M mazda5guy Member Aug 13, 2008 #1 Hello, Does anyone know if they make a wiring harness for 2008 Mazda 5 . Trying to replace the radio with a Pioneer avic d2. Thanks in advance Chris
Hello, Does anyone know if they make a wiring harness for 2008 Mazda 5 . Trying to replace the radio with a Pioneer avic d2. Thanks in advance Chris
mazdadude ZOOOOOOOOOM ZOOOOOOOOOM : '16.5 Mazda CX-5 Touring Aug 13, 2008 #2 The 06-07 harness should work? I do not think the stereo changed from 07-08. You will enjoy the avic.
The 06-07 harness should work? I do not think the stereo changed from 07-08. You will enjoy the avic.
C camryman Member : Mazda5 Aug 13, 2008 #4 And if you are planning to use the steering wheel controls, you'll need to re-pin the harness (at least the one that Crutchfield sells you) so that pins 12 and 13 are wired. See this thread: http://www.mazdas247.com/forum/showthread.php?t=123701738 I moved the power antenna and the remote amp turn-on pins to pin 12 and 13 in order to tap into the steering wheel connection. TC
And if you are planning to use the steering wheel controls, you'll need to re-pin the harness (at least the one that Crutchfield sells you) so that pins 12 and 13 are wired. See this thread: http://www.mazdas247.com/forum/showthread.php?t=123701738 I moved the power antenna and the remote amp turn-on pins to pin 12 and 13 in order to tap into the steering wheel connection. TC
S stillageek Member Aug 13, 2008 #5 I got a wire harness from crutchfield. I think it was plug and play. I installed an Avic D3 in my 08 GT.
I got a wire harness from crutchfield. I think it was plug and play. I installed an Avic D3 in my 08 GT.
B Billy_JR Member Nov 30, 2008 #6 found it on this forum... http://www.mazdas247.com/forum/showthread.php?t=123701738 Last edited: Nov 30, 2008