all sold. Mods, please close 
Original HKS intake box - R-Suction decal is included (rolleyes). don't know where the CARB sticker went...
HKS filter housing - I replaced the original green 2-ply wet filter with an HKS red 2-ply wet filter. Yes, the filter is a little dirty...
HKS filters - Per HKS, the filters are to be changed, not washed and re-used. So I bought extra filters (the red color is rare, I had to wait 2 months for them!!). These two are brand new, still in their bags.
HKS MAF housing
HKS MAF to inlet pipe section
HKS couplers - I misplaced two of the original worm clamps during disassembly so I've replaced them with two extras I had lying around (larger coupler on the left). The smaller coupler on the right is the one with the minor damage. See the picture below.
HKS breather hose - this hose was included with the kit
HKS filter support bracket - this bracket helps support the intake and keeps it from moving around. A nice touch that other intakes do not have.
HKS installation instructions - DIY made easy
Cobb turbo inlet pipe
Cobb instructions and decals
Original HKS intake box - R-Suction decal is included (rolleyes). don't know where the CARB sticker went...
HKS filter housing - I replaced the original green 2-ply wet filter with an HKS red 2-ply wet filter. Yes, the filter is a little dirty...
HKS filters - Per HKS, the filters are to be changed, not washed and re-used. So I bought extra filters (the red color is rare, I had to wait 2 months for them!!). These two are brand new, still in their bags.
HKS MAF housing
HKS MAF to inlet pipe section
HKS couplers - I misplaced two of the original worm clamps during disassembly so I've replaced them with two extras I had lying around (larger coupler on the left). The smaller coupler on the right is the one with the minor damage. See the picture below.
HKS breather hose - this hose was included with the kit
HKS filter support bracket - this bracket helps support the intake and keeps it from moving around. A nice touch that other intakes do not have.
HKS installation instructions - DIY made easy
Cobb turbo inlet pipe
Cobb instructions and decals
Last edited: