shifts from 3 to 4 after an aggressive acceleration...

Did you change your transmission fluid recently? Just trying to see if there is a correlation or it's just that my TCM happen to go bad after the fluid change. Sent from my HTC One M9 using Tapatalk

I thought i updated this thread. Anyways, I ended up swapping the solenoids that are in the transmission very simple to do and still had the problem between 3rd and 4th which obviously means the solenoids were okay. I ended up swapping the TCM and that solve the problem. The TCM is right above...

Brute what are you using to get your engine codes? Display looks nice. Sent from my HTC One M9 using Tapatalk

I think they are about $100 bucks or so. But I would like to narrow it down to a solenoid or TCM before I drop more money.

P0753 & AT Light - 2007 Mazda 2.3L - Transmission Fluid Change & Troubleshooting Hi everyone, Hoping I could get some help on this issue. Bought a 2007 Mazda 3s 2.3 with 5 speed automatic with 96k on it. I know the owner she has taken very good car of the car oil changes, brakes etc...

Sorry to revive this old thread but just in case. I replaced the MAF with a new OEM MAF which I purchased online. That fixed the problem.

Hi everyone, today the front tire on the car had a blow out at the what looks like the valve stem which is connected to the TPMS. The tpms sensor got destroyed and needs to be replaced. We need to buy a new OEM one of aftermarket. Anyone have any recommendations? Does anyone have information on...

Sorry everyone I guess the forum doesn't email us when we got a reply. We changed the Mass Air Flow Sensor to a new OEM one, Denso 197-6020 Mass Air Flow Sensor . Problem solved. Car has been running fine since then which is over 6 months. Weird that the ecm threw the other codes. I checked the...

Hi everyone, We are having some issues with our Mazda 3. Code scanner is giving us a P0113 (IAT High Voltage) plus the TCS/DSC light comes on at the same time. The battery light also is coming on and off. the MAF/IAT was replaced about 8 months ago. Back at that point the car had hesitation and...

Hi guys, well I cleaned the MAF yesterday and even cleaned to Throttle Body (following the TSB). The car turned the code on after a 20 minute drive. P0103 and also the DSC light came on as well. Both have been coming on at the same time. I checked the connection by the MAF, sprayed it with...

pmpott did you ever fix this issue? We have the exact same issue. The p0103 and the TCS/DSC coming on.