What have you done to your MSP today?

baconbitz · 06-07-2006, 06:10 PM

So I thought if the P5's could have one of these we could to. Hopefully there are enough people doing things to their MSP's to keep this going. Ill start.

I finally got tired of my ghetto looking dual gauge pod and spent the money on a full a-pillar (thanks **********

). I'm going to paint it whenever I can get hold of some of the Krylon #3551 Classic Gray and then put it in. Im pretty sure everybody will be able to tell which is the old and which is the new. I hope to have pics of it installed by the end of the week.

vinnie mack · 06-10-2006, 11:03 AM

good stuff.. ghettoness hurts MSP's heart. Should look way better when installed. My car is bone stock so I don't do anything but wash and clean it. Today im cleaning under the hood.. that's about it.

TimerFX · 06-10-2006, 02:04 PM

well cuz of some issues with the one i just bought .... the boost guage... CAI... aftermarket SMIC ... have all been dissconnected... so yay! im back to stock minus the CF Grille but i should be putting the intercooler and boos guage back in ... i havnt decided on the cold air... i'd like to tho so i can hear my blow off again i miss my turky gobble..

MyZmZm · 06-10-2006, 02:10 PM

Quote:

Originally Posted by baconbitz

So I thought if the P5's could have one of these we could to. Hopefully there are enough people doing things to their MSP's to keep this going.

copy cat!

j/k have fun with the thread guys (and gals)! we certainly do.

MSPRCRX44 · 06-10-2006, 02:12 PM

well i just got my goldline springs in and monday i should be receiving my cf grill and installing everything next weekend. recently i just put on my new rims, check my sig.

03MSP · 06-10-2006, 02:15 PM

Just got done installing the Microtech LT10S. Haven't tried to start it yet because I'm a wimp...going to try in a few minutes.

Bala · 06-10-2006, 03:00 PM

Now I've got TWO cool threads to post in (once I actually start doin' stuff

)

jmv · 06-10-2006, 03:10 PM

i just got my apex midpipe in on wednesday, i'm waiting on the rear gasket and i'll install it.

Today, i ran a MF towel and some QD spray over it, because it got real dusty last night on an unpaved road, and we have company for my sisters wedding so i want it to look nice, but didn't have time for a full wash.

lokalmotive · 06-10-2006, 03:12 PM

I haven't done anything today but 2 days ago I installed the Rotora slotted rotors and EBC Green Stuff Brake Pads. Amazing difference over stock. I can actually have a smooth stop now.

MyZmZm · 06-10-2006, 03:26 PM

Quote:

Originally Posted by Bala de Plata

Now I've got TWO cool threads to post in (once I actually start doin' stuff

)

so get off your lazy ass and start doin' stuff already!!!!!

Bala · 06-10-2006, 03:30 PM

Quote:

Originally Posted by MyZmZm

so get off your lazy ass and start doin' stuff already!!!!!

baconbitz · 06-10-2006, 03:33 PM

Quote:

Originally Posted by lokalmotive

I haven't done anything today but 2 days ago I installed the Rotora slotted rotors and EBC Green Stuff Brake Pads. Amazing difference over stock. I can actually have a smooth stop now.

I might have to get those, my stock brakes are lumpy as no other. In a minute i'm going to head out to Sherwin Williams and see if they have the Krylon, none of the other stores around here have had it.

jmv · 06-10-2006, 03:41 PM

Quote:

Originally Posted by lokalmotive

I haven't done anything today but 2 days ago I installed the Rotora slotted rotors and EBC Green Stuff Brake Pads. Amazing difference over stock. I can actually have a smooth stop now.

so did you do all 4 corners that way?? I might consider doing that at some point.... my fronts have been making noise and i can't figure what the problem is... i redid the pads up there and got the rotors turned, but it came back.

Bala · 06-10-2006, 03:47 PM

OK! - I mounted up my Pirelli PZeros Yesterday

baconbitz · 06-10-2006, 05:55 PM

How do you like the Pirelli's?

06-07-2006, 06:10 PM	#1
baconbitz Marfan Man Join Date: Aug 2005 Location: Norcross,GA/Tampa,FL Posts: 1,271	What have you done to your MSP today? So I thought if the P5's could have one of these we could to. Hopefully there are enough people doing things to their MSP's to keep this going. Ill start. I finally got tired of my ghetto looking dual gauge pod and spent the money on a full a-pillar (thanks ********** ). I'm going to paint it whenever I can get hold of some of the Krylon #3551 Classic Gray and then put it in. Im pretty sure everybody will be able to tell which is the old and which is the new. I hope to have pics of it installed by the end of the week. Attached Thumbnails __________________ Last edited by Outlawstar98; 06-28-2009 at 02:33 PM.

