Space for HID ballasts?

T

TRDMS3

Member

• Jul 9, 2010

• #1

Pardon me if I am in the wrong section, planning on getting an HID kit for my fogs. Would like to get the slim set of ballasts but where da f would I mount them anyhow? I don't plan on drilling anything at all, I hope.

Thanks.

 

S

Sport6

Member

:

2009 Subaru WRX Sedan

• Jul 9, 2010

• #2

I bought the DDM slim ballasts for the fogs which come with double sided foam tape. I stuck them to the inside of the bumper. Works fine so far.

 

T

TRDMS3

Member

• Jul 11, 2010

• #3

Thank you sir

 

S

ScrtRcR

Member

:

2007 MS3

• Jul 11, 2010

• #4

Along with the tape, I would recommend you use zip ties to ensure they don't fall off.

 

S

steviekfc

Member

• Aug 3, 2010

• #5

Can anyone please give me a step by step how to on this?
I just received mine in the mail from therpmstore and now would like to install them properly the first time haha. thanks yankee friends
Steve

 

S

Sport6

Member

:

2009 Subaru WRX Sedan

• Aug 3, 2010

• #6

1) Get under the car (preferably on jacks or ramps) and undo the splash shields that are under the foglights.
2) Unplug your factory foglights from bulbs. (squeeze pretty damn hard).
3) twist the bulb out
4)plug the new ballast into the factory bulb harness.
5)plug the bulb into the ballast
6)twist the bulb into the factory location.
7)check to make sure they work
8) secure the ballasts into desired location
9) close it all up and enjoy.

 

S

steviekfc

Member

• Aug 4, 2010

• #7

where should i mount the ballasts?

 

S

Sport6

Member

:

2009 Subaru WRX Sedan

• Aug 4, 2010

• #8

There is space next to the foglights that you can use double sided foam tape to tape them to the bumper. My ballasts came with the tape in the kit.