ssinstaller
Member
- :
- 2006 MazdaSpeed 6
It's not that low, but it isn't comfortable to rest your arm on the console and shift anymore.jtallon said:That was my fear as well - seems like it's so short that it's almost down INSIDE the console... Wish there was something in the middle - half way between the stock shifter and this one...
goldwing2000 said:Ok, so does this thing change the location of either of the cables or the pivot point or anything?
Or is it just 2" shorter with aluminum bushings?
Maybe it's just me but everything but the knob looks to be in the same location as stock.
jtallon said:Just installed my TWM short shifter. Very nice, but the whole shifter seems to be shifted (no pun intended) to the right in the shifter cutout - first and second gear are about at the middle of the cutout (side to side), 5th and reverse are right along the right hand side of the cutout.
Is this the way the rest of your guys TWM shifters is ? Any adjustment that can be made to pull it back to the left a bit ? I'm thinking about putting a washer or two under the metal bushings on the bottom of the right-hand side of the shift mount...
jtallon said:Just installed my TWM short shifter. Very nice, but the whole shifter seems to be shifted (no pun intended) to the right in the shifter cutout - first and second gear are about at the middle of the cutout (side to side), 5th and reverse are right along the right hand side of the cutout.
Is this the way the rest of your guys TWM shifters is ? Any adjustment that can be made to pull it back to the left a bit ? I'm thinking about putting a washer or two under the metal bushings on the bottom of the right-hand side of the shift mount...