06-10-2006, 11:03 AM	#2
vinnie mack need more boost aka Just SPEED'n Join Date: Feb 2006 Location: Hamilton, Ontario Posts: 287	good stuff.. ghettoness hurts MSP's heart. Should look way better when installed. My car is bone stock so I don't do anything but wash and clean it. Today im cleaning under the hood.. that's about it. __________________ 2003.5 Mazdaspeed Protege 2002 Protege 5

06-10-2006, 02:12 PM	#5
MSPRCRX44 Work In Progress Join Date: Oct 2003 Location: Palmdale, Ca Posts: 431	well i just got my goldline springs in and monday i should be receiving my cf grill and installing everything next weekend. recently i just put on my new rims, check my sig. __________________

06-10-2006, 02:15 PM	#6
03MSP Waiting to ride... Donated: $5 Join Date: Oct 2003 Location: Omaha, NE Posts: 1,276	Just got done installing the Microtech LT10S. Haven't tried to start it yet because I'm a wimp...going to try in a few minutes. __________________ MSP Now replaced with '06 MS6! Microtech LT10s--WRX 440's--HiBoost FMIC--MAM catless midpipe--Corksport S+J Pipes--PLX M-300 Wideband--Greddy Profec B Spec II--Injen SRI--RR-Racing Rear mount inserts--AWR Front M/T Mount--Greddy Type-S

06-10-2006, 03:00 PM	#7
Bala Æquitas Veritas Donated: $35 Join Date: May 2005 Location: Rio Grande Mud Posts: 2,295	Now I've got TWO cool threads to post in (once I actually start doin' stuff ) __________________

06-10-2006, 02:04 PM	#3
TimerFX Zoom to the third power Join Date: May 2006 Location: Central Valley of California Posts: 198	well cuz of some issues with the one i just bought .... the boost guage... CAI... aftermarket SMIC ... have all been dissconnected... so yay! im back to stock minus the CF Grille but i should be putting the intercooler and boos guage back in ... i havnt decided on the cold air... i'd like to tho so i can hear my blow off again i miss my turky gobble.. __________________ In jen Cold Air Intake,Turbohoses intercooler+Hardpipes, carbon fiber grille ShinaniganZ

06-10-2006, 03:10 PM	#8
jmv I gots SPICE Join Date: Oct 2005 Location: San Marcos, TX Posts: 2,381	i just got my apex midpipe in on wednesday, i'm waiting on the rear gasket and i'll install it. Today, i ran a MF towel and some QD spray over it, because it got real dusty last night on an unpaved road, and we have company for my sisters wedding so i want it to look nice, but didn't have time for a full wash. __________________

06-10-2006, 03:12 PM	#9
lokalmotive What's NOT broken? Join Date: Apr 2006 Location: Hattiesburg, MS Posts: 291	I haven't done anything today but 2 days ago I installed the Rotora slotted rotors and EBC Green Stuff Brake Pads. Amazing difference over stock. I can actually have a smooth stop now. __________________ Are you an MSP/MS3/Mazda owner in Mississippi? CLICK HERE!

06-10-2006, 03:47 PM	#14
Bala Æquitas Veritas Donated: $35 Join Date: May 2005 Location: Rio Grande Mud Posts: 2,295	OK! - I mounted up my Pirelli PZeros Yesterday __________________ Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

06-10-2006, 05:55 PM	#15
baconbitz Marfan Man Join Date: Aug 2005 Location: Norcross,GA/Tampa,FL Posts: 1,271	How do you like the Pirelli's? __________________ Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car shopping - is the MSP the best $16k "sporty car"	jdgti	MSP Archives	32	10-13-2008 10:58 AM
FS - Evil MSP vinyl ready to ship today	KBicknel	For Sale & Group Buy ARCHIVE - This Forum is READ ONLY!	7	11-28-2004 10:28 PM
MSP beats Trans Am WS6!!!!11	MikeyK 5	MSP Archives	39	10-18-2004 12:08 AM
Austin:Yellow MSP at Chick-Fil-A today - Who?	ZapWizard	Tejas (Texas)	0	04-29-2004 11:36 PM
MSP Owner buys 04 SRT-4....First Impression	loj68	MSP Lounge + Welcome area	25	04-22-2004 09:12 PM