Search results

  1. M

    2015 Build Thread

    Well, after having the old Protg in storage for a few years, I pulled it out his year and finally decided to get back to work on it. For those who missed the previous thread from 2011, look here: http://forums.beyond.ca/showthread.php?threadid=333096 Quick background of the major points, car is...
  2. M

    What happened to the Ferdi Trans Brace thread?

    Can't find any reference to them anywhere. Links are now invalid. What's the deal here? I'm really hoping this isn't another case of an AMM not paying his fees... Would really like to get in touch with him regarding a piece I'd like to have made. So, what happened? Mods?
  3. M

    Project: White Lightning

    The truck is named sarcastically of course. There is nothing "lightning" about a 2.2L S-10... First off, I'll present the truck: It's lightly modded, CAI, Beltech 2" drop spindles, 1" drop leafs, rims, tint, system, clear corners, etc. My favorite mod has to be the white lettered...
  4. M

    Can't we stop the spam?

    Lately this forum has been inundated with spammers. I'm very active in about 8 online forums, and this one is by far the worst for spam. I don't look at my "new posts" to have them all filled with how I can "purchase cheap iPhone Samsung true religion lowest cost beneficial quality" and no less...
  5. M

    MSP / MP3 Rear Skirt

    Brand new in box. Was painted yellow, has been sanded and is ready for paint. This is the "MP3 style" lower skirt, NOT the '03.5 style. Includes all Mazda hardware and instructions. Price does not include shipping, I am in Canada and will ship your method of choice (Post, UPS, FedEx) $160...
  6. M

    MSP / MP3 Radio pocket

    Great shape, door springs shut nicely. Nothing broken. Price does not include shipping, I am in Canada and will ship your method of choice (Post, UPS, FedEx) $30 Paypal: nick.holinski@shaw.ca
  7. M

    1.8L Coil Pack Conversion

    Taken off a good condition 1.8L Protege. Mileage unknown. Price does not include shipping, I am in Canada and will ship your method of choice (Post, UPS, FedEx) SOLD Paypal: nick.holinski@shaw.ca
  8. M

    Progress Lowering Springs

    Some rust, comes with dust boots, etc. Price does not include shipping, I am in Canada and will ship your method of choice (Post, UPS, FedEx) SOLD! Paypal: nick.holinski@shaw.ca
  9. M

    FS: MP3/MSP Spoiler

    "Pagoda" style, BNIB, primed ready for paint. Includes new torsion bars (for the heavier trunk weight) and all hardware needed to install. Like I said, this unit is brand new, straight from Mazda. Mazda part numner 0000-8Y-C05A-00 Retails for over $300 new. Price does not include shipping, I am...
  10. M

    Maxx Mazda's 2011 Build Thread

    Well, the time has come to revamp the P5. Got bored of the old setup, so I decided to tear it all down and go for something new. Engine is being rebuilt again with CP 8.5:1 custom oversize pistons, Pauter rods, custom built head with oversize valves, and Integral stage 3 cams, etc. The turbo...
  11. M

    FS: Magnecor Wires. Mazdaspeed High Pressure Rad Cap

    All prices are shipping extra. Magnecor wires, used about 3 months. Look brand new. $60 Genuine Mazdaspeed 1.3 Bar rad cap SOLD!!! PM me for shipping quotes if you are interested. I can probably fit both in a Canada Post bubble mailer, so shouldnt be too much.
  12. M

    Interesting transmission find

    Compare the 5th gear side of my 2002 P5, with my '03 LX. Note how the LX has no synchro cone or rings for reverse, and the LX secondary shaft is shorter. (Lacking that big spacer before the nut.) All of my parts diagrams and other Protege trannies I've taken apart all correspond to the my P5...
  13. M

    How's THIS for a broken diff?

    303,000Km on my COMPLETELY STOCK LX and the diff let go. All the bolts sheared, now I have to rebuild the trans. This car is completely stock, and I baby the shit outta this thing. I drive it like an old granny in florida! Without warning, just snapped and let go. I know these diffs are weak...
  14. M

    Haltech E6X Install Guide

    E6X Installation Guide BJ Protege Nick Holinski This is meant to be a comprehensive guide on setting up the Haltech E6X for use on the BJ series Protege. May work with other models as well, however the ECU pin outs given are specific to the Protege. After seeing far too many other guides out...
  15. M

    FS: SPEC Stage 3+ Clutch and SPEC Flywheel

    Part number SZ493F it's the SPEC stage 3+ clutch, pressure plate, and SPEC 7lb flywheel. Barely used, as you can see still plenty of life left in it. Used for one summer, about 5,500Km. NOTE: THIS WILL FIT ALL 3RD GEN PROTEGE MODELS (MSP, P5, MP3, SEDAN) I will seperate the clutch and flywheel...
  16. M

    FS: Greddy Catch Can

    Genuine Greddy Catch can. Used it for oil, you can use it for whatever. Paid $110, asking $50. Comes with hoses if you'd like and mounting hardware. SOLD!!!
  17. M

    FS: Spec Stage 3+ Clutch / Flywheel Combo

    Part number SZ493F it's the SPEC stage 3+ clutch, pressure plate, and SPEC 7lb flywheel. Barely used, as you can see still plenty of life left in it. Used for one summer, about 5,500Km. NOTE: THIS WILL FIT ALL 3RD GEN PROTEGE MODELS (MSP, P5, MP3, SEDAN) I will seperate the clutch and flywheel...
  18. M

    Clutch Needed - For Diesel Truck Apparently...

    With 400HP+ 1st gear is utterly useless. I launch in second unless I'm going to get groceries, and my SPEC 3+ isn't up to the task anymore, espesially when at the track. In 2nd gear, it'll slip all day long espesially if I use the Anti-Lag on the Haltech. (Also have SPEC flywheel.) It says it's...
  19. M

    An interseting idea for a shift knob...

    So I LOVE the stock Protege knob, and refuse to part with it. The size, weight, and texture are all perfect for me. Well, on my winter beater, the old knob was getting really worn out. It was all shiny from being used almost 300,000Km, and the numbers were completely worn off the top and the...
  20. M

    Some fun at the Quarry

    I haven't been on the forum too much lately, but here's some quick pics of me doing my other favorite thing last week. Nothing special, just went to this quarry by my folk's place and fucked around for a bit. Ready to roll: Just a small jump: Kickin' up leaves: Lowridin' on the...
Top