For Sale / Classifieds

Its sad to do but its been a year and even though I have made a few attempts to start this car as a project, I do not have the time as I will be going road racing next year with my Civic. The car is for sale entirely for $500 or in pieces, there is not much left but for those in Canada its probably a good way to get a rust free Protege shell. As I sell what little is left the overall price of the car will be lower. So if I sell everything I want off of it, you can get an uber clean MSP shell for $100. Anyway... MSP Wheel $100 MSP Cluster, 89,000kms $100 MSP 03.5 Pedals $100 Racing Beat Front Sway Bar $100 MSP Headlights $50 I am firm on my prices, buyer will pay shipping and if you want something small just ask and I can see if...

Four used Pirelli Cinturato P7 A/S Plus Tires 225/55-19 Set of 4 used tires, no holes, no patches, no sidewall damage. Two have approximately 7/32" tread left and two have approximately 9/32" tread left. Price shown is for the set of 4 tires. Ship by UPS to the continental United States only (48 states) via UPS, no PO Boxes, shipping charge is included in price. List Date: 7/21/2014 For more info, click here to view the original listing: Four used Pirelli Cinturato P7 A/S Plus Tires 225/55-19 -------------------------------------- On Sale For: $300.00 --------------------------------------

i have a couple parts I'm looking to sell starting of with 505 zoom crank pulley - $115 plus shipping (bought an extra for my forged motor but i decide to go with srmotorsports pulleys) Spec stage 3 clutch plus fidanza flywheel - $400 plus shipping comes with new throw out bearing and pilot bearing - SOLD 3in Turbo back - $600 - SOLD The cat back is from a vibrant tpv turbo back then the pope down pipe came and the mid pipe was made to mate them together i will also include the straight thermo stat kit from speedciruit starting with the damage Cr3 motorsport sway bar relocate kit - $55 plus shipping

Both in good condition. Will need to be repainted. $100+shipping Pics to follow later today

PRICE DROP For sale are 4 wheels off an Evo 8. In good shape, obviously used, but no real rash to speak of. Be a great candidate for a respray. $400 picked up. Rather not ship, but may be able to work something out. EDIT: Realized these look dirty as hell. Will clean up and post other pictures if asked!

Used CX-7 Excel Intake Used Custom Performance Engineering Excel Intake. I purchased in 2012 and used for 2 years and have recently removed before selling for a Honda Pilot. Everything is in good condition and have recently cleaned and oiled the filter. I am missing the bolt with the rubber bushing that mounts to the airbox as I forgot to take it off before selling. You should be able to find another rubber bushing and threaded stud at any local hardware store. No installation instructions either as these were discarded. List Date: 7/18/2014 For more info, click here to view the original listing: Used CX-7 Excel Intake -------------------------------------- On Sale For: $159.21 --------------------------------------

PM IF INTERESTED My Feedback: http://forum.***************/itrader.php?u=78785 **All prices are fair, and include shipping** -All parts are working and in good shape- MS6 Used/Working Smart Key with a new battery $100 SOLD Rear OEM MS6 shocks with 35k - $60 SHIPPED Rear OEM MS6 shocks with 55k - $50 SHIPPED SOLD OEM MS6 Transmission Mount 50k miles, working, but I would use it for a Corksport Bushing Upgrade $25 OEM MS6 chrome exhaust rings $40 SOLD OEM PCV Valve, 10k miles $15 OEM PCV-Intake Manifold tube $5 OEM Hard intake breather line $15 Installed, but unused NAPA PCV Valve $10 ATP CEL Trick Kit to $15 OEM MS3/6 Boost/MAP sensor $20 OEM MS3/6 EGR Tube with gasket $12 each 4 Denso ITV22 Plugs with 15k miles $12 SOLD SOLD...

I have 2 center caps that still have the emblems attached. They have a little surface corrosion but could be cleaned up nicely. $50 each or best offer.

I'm selling this brand new unused Samco Lower radiator hose and coolant elbow. I didn't end up needing these parts for my build. The price is 55$ shipped in the US$

Up for sale, brand new set of Konig Zero-In wheels. Never used, still in boxes. I only took one out to take pictures of it. Specs: (4 wheels) 17 x 7, Color: Matte black machine face red undercut, Offset +40 mm, Bolt pattern 5x114.3, Bore Diameter 73.1 mm. Wheels only, doesn't come with lug nuts. I purchased them for $700 brand new, selling for $500 obo, shipping Included within the US. I have a paypal account and would prefer to go that route but it's not necessary. Let me know if you're interested!!!

