For Sale / Classifieds

Want To Buy / Trade

Threads
3.3K
Posts
10.6K
Threads
3.3K
Posts
10.6K

Completed Transactions

Only for viewing completed transactions.
Threads
27.9K
Posts
236.3K
Threads
27.9K
Posts
236.3K
I STILL HAVE THIS HOOD. BUY IT! PRICES LOWERED Sold my MSP before I ever could get it where I wanted, so here's some parts! DG carbon hood: Bought for $400 and got it professionally recleared for $150 year and a half ago. Was on car one month last summer. Better than new. $350 picked up. Not looking to ship. MSP 03.5 spoiler in silver. Can't remember if it's the darker or lighter silver... SOLD Aerocatch hood pins (NOT the really hard to mount ultra flush kind!) Brand new. SOLD 8mm spacers (Four of them.) SOLD] HKS SSQV (V3 I think. Someone more knowledgeable can chime in.) Red insert. Not particularly pretty. SOLD
This is a Brembo Big Brake kit I purchased for a 2003 Mazdaspeed Protege, but never used. I suspect they will fit on a variety of models. Anything with the same knuckle as the 2003 MSP (part # C10033021B, C10033031B) I was never able to use these because they didn't fit with the wheels I had. These will not fit with a stock off-set. $900.00
Sport Edition D5 16x7 Wheels Sport Edition D5 Wheels 16x7, 5-108, ET38, offset 50mm Condition of wheels 9/10, no curb rash, couple minor chips. center caps included Asking price is $200.00 obo Ad banner shipping price is an estimate. Buyer pays shipping from 60490 @ 20#/ea.via UPS. Contact 630-740-8211 List Date: 2/20/2016 Thanks for looking Joe List Date: 2/20/2016 For more info, click here to view the original listing: Sport Edition D5 16x7 Wheels -------------------------------------- On Sale For: $200.00 --------------------------------------
All parts do not include various nuts/bolts/etc. for installation. Throw me a price plus shipping and we will work it out! Shipping the exhaust is not advised as it would cost more than the sale of the part. However, if you are willing, I will ship. All items seem to be in good shape to the best of my knowledge and were removed from my car myself with good care. They have since been stored in a well insulated dry shed. Any questions let me know! 2010 Mazdaspeed 3 stock intercooler - 2010 Mazdaspeed 3 stock driver side defrost vent - 2010 Mazdaspeed 3 stock BPV - 2010 Mazdaspeed 3 stock fuel pump internals - 2010 Mazdaspeed 3 stock rear motor mount - 2010 Mazdaspeed 3 stock fog and low beam headlight bulbs - 2010...
I am selling my 2002 Mazda protg 5. It has just under 26,000 miles. There is a flying miata turbo kit installed, turbo was recently changed to a 50 trim. There is a custom mandrel bent ss 3" exhaust turbo back with a high flow cat. The fuel rail has been changed to a Jays racing flow through rail with adjustable fuel regulator. There is a b&m short throw shifter installed. There is eibach Springs installed. The interior has custom katskinz leather seats. The trim has painted fiberglass overlays. There is a custom sub enclosure in the cargo area. There is a dg motorsports carbon fiber hood and wide body. Power folding mirrors. There is 17" rwd wheels to fill the wide body. I have the factory hood available. There is a new battery...
1985 Mazda GLC Deluxe 1985 Mazda GLC Deluxe 5 speed manual 1.5l 4 cylinder ~261,200 miles Runs, but won't pass smog 1500 OBO List Date: 2/17/2016 For more info, click here to view the original listing: 1985 Mazda GLC Deluxe -------------------------------------- On Sale For: $1,500.00 --------------------------------------
FS: $500 Shipped NEW corksport catted long downpipe 80mm Corksport catted long downpipe with 80mm connection Brand new, never installed. Box is opened though as you can tell from the picture. $500 SHIPPED List Date: 2/5/2016 For more info, click here to view the original listing: FS: $500 Shipped NEW corksport catted long downpipe 80mm -------------------------------------- On Sale For: $500.00 --------------------------------------
03 Mazdaspeed Protege Hello Gents! My name is Anthony, and i have recently purchased a mazdaspeed protege. I will be parting it out, I'm located in las vegas nevada. Please call or text for a way faster response 702-485-9596. Blown head gasket aftermarket turbo kit- Condition of turbo unknown. racing beat front and rear sway bar tokico blue suspension in great condition, still very stiff full interior with exception of some rips on seats clean dash gauge cluster shift linkage clean fenders ok bumper **PLEASE CALL OR TEXT FOR FASTER RESPONSE** **PICS UPON REQUEST** List Date: 2/13/2016 For more info, click here to view the original listing: 03 Mazdaspeed Protege -------------------------------------- On Sale For: $200.00...
2002 Mazda Protege 5 Selling a Protege 5 as a parts car. Has a salvage title and a blown head gasket. Ran good before head gasket let go. Been parked for a year. List Date: 2/14/2016 For more info, click here to view the original listing: 2002 Mazda Protege 5 -------------------------------------- On Sale For: $500.00 --------------------------------------
