For Sale / Classifieds

Want To Buy / Trade

Threads
3.3K
Posts
10.6K
Threads
3.3K
Posts
10.6K

Completed Transactions

Only for viewing completed transactions.
Threads
27.9K
Posts
236.3K
Threads
27.9K
Posts
236.3K
My P5 was recently totaled, so the few parts I have left are here to sell! PART PRICE (ALL ARE OBO, SHIPPING NOT INCLUDED) Valve Cover (painted with high-temp paint) $40 Intake Manifold Upper-Half (missing VICS valves) $25 Intake Manifold Upper-Half (has all VICS/VTCS valves) $30 Racing Beat Rear Swaybar $60 OEM Foglights w/hardware $70 Protege5 OEM ECU $80 Gasket For Stock Exhaust System $20 Exhaust Manifold Heat Shield (painted with high-temp paint) $30 OEM Air Intake System $50 Rear Strut Tower Bar $40 Cut Seatbelt Mounts $20 Protege5 OEM Springs $80 Fuel Sending Unit + Fuel Pump + Sock Filter $40 Beck/Arnley Fuel Sending Unit (individual) $20 Premium (brand) Fuel Pump (individual)...
Hi there my name is Robert. I owned a 2022 Mazda 3 hatchback. Last year I had purchased brand new Blizzacks , and wheels. 4 line new Bridgestone Blizzaks WS90 They are only a season old and now that I don’t have my car and moved on to a different vehicle. I’m selling them rather cheap. No issues pretty much brand new Asking $800.00 cash pick up/ maybe meet halfway pending. I live in west Newbury Ma ( close to Seabrook NH All wheels have been balanced and tpms
I'm selling my 2003.5 Titanium Gray Mazdaspeed Protege, I am the original owner. Car has ~134k miles on it and still runs and drives but has been sitting for a little over year. I've started it and drove it around the neighborhood every couple of months Probably should be trailered any distance over 30 miles. Body has a ton of rust due to 20 years of Chicago winters. All the MSP specific parts of the body are plastic and still in good shape (front lip, spoiler and side skirts). Rest of the body needs work. Mechanically the car is in good shape for it's age. Engine and trans are good, new clutch and differential at 115k miles and new Tokico Illumina adjustable shocks and springs on all 4 corners at 106k.. Everything except the...
I just put up my mazda mpv minivan i need $2000 firm ill ad my ad on ebay for info and and sale. Details its running rough may need an alternator has a new battery less than 2 months old and needs some exhaust work i think idk the engine and transmission are in great condition it regularly got me an hour away and back it is missing the middle seats but back seats are build in so you have those i smoked in this car also i would say this is a great fixer upper mechanic/enthusiast special FIRST PERSON TO OFFER $2000 gets it!! Please keep in mind i dont know anything about cars im just not sure how else to sell it and someone told me to try here. 2003 Mazda MPV WAGON | eBay
I had a 2019 CX-9 and had to sell it to get a 2021 truck. I bought this as a set to swap out every winter season for snowboarding but they have been sitting in my garage since I don't have the CX-9 anymore. Set of 4 Mounted and Balanced Winter Tires And Wheels 255/60R-18 YOKOHAMA ICEGUARD G075 XL TIRES (REG PRICE $188 each) 18X8 SPORT TUNING AT2 MT GREY Wheels (REG PRICE $201 each) With tire pressure sensors (TPS) 315MHZ TIRE PRESSURE SENSOR (4) - $55 each All for $1100, originally paid $1600 Located near Baltimore MD / Washington DC.
Looking to sell my 03 speed protege very sad... clutch went on it and with further investigation before putting a new one in realized the pinch weld along the passenger side under the ground effects was all rotted out. it is a typical new york rust bucket unfortunately previous owners did not take care of her well. So i am looking to just unload this car for a parts car as i don't have the time or really want to deal with parting it out, but will if it comes down to it.. Looking to get 2500$ obo and you must pick it up. I am located in Syracuse, NY. could deliver within reasonable distance and for a fee. (Don't contact me for parts i am not parting it out as of right now.) Motor (152,000 miles) and Turbo are good. EXTRAS... POPE...
Putting up my KL swapped Protege5 for sale. I have a build thread chronicling the swap itself here: https://mazdas247.com/forum/t/kl-swappin-protege5.123871539/ Car and I am located in the Detroit Metro area in Michigan. I bought this car after writing my last (second) Protege5 off in KY in July 2019. The car was previously in a front end accident, but this hasn't affected the alignment. I pulled my core support and crash bar off my old Pro5 and intend on that going with the car. The paint isn't in great shape; it's been resprayed, but mechanically it's sorted. I have swapped over the following parts from my second Protege5: Suspension: -Tokico Illumina struts/ Eibach Sport Springs -AWR 21mm RSB with adjustable endlinks, new rod ends...
This motor and automatic trans comes out of a 2018 Mazda 6 with only 1,400 miles! If you have a 2014-2018 Mazda 3 or 6 and are looking to throw boost at it and want a spare to build, or would like a better transmission (Mazda 6 has better gearing than the 3 transmission), and want a low-mile package deal then you found it. These motors typically sell for 2-3K just for the motor alone, with 60-100K on average from junkyards. This example has only 1,400 miles and comes with a transmission as well, which typically sells for 700-100 for the Mazda 6 trans in good condition. DM me for more details if serious, I have VIN and can ship out with great cheap rates. $3,500 located in Addison, IL
Got a few old parts kicking around from my long-sold 2003 Protege5 that I never installed. A power steering pump bought online from a wrecking site and an evaporation canister (and line/filter?) that I picked up somewhere. Getting rid of everything for free, you just pay shipping or pick-up (I'm in central Los Angeles.) Would love to find someone to take it all off my hands so it doesn't go in the dumpster and in landfill. (Forgive the lack of a sign in my pics--I forgot to throw one in, but can repost if necessary.) Thanks!
Got rid of my p5 finally, 😢, and here are a few bits I kept to sell off here. I do not have any values in mind really so just toss out what you want and we can very likely work something out. DaveB gauge ring 'clones'. A long while back someone on the forum was making these replicas and I got a set. They really make the instrument cluster look nicer. Intermittent wiper stalk out of a Ford Escape I believe. I cannot recall exactly what car I got this out of but it is plug and play. Thule fit kit for standard feet and square bars.
Lookin to sell my stash of critical maintenance items at half of my costs, these should be much higher now. Prefer local (Vancouver WA or Portland OR or any vicinity) deal, willing to meet you at half way up to 100miles. If you would drive 100 miles, I'll drive the same distance. *1ea ATF Filter *1ea Air Filter *1ea Cabin Air Filter *15ea Oil Filters (proper filter for 2.5 Turbo engines) Reason for sale - switching to Electric Asking Price is $100 for all, not including shipping cost. Price is firm if you buy the whole deal
Back