I have a 2012 Mazda 3, 2L, non-sky, auto with a/c. 125000kms. Going back about 2 months the noise started. Shortly after Mazda did a front end alignment. Not saying it is related. I can not pin point the noise. It is like a clunking sound to me but know everyone describes sounds differently. It is only over small bumps. Train track and speed bumps don't cause it.
Things I have replaced:
Both struts, coils, strut plates and bearings (this month)
Steering knuckle (this month)
Front drivers wheel bearing (this month)
Both tie rod ends (this month)
Both front stabilizer bar bushings and end links (this month)
Both front rotors and pads (this year)
Both front control arms with ball joints (drives this month / passenger last year)
What am I missing? The noise is driving me crazy. Next drive I drive I will try and get audio of it. But any ideas would be great.
Thanks
Things I have replaced:
Both struts, coils, strut plates and bearings (this month)
Steering knuckle (this month)
Front drivers wheel bearing (this month)
Both tie rod ends (this month)
Both front stabilizer bar bushings and end links (this month)
Both front rotors and pads (this year)
Both front control arms with ball joints (drives this month / passenger last year)
What am I missing? The noise is driving me crazy. Next drive I drive I will try and get audio of it. But any ideas would be great.
Thanks