2001-2003 Mazda Protege ECU / Computer Used and came out of a running 2002 Protege 2.0 with Automatic tranny. List Date: 5/6/2014 For more info, click here to view the original listing: 2001-2003 Mazda Protege ECU / Computer -------------------------------------- On Sale For: $60.00 --------------------------------------

2002 Mazda Protege5 2002 Mazda Protege5 with LMLZ[\][H\LY\\Y][[X][H\H[Y]HY[\XYH\\Y[HX][XXH\\H\YYY][\\]L[\HY^K[[]\H]Y\\XH\[BB\]N LMB][[[]Y]\BB[X\HY]HY[[\[VOMVTZ[K^K[X^K\YMKLLM WLX^HYMHTVVWCBKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKCBVOMWS[HI VVWHVOHJ[X\JVVWCBBTZ[KX][X^K\YMKLLM WVSQZ]X[XY\[K^[]SQVTCBKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKCBSQZ[K[[]XKX^\ SQCBTZ[K^K[X^K\YMKLLM WVSQZ[XYX[K[XY\MXMLNMXYLYLSQVTCBTZ[K^K[X^K\YMKLLM WVSQZ[XYX[K[XY\MMXLMMLXM KNXMNX LXSQVTCBTZ[K^K...

t25 Turbo - $150 shipped. Sold!!!!!! rear Stagg Shocks and Struts - $110 shipped stock msp smic - $35 shipped a rebuilt garrett t25 journal bearing turbo already clocked just need to buy adapters to make it fit, only used for 368 miles to be exact 1 month use. reason for selling is because i saw oil leak through the seals so i bought another one and to find out later on it only needed an oil restrictor! i will include a bonjo bolt oil restrictor for the turbo. it spools and hits boost perfectly fine, and no shaft play what so ever do not need it because it is just laying around. two rear stagg shocks with the oem racing beat springs, only used for 2 months until upgraded back to tokicos with lowering springs. all prices are...

Good reliable daily driven Protege5. Runs great! I drove it to California and back last year. It does have typical fender rust that will probably need to be addressed, which is why it is priced below blue book. -tinted windows -lowering springs -Enkei weels with Yokohama S-drive tires -CAI -TWM short throw shifter -OBX racing header Extras include: -Yakima 2 bike roof rack -stock wheels with snow tires -one extra snow tire -mazdaspeed muffler [removed]

For sale: Custom painted intake manifold with High temp paint, VTCS delete, VICS screws locktight applied, cleaned all carbon build up from inside intake as well as EGR, polished reachable areas. All new gaskets. OFFERS? All of the following are Best offer. Injector set: $40 MAF: $40 Auto Shift knob: $15 Intake air charge sensor: $15 https://www.dropbox.com/s/qg9b25r6lkym6s6/IMG_20140712_223402%5B1%5D.jpg

FS-Upgraded Smic and WeaponR hard pipes I bought a msp and am selling these parts to get it running, - Pending -SOLD- - PG ETS upgrade Side Mount InterCooler --SOLD--:) - weaponR hard pipes -availableSOLD $ only if intercooler is sold first- -everything together SMIC and pipes shipped----- - The upgraded SMIC LIKE NEW this ones used less than 3000 mi like new condition. - WeaponR hard pipe kit includes all couplers and clamps shown, New there 299$ used about 3000 miles offers ??'s pm me I prefer paypal. Thanks

1989 MAZDA 323GTX Hi, I'm putting this out there now because I'll be looking to sell my MAZDA 323 GTX soon after it is done. I originally bought the car to beat EVO's then lost interest. Now I built a motor and am putting it in tuning it then I will sell it. The motor is going in now; so this is a heads up. The motor is fairly stock with ARP head and main studs. ACL RACE bearings; balanced rotating mass. Rebuilt head; new oil pump GATES Racing timing belt, JDM intake manifold, big injectors, Miata cams, T25 turbo, EVO9 intercooler, Turbonetics blowoff valve, Walbro fuel pump, etc. Whiteline urethane bushings. I will add more as I remember and write it down! Thank you for looking...

My motor blew so I need to clear out all the parts! I now the rules I need pictures I will have them up as soon as I am able to get home. Mods please don't delete. Pm with offers for stuff. If you pm me and I ask a lot I apologize I've been out of the game for a while and don't know what things cost anymore. So I'm more than happy to work out a price we are both happy with. List of things I have: I have everything that is stock! So if you need it I have it. Center Console Shift Bezel- PENDING Grill- PENDING Airbox- PENDING Things most people would have interest in: Acc bumper brackets- PENDING 4-1 headers -SOLD Progressive sway bar 16x7 rota slips with good tires Brand new front bumper- PENDING Harness bar 3" 5 point harnesses/blue...

CUSTOM CAR COVER FOR MAZDA PROTEGE5 (with custom fit car cover lock; protects entire vehicle, including rims!) Manufacturer - Big Sky Car Covers http://www.bigskycarcovers.com Product: - Noah (All-Weather Protection; Indoor or Outdoor Use; Film Barrier Technology; High-Tech; Bonded 4-Layer Composite; Non-Woven, Multi-Layer Protection; Kimberley-Clark’s Best Outdoor Fabric) Product No. - C16295NH Web-Price - US$232.77 + $20 shipping + $30 brokerage = $282.77 Price - $100 (65% off - save $182.77!!!) If interested please email seller at [removed].

Up for grabs I have a good LH driver side OEM fog light for 2000-2003 Protege sedan, comes with pig tail. will also fit Millenia 2001-2002 and the GF Australian Capella/626 $35 shipped