njaremka's latest activity

Skip the 626 manifold. You'll lose some high end flow, and you'll lose the VICS chamber. Keep the Protege manifold, and remove the...

You're going to have a ton of poke with that wheel. What size tires were you thinking? OEM wheels are 215/45-18 on a 18x7+55. Going...

P0171 is a lean code, and P0106 is a MAP sensor error. Maybe the MAP sensor is bad, or going bad? Or, you have an air leak in the...

210°F is probably a little bit high for those engines. Sounds like the cap helped. I would maybe plan on replacing the thermostat. It...

Did you replace the passenger wheel bearing? Usually you can determine if it is a wheel bearing and what side by driving the car from...

Still, to be able to run those big brakes with 16" wheels is a nice option

That is awesome! I always wondered if the 16" wheels would fit over those brakes. Well done!

Holy moly! Do you have a product link for that light?

I was thinking it looked like Blackstone, but didn't want to put my assumption out there. Blackstone will provide comments to the...

Who performed the analysis? Did they provide any comments on the results? Based solely on the number, I see higher than average iron...

EGR will only open when the car is running at steady state, like on the highway at cruising speed. Other than that, It will typically...

There is a tube that runs from the exhaust manifold to the intake manifold, and the valve is bolted to the underside of the intake...

The EGR valve on those engines has the tendency to collect carbon and stick open, which can cause idle droop issues, too.

Glad that worked out!