1. Remove the circled phillips screw and pull out the door handle assembly.
2. Stick your hand up in there and push out the lock assembly from the back.
3. Remove the stock bezel by prying up on the 3 tabs that have the arrows pointing at them.
4. The new bezel will snap right on in place of the stock one.
5. Reverse order back to assembled, and you're done!
2. Stick your hand up in there and push out the lock assembly from the back.
3. Remove the stock bezel by prying up on the 3 tabs that have the arrows pointing at them.
4. The new bezel will snap right on in place of the stock one.
5. Reverse order back to assembled, and you're done!