Mazda part # ?

[shep]

Does anyone know the part # for wheel locks for a 2019 cx-5 gt

 

[Sig cx-5]

Here's the p/n for chrome locks: 0000-88-120D-BP

 

[shep]

Thank you

 

[Jo_Bob6000]

Depends on if it has 17mm or 21mm lug nuts. The above part# is for the 21mm.

 

[shep]

Are some 17mm and others 21mm ?

 

[cz5gt]

IMPORTANT: As of May 01, 2018, Japan produced vehicles use lug nuts with 17mm hex head instead of 21mm the thread remains the same.

Use C9N1V9740 wheel lock set if the vehicle is built on 5/1/2018 and after, and the VIN is equal to and higher than: 2018 MAZDA3, JM1BN1L39J1191046 2018 MAZDA6, JM1GL1UM9J1316386 2019 CX-3, JM1DKFC76K0406293, JM1DKFC76K1406305 2018 CX-5, JM3KFBDMXJ0405520, JM3KFBCM7J0405511, JM3KFBDM8J1404456 2018 CX-9, JM3TCADY5J0231737 2018 MX-5, JM1NDAM70J0206203 2019 MX-5, JM1NDAB76K0300011

 

[Sig cx-5]

IMPORTANT: As of May 01, 2018, Japan produced vehicles use lug nuts with 17mm hex head instead of 21mm the thread remains the same.

Use C9N1V9740 wheel lock set if the vehicle is built on 5/1/2018 and after, and the VIN is equal to and higher than: 2018 MAZDA3, JM1BN1L39J1191046 2018 MAZDA6, JM1GL1UM9J1316386 2019 CX-3, JM1DKFC76K0406293, JM1DKFC76K1406305 2018 CX-5, JM3KFBDMXJ0405520, JM3KFBCM7J0405511, JM3KFBDM8J1404456 2018 CX-9, JM3TCADY5J0231737 2018 MX-5, JM1NDAM70J0206203 2019 MX-5, JM1NDAB76K0300011

^^ This is correct. Sorry for the misinformation. While either would fit, the key for the lock would need a 21mm socket. Probably not something you would want to carry around with you.

Here's a link with this info:
https://www.prioritymazdaparts.com/oem-parts/mazda-wheel-locks-chrome-17mm-diameter-c9n1v9740