• Got Stuff to Sell or Buy? You can post an ad for free in our Marketplace, just follow the Rules. Thanks!
  • Mazdas247 is an Amazon Associate and earns from qualifying purchases.

Search results

  1. A

    WTB: Mazdaspeed Protege LSD

    Mine went south. Plan on selling after installing a new one
  2. A

    Odd location of oil leak, people VERY familiar with 2.0L enter...

    I found an annoying oil leak around the oil filter area. It's just above or towards the center of the car from the oil filter. I think I felt an oil line down there, but can see anything due to the intake runners blocking everything. I know for sure it isn't a loose oil filter(cleaned...
  3. A

    MSP cdcv needed

    Anyone have a canister drain cut valve used in working condition? Mazda ZM0118741A Im sick as hell of not being able to fill my gas tank. I'm replacing the purge solenoid valve under the hood due to code and the cdcv valve at the back of the car due to a small evap leak or blockage detected...
  4. A

    03' front bumper OE part number?

    I have a spicy 03' that an elderly lady decided to turn into me head-on while I was minding my own business at a stop sign. Its a shot in the dark, but my body shop assures me that if they have the OE bumper part number that they WILL get it
  5. A

    MSP p0090 and p0660

    Fuel Pressure Regulator Control(PRC) Solenoid Valve, Exhaust Gas Recirculation(EGR) Switch for Mazda RX-8/626/MPV/Protege by LIAMTU https://www.amazon.com/dp/B073DZK4QR/?tag=m20b7-20 Is the part no for both of these the same? Ive read on here that the Vic and vtc are interchangeable, is the PRC...
  6. A

    Pipes hard to get off turbo

    Im getting ready to replace my exhaust mani gasket and cannot the pipe from the turbo to the IC off! Feels like its gonna crack if I pull any harder than I already have. I wanna have as much room as possible without having to taking the turbo off the mani(ive read here it can be done by many...
  7. A

    Cdcv gas fill up problem

    Took my vent system apart to try and find my gas fill up problem. The check valve was clear, the canister had gas, and the cdcv module had gas. I got air flow in both directions through all 3 pieces. The spring moves freely in the cdcv module. I put about 4 gallons in the tank to see if I still...
  8. A

    P0660 and p0703 at the same time?

    These two are unrelated, but popped up at the same time while sitting at a stop light. No irregular idle or electrical issues. Vacuum is at 20 and boosts to 6.5-7. I checked the connector to the solenoid and seemed good, the solenoid wasn't melted or anything and the hoses were actually in...
  9. A

    Wtb: perfectly working as new MSP wga and/or bpv

    Looking for a working as new WGA (ATP 6lb) and or OEM BPV. I can't find the ATP one for around $60 like everyone says it costs. The atpturbo.com site says $89?
  10. A

    Key fob died,.... i think

    Had a key fob die all of the sudden, so I changed the battery. It didn't work, so I went through the programming sequence and got nothing. It would not finish the sequence, as in it would not do the final step(any button on the fob twice to link to car). I checked all the fuses, besides that...
  11. A

    wtb spicy hood

    Anyone have a spicy hood they wanna sell? Located in Kansas, would like something somewhat close
  12. A

    wtb side plastic to center console by passenger left foot

    I posted this here since im not sure if the p5 piece is the same as my 03 spicy MSP. would like the same color.....
  13. A

    mazdaspeed 03 lower splitter

    Does anyone have a source for the lower front splitter on a mazdaspeed protege, 2003?
  14. A

    double check mp3 wheels on mps

    Im confirming info here, but mp3 wheels are the same dimension as mps wheels, 17x7 50mm? Any problems with fitting mp3 wheels on a mazdaspeed protege?
  15. A

    AWR Gstock Mazdaspeed Protege

    Really more so i don't have to write it down, lol. This just makes it easier to have pics in with my thoughts at the time and maybe help anyone doing a msp for stock class. Also, alot of people are afraid to go try autocross cuz they think they need X amount of power or high dollar stuff. This...
  16. A

    AWR Gstock Mazdaspeed Protege

    Went to heartland park, former nationals site, this weekend for a divisional. Got to weigh the car, 2714#. Wish i would have taken out the random crap out of it, probably five pounds worth. Still on stock exhaust and had 3/8 tank of gas. Looks like it will dip into the high 2600's all said and done
  17. A

    AWR Gstock Mazdaspeed Protege

    Haven't had much time to make events in the car. Went to the Colorado match tour and ended up running RTA in Craig Wilcox's TT. Placed second in class behind Craig in a class with some good RTA drivers. Placed 11th in the match tournament. The pic is from a local Kansas City event. The course...
  18. A

    03.5 spoiler questions

    Does the 03.5 spoiler use the same mounting holes as an 03 msp or regular protege? Also, don't want to post this in the for sale section, but what is expected to pay for one of the 03.5 spoilers? Seen some for sale in the for sale section, but they don't seem to move too fast?
  19. A

    AWR Gstock Mazdaspeed Protege

    A few more spring nationals pics. Photo credits go to Craig Wilcox
  20. A

    How-To : AWR Rear Mount Install

    Did all four mounts and it wasn't that bad. I sprayed every bolt with penetrating fluid days in advance. Might be overkill, but i sprayed them twice a day three days prior. All the bolts came off with little fight. As said before, about 3ft of extensions and a 1/2" drive swivel and its pretty...
Top