I can't wait till you get those sway bar bushings replaced. That's still my bet...Hey guys... another update.
so I changed the top hydraulic motor mount and the noise is still there. I thought for sure this would do it. Ugh I’m so burnt out on this. I can’t believe I can’t locate this clunk. My next peice is the sway bar bushings.
many other suggestions guys????
...well hopefully, after the bushings are replaced,it should drive like new now with everything you've done.they are gonna be replaced... I got one and waiting for other. My Local parts supplier only had one and waiting on other to come fom eBay. I lost sleep last night.....
I’m gonna check and do this procedure. I never seen this!You did do all the cowl bolts too ?
Rattle / Pop Noise from Instrument Panel and/or a Creak Noise from A-Pillar – 2013-2015 Mazda CX-5 | | Mazda2013-2015 CX-5 - RATTLE / POP NOISE FROM INSTRUMENT PANEL AND/OR CREAK NOISE FROM A-PILLAR OVER ROUGH / BUMPY ROADS APPLICABLE MODEL(S)/VINS 2013-2015 CX-5 vehicles with VINs of JM3KE******514170 ormazda.oemdtc.com
Ok fellas so I have a update on this....I’m gonna check and do this procedure. I never seen this!
Oh that's so good to hear thank you for reporting back this will help othersOk fellas so I have a update on this....
So I retightened all of of the lower cowl bolts according to this TSB and it FIXED THE KNOCK NOISE!!!! It no longer makes the noise! Thank you mazdadude for the info!
Thank you so much! Problem solved!!!!