2017~2024 My LCA bushings after lowering the CX-5

[zolo0727]

I'm a owner of CX-5 from Shanghai China. This is it's appearance now.
First of all , sorry about my English skill.
After I upgraded my suspension for RS-R best i coilovers , the body was lowered about 10cm.( without any other chassis parts replaced)
Then the clunking noise came from front end when over bumps.
Let's see some photos I shot when wheels landing.
(all those wet from WD40 ,not oil stains)

(left LCA bushing )

(left LCA bushing)

(right LCA bushing)

(when the left wheel rolled over the speed bump , see the difference)

I'm not sure those are the reason why clunking occurred .
I still have no idea why both LCAs change the angle after lowering the car.
Next step, I'll replace them for Hardrace LCA with hard rubber bushings. I wish they will be corrected after that and clunking noise disappeared .

 

[CX5_Driver]

I am not finding the CX-5 on the RS-R website. Can you share what parts were used?

RS-R

Precision engineered car parts

www.rs-r.com

previous discussion talking about a Mazda 6:

RS-R Sport-i Coilover Review - #ProjectSix

Hey Everyone, Below is my thoughts and review on the RS-R Sport-i Coilovers Here is the Link if you are interested in buying after the review: Click HERE for RS-R Sport-i I recently purchased a 2015 Mazda 6 to basically start a project build since the new 6's look incredible. So of course the...

www.mazdas247.com

 

[tibimakai]

Maybe something is not tight, after the installation? Tower nuts?
I have lowered my car(2014) 82mm and there are no weird noises.

 

[zolo0727]

I am not finding the CX-5 on the RS-R website. Can you share what parts were used?

RS-R

Precision engineered car parts

www.rs-r.com

previous discussion talking about a Mazda 6:

RS-R Sport-i Coilover Review - #ProjectSix

Hey Everyone, Below is my thoughts and review on the RS-R Sport-i Coilovers Here is the Link if you are interested in buying after the review: Click HERE for RS-R Sport-i I recently purchased a 2015 Mazda 6 to basically start a project build since the new 6's look incredible. So of course the...

www.mazdas247.com

SPORT-SERVICE RS★R / TOPページ

****No1*************************************

www.rs-r.co.jp

Hi,dude. Check this out. I bought them from Japanese.
Best i or Basic , two options for coilover.
Thanks for that Mazda6 page. Let me have a look.

 

[zolo0727]

Maybe something is not tight, after the installation? Tower nuts?
I have lowered my car(2014) 82mm and there are no weird noises.

I reinstalled the front springs and shocks for 2 times.
They must be tighten .
That clunking noise comes from the seats below both sides. @。@
Those bushings look different from any other on CX5 , 6 or Axela.
They maybe replaced by cheaper parts by manufacturers in 2020 which made here...