More pics in next thread. 2002 Mazda Protg 5 in Sunlight Silver with a 5 speed manual transmission. The car has roughly 178,xxx miles on the FS-DE 2.0 engine, however it features an entirely brand new (OEM Mazda Parts) top end just installed. The car has had nearly everything you could imagine replaced with OEM or better quality parts. The list of recent maintenance includes: Engine: • New OEM Cylinder Head & Camshafts • New ARP Cylinder Head Studs • OEM Head Gasket • Mishimoto Aluminum Radiator • OEM Coolant Tank • OEM Timing Belt and All Related Components • OEM Water Pump • OEM Clutch • OEM Pressure Plate • OEM Front and Rear Motor Mounts • New NGK Plugs • New Coil Packs • New Denso Plug Wires • New Intake Boot (OEM Intake) •...
My Protege5 was hit in December on the front passenger side. I bought new a car so I don't need these parts. Progress Rear Swaybar w/ Moog Heavy Duty endlinks $old Sway bar had some surface rust so I sanded, primed and painted. Comes with sway bar bushing, but no brackets due to one of them being cracked from rust and the other being rusty as well. You can buy new brackets from Progress's website. Only ran a few thousand miles on the Moogs. 20160207_141322 by Sean McSweeney, on Flickr Stock Springs: $50 Stock Rear Sway Bar: w/ mounting brackets & bushings $40 20160207_142520 by Sean McSweeney, on Flickr Cargo Cover: $40 Cargo Net: $10 20160207_143040 by...
?AEM plug n play 1990-2005 includes boomslang! 30-1710 I am selling a Working good Aem pnp ecu for 1990- 1997 miata,comes with boomslang harness which converts the plug to be used on 98+ series 1. I bought this off mt.net 3 years ago? Was planning on running in my Festiva. Plans have changed and it's for sale. It was inspected by Aem prior to me buying and I will include receipt showing unit fully functional and serviced. series 1 comes with cable, cd, ecu and boomslang . AEM is well known for standalone computers and every shop I talked to about helping me tune all agreed they knew how to tune Aem thus made me choose Aem over the other ecus. AEM's Plug & Play Engine Management System (EMS) are for racing vehicles and plug directly...
Selling an old Protege near Belleville, Ontario for parts, etc. Make an offer: Are you looking for a first car? Winter beater? Fixer-upper? Parts vehicle? Meet Matilda: a 2003 Silver Mazda Protege LX 2.0L sedan. 4 doors, 5 seats, lots of trunk space. Air conditioning, power locks/doors/windows, keyless entry, aftermarket usb stereo. She's old but trustworthy and won't cheat on you. 235,600 km with service records and is on the road today as a daily driver. Is there rust? Yes. Yes there is. New alternator (Nov 2015). Needs front pads & rotors, and exhaust gasket to pass safety. Make me an offer! Make me a good offer and you get all 8 summer and winter tires on own rims. Would deliver between Toronto and Kingston.
Bam Shifts Custom Bamboo & Leather 6" Shift Knob (2 of 2), M10x1.25 This is the second Bam Shift bamboo shift knob I am selling. Bam Shifts is an Etsy retailer specializing in custom bamboo shift knobs. This is the second of two knobs they made me closer to when they first started selling shift knobs and when they were working mostly with leather (now they specialize in custom engravings and they've raised their prices). The shift knob has textured black leather with black stitching and silver threading to hold down the leather at the top and bottom. There is a panda face on the angled top of the shift knob. This shift knob is about 6" tall and approximately 96 grams. The threaded insert begins about 7/8" from the base. $30...
Bam Shifts Custom Bamboo & Leather 5.5" Shift Knob (1 of 2), M10x1.25 Bam Shifts is an Etsy retailer specializing in custom bamboo shift knobs. This is one of two knobs they made me closer to when they first started selling shift knobs and when they were working mostly with leather (now they specialize in custom engravings and they've raised their prices). The shift knob is black leather with silver stitching and metallic silver threading to hold down the leather. There is a panda face on the angled top of the shift knob. This shift knob is about 5.5" tall and approximately 94 grams. The threaded insert begins about 7/8" from the base. $30 shipped anywhere in the US. List Date: 2/8/2016 For more info, click here to view the...
Skunk2 Shift Knob with 5-speed pattern, M10x1.25 This is my Skunk2 shift knob with a 5-speed pattern on top. The thread pattern is M10x1.25. It is approximately 434 grams. The knob itself is in great condition with no major scratches, though the lock nut has has a few dings. $30 shipped anywhere in the US. List Date: 2/8/2016 For more info, click here to view the original listing: Skunk2 Shift Knob with 5-speed pattern, M10x1.25 -------------------------------------- On Sale For: $30.00 --------------------------------------
Back