Recent content by 1SICK6

So this install became a nightmare after a few mistakes were made. I rectified all the mistakes I could possible solve minus this one. I have an 06 Speed6 and I recently installed a GT2871r. Prior to this I installed a CP-E top mount intercooler, CP-E high pressure fuel pump, CP-E safe seal...

So incase anyone was wondering, I solved the issue before it caused too much damage. The grounding out of the motor damaged at least two of the coil packs. I replaced both of the bad ones and the car is running much better. Nearly normal minus the fact that I'm running the bad Autolite XP...

I have a stock K0422-882 that came out of my 2006 Speed6. I rebuilt it, and when torquing down the shaft nut managed to break the end off. I was looking to sell it but obviously this needs to be replaced. I couldn't find a shaft for the K0422-882, but did find several for the K0422-582 that is...

Looks like you were right, the coil pack was bad. It functioned fine prior to the installation of my poorly thought out battery tie down. I replaced it with a new unit and it seems to be working properly with no issues. It ceased blowing fuses and will hold idle nicely. Cars still in the process...

I have an 06 Speed6 that I just performed a GT2871R upgrade on. The car has all the supporting mods necessary. I have a CP-E high pressure pump, Sure 3" Aeros intake with 4" inlet, CP-E injector seals and top mount intercooler, and AWR engine mounts. I just did an oil change and topped off the...

For anyone interested in any/or all of the parts I have listed here, I am willing to sell all the items listed here for $550.

2006 MS3/MS6 Engine parts for sale After the death of my stock engine and the ridiculous amount of money Mazda charged me for a new assembly, I decided it was best to reclaim the old assembly to salvage whatever useful parts there may still be. Mazda didn't care for stripping the blown